5
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Pluggable Input / Output Solutions
SFP (Small Form-factor Pluggable) Products
As a founding member
and innovator for the Small
Form-factor Pluggable
(SFP) Multi-Source
Agreement (MSA), TE
supports the market with a
full range of SFP products.
SFP products include zSFP+,
SFP+, SFP+ Enhanced and
SFP connectors, cage
assemblies and connector
assemblies.
From the original 20 position
pluggable transceiver (PT)
connector and single port
cage, the product has
expanded rapidly to include
many other options to
increase functionality and
meet increasing bandwidth
demands. The newly
released zSFP+ product line
takes data rates to 25G/s.
Lightpipes:
TE provides a complete line
of lightpipes for single
cages, ganged (single row),
and stacked (double row)
cages across all the SFP
products.
Enhanced EMI:
As the data rates using the
SFP form factor increase,
the need for increased
EMI suppression becomes
imperative. Addressing
both cabinet and module
generated noise, the SFP
products offer both external
spring or elastomeric
gasket options for EMI
suppression.
Heat Sinks:
TE addresses the need for
increased thermal dissipa-
tion by incorporating
patented riding heat sink
technology. The riding heat
sinks use direct contact to
the pluggable module to
draw heat away from its
source.
15
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Single Port Cages and Connectors
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
Product Facts
■Full metal shield for ground-
ing and EMI suppression
■Solder and Press Fit cage
configurations available
■Single piece and two piece
cages available
■Used in conjunction with
20 pin SMT SFP Connector
■Hot Swappable
■Compatible with SFP MSA
Compliant Modules
■UL/CSA Report File E28476
Technical Documents
Instruction Sheet
408-8495 SFP Connector and
Cage Assembly
Application Specification
114-13017 SFP Connector and
2-piece Cage Assembly
114-13120 SFP Connector and Press
Fit Cage Assy
Product Specifications
108-1949 SFP Connector
108-1950 SFP Cage
SFP Standard
SFF Document INF-8074
TE offers various termination
options for SFP cages,
including press-fit, wave
solder and IR reflow com-
patible with tape and reel
packaging. The connector
is a reliable 20 position
interface offered in 0.38 µm
(15 µinch) and 0.76 µm (30
µinch) gold plating thick-
nesses. The connector is
packaged in tape and reel
for pick and place SMT
application.
The cage material is a cop-
per alloy with nickel sub-
plate and a matte tin finish.
Cages
Part Number Description Belly-to-Belly
Applications
6367034-1 SFP Cage Bottom (Reflow Solder)
6367035-1 SFP Cage Top Yes
1489669-1 Press Fit, 8 Pins Yes
1489779-1 Press Fit, 20 Pins No
1489962-1 Relow or Wave Solder, 3.55 mm Tail No
1489962-3 Relow or Wave Solder, 1.8 mm Tail No
1367629-1 Press Fit w/ Lightpipes No
1932002-1 Reflow or Wave Solder, 1.10 mm Tail No
Connectors and Dust Plugs
Part Number Description
1367073-1 20 pin, surface mount connector; 0.38 µm (15 µin) gold plating
1367073-2 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating
1658197-1 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating with contact surface treatment
1888247-1 20 pin, surface mount connector; 0.76 µm (30 µin) higher speed SFP+ compliant
1888247-2 20 pin, surface mount connector; 0.38 µm (15 µin) higher speed SFP+ compliant
1367147-1 SFP Dust Plug with AMP product logo
1367147-3 SFP Dust Plug without AMP product logo
16
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Single Port Cages and Connectors (Continued)
Pluggable Input / Output Solutions
Note: All part numbers are RoHS
compliant.
SFP Cage Top
Part Number 6367035-1
Cage top attached after
bottom is soldered
SFP Cage Bottom
Part Number 6367034-1
Cage bottom supplied in
tape and reel packaging for
SMT processing
SFP Press Fit
Cage Assembly
Part Number 1489669-1
Connector
Part Number 1367073-1
Dust Plug
Part Number 1367147-1
SFP Press Fit Cage with
Lightpipe Assembly
Part Number 1367629-1
2 Piece Cage System
17
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Ganged (Single Row) Cages
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
The Ganged SFP product
line allows for single row,
high density port designs to
maximize the horizontal I/O
space. The design allows
for belly-to-belly orientation
to maximize port density.
The lateral port-to-port
spacing is minimized to
14.25mm, compared to
Part Port PCB Belly-to-Belly Lightpipes
Number Configuration Attachment Application Included
1761014-1 1x2 Press Fit Yes No
1761007-1 1x2 Press Fit No Yes
1658744-1 1x4 Press Fit Yes No
1658723-1 1x4 Solder Tail Yes No
1761008-1 1x4 Press Fit No Yes
2143438-1 Angled 1x4 Press Fit No Yes
2149060-1 Angled 1x4 Press Fit No No
1761015-1 1x6 Press Fit Yes No
1658939-1 1x6 Press Fit No Yes
2110957-1 1x6 Press Fit
(Rear Compliant Pins) No No
2007498-1 1x6 Press Fit No No
16.25mm required spacing
between single port cages.
Port configurations include
1x2, 1x4 and 1x6, with
lightpipes optional.
Application tooling is
required for press fit config-
urations to provide support
during insertion into the
board.
Connectors and Dust Plugs
Part Number Description
1367073-1 20 pin, surface mount connector; 0.38 µm (15 µin) gold plating
1367073-2 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating
1658197-1 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating with contact surface treatment
1888247-1 20 pin, surface mount connector; 0.76 µm (30 µin) higher speed SFP+ compliant
1888247-2 20 pin, surface mount connector; 0.38 µm (15 µin) higher speed SFP+ compliant
1761394-1 SFP Dust Plug
Technical Documents
Instruction Sheet
408-8848 SFP Cage Assembly
Seating Tool
408-8849 SFP Cage Assembly
Extraction Tool
Application Specification
114-13017 SFP Connector and
2-piece Cage Assembly
114-13120 SFP Connector and
Press Fit Cage Assy
Product Specifications
108-1949 SFP Connector
108-1950 SFP Cage
Product Facts
■Full metal shield for ground-
ing and EMI reduction
■Solder and Press Fit
configurations available
■Used in conjunction with
20 pin SMT SFP Connector
■Hot Swappable
■Compatible with SFP MSA
Compliant Modules
■UL/CSA Report File E28476
■Application tooling avail-
able for press fit SFP cages
Lightpipe Assembly
Part Port PCB
Number Configuration Attachment
1761011-1 1x2 Press Fit
1761012-1 1x4 Press Fit
1761013-1 1x6 Press Fit
18
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Stacked (Dual Row) Cage/Connector Assemblies
Pluggable Input / Output Solutions
The Stacked SFP product
maximizes port density by
Taking advantage of the
reduced port spacing of
the ganged SFP cages, with
an added upper port row.
The connector is integrated
into the cage assembly,
using press-fit technology
for one-step insertion for
cage and connector.
Two heights are offered for
stacked SFP cages, and
available in 2x1, 2x4, and
2x6 port configurations.
Technical Documents
Instruction Sheet
408-8848 SFP Cage Assembly
Seating Tool
408-8849 SFP Cage Assembly
Extraction Tool
408-8850 Stacked SFP
Connector Extraction Tool
Application Specification
114-13103 Stacked SFP Connector
& Cage Assembly
Product Specifications
108-2161 SFP Connector &
Cage Assemblies
Product Facts
■Utilizes integrated stacked
connector with patented
wafer construction
■Full metal shield for ground-
ing and EMI reduction
■Incorporates press fit eye-
of-the-needle contacts for
both mechanical cages and
electrical connector
■Hot Swappable
■Compatible with SFP MSA
Compliant Modules
■Application tooling
available
■UL/CSA Report
File E28476
R
R
19
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Stacked (Dual Row) Cage/Connector Assemblies (Continued)
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
Standard Profile 2x4
Configuration
Part Number 1658390-1
Low Profile 2x4
Configuration
Part Number 1658629-1
Part Port Height Lightpipes
Number Configuration Profile Included
1658391-1 2x1 Standard No
1658628-1 2x1 Low Profile No
1658859-1 2x1 Low Profile Yes
1658390-1 2x4 Standard No
1658629-1 2x4 Low Profile No
1658758-1 2x4 Low Profile Yes
1761327-1 2x6 Standard No
1658894-1 2x6 Low Profile No
1658895-1 2x6 Low Profile Yes
Note: TE lightpipe assemblies are packaged with the SFP cage assembly.
The lightpipes attach to the top of the SFP cage for clear visibility in a
high density application.
Related Products
Part Number Description
1761394-1 SFP Dust Plug
22.3 mm
25.25 mm
20
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Cages with Integrated Connectors
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
For increased flexibility, TE
offers ganged (single Row)
SFP cages with integrated
connectors that are footprint
compatible with its Stacked
SFP product line. The
connector uses the same
press fit technology as
incorporated in the stacked
SFP cage/connector sys-
tem, with one-step insertion
in the board. Products
currently offered are 1x1
and 1x4 configurations.
Technical Documents
Instruction Sheet
408-8848 SFP Cage Assembly
Seating Tool
408-8849 SFP Cage Assembly
Extraction Tool
408-8850 Stacked SFP Connector
Extraction Tool
Application Specification
114-13121 SFP Ganged Press Fit
Connector &
Cage Assembly
Product Specifications
108-2161 SFP Connector &
Cage Assembly
Product Facts
■Utilizes fully integrated 20
position SFP connector
■Full metal shield for ground-
ing and EMI reduction
■Incorporates press fit eye-
of-the-needle contacts for
both mechanical cages and
electrical connector
■Hot Swappable
■Compatible with SFP MSA
Compliant Modules
■Application tooling
available
■UL/CSA Report
File E28476
R
R
Part Number 1932069-1
Part Number 1932068-1
Port Footprint Press Fit Exemption
Part Number Configuration Compatible with Tin Lead
Stacked SFP on I/O Contacts
1932068-1 1x1 1658391-1 Yes
1658628-1
1932069-1 1x4 1658390-1 Yes
1658629-1
Related Products
Part Number Description
1761394-1 SFP Dust Plug
21
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Cages with Riding Heat Sinks
Pluggable Input / Output Solutions
Note: All part numbers are RoHS
compliant.
Product Facts
■Designed for DWDM Switch
applications
■High Density application
requiring additional
Thermal Management
■Riding heat sink technology
addresses thermal
management
■Full metal shield for ground-
ing and EMI reduction
■Incorporates press fit
eye-of-the-needle contacts
for mechanical cages
■Compatible with DWDM
MSA compliant transceivers
■Uses 20 pin SMT SFP
Connector
TE introduced an SFP sys-
tem incorporating a riding
heat sink to help manage
excess heat when using
SFP modules. This is espe-
cially suited for use with
higher wattage transceivers,
such as long reach applica-
tions like Dense Wavelength
Division Multiplexing
(DWDM).
The system features a press
fit cage, a heat sink clip,
and heat sink with various
pin heights available.
Cages, Heat Sinks, and Clips
Part Number Product Description
1367643-1 1x1 SFP Cage for heat sink application
1367646-1 Heat Sink Clip
1829903-2 PCI Heat Sink (4.2mm)
1829904-2 SAN Heat Sink (6.5mm)
1829905-2 Networking Heat Sink (13.5mm)
1367645-1 Kit: Cage, Clip and PCI Heat Sink (4.2mm)
1367645-2 Kit: Cage, Clip and SAN Heat Sink (6.5mm)
1367645-3 Kit: Cage, Clip and Networking Heat Sink (13.5mm)
Connectors and Dust Plugs
Part Number Description
1367073-1 20 pin, surface mount connector; 0.38 µm (15 µin) gold plating
1367073-2 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating
1658197-1 20 pin, surface mount connector; 0.76 µm (30 µin) gold plating with contact surface treatment
1888247-1 20 pin, surface mount connector; 0.76 µm (30 µin) higher speed SFP+ compliant
1888247-2 20 pin, surface mount connector; 0.38 µm (15 µin) higher speed SFP+ compliant
1367147-1 SFP Dust Plug with AMP product logo
1367147-3 SFP Dust Plug without AMP product logo
SFP Angled Assemblies
Part Number Port Configuration Description
2143438-1 1x4 30 Degree with Lightpipes
PCI is a trademark of PCI-SIG.
Product Facts
■SFP angled cages provide
better cable routing than the
standard SFP cages
22
Catalog 1773408-1 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
SFP Copper Cable Assemblies
Pluggable Input / Output Solutions
Note: All part numbers are RoHS compliant.
Product Facts
■SFF 20 position PCB
interface
■Cable wire size 28 AWG
■Robust pull to release latch
mechanism
■Various standard cable
assembly lengths
■Compatible with MSA
compliant SFP cages
■Uses MADISON CABLE
brand TURBOTWIN copper
cable
Applications
■Switches, routers and host
bus adapters (HBA’s)
■Enterprise storage
■High density I/O’s
■Multiple channel
interconnects
The TE SFP copper cable
assemblies are high speed,
high performance solutions
for 4.25 Gbps applications.
The TE SFP copper
assemblies provide a
cost effective solution over
Fiber for short reach I/O
applications. These
assemblies support multiple
data transfer protocols such
as Fibre Channel, InfiniBand
Standard and Gigabit
Ethernet.
SFP Direct Attach Cable Assembly Part Numbers
Description Part Number Length Equalization
1948134-1 0.5 m Unequalized
1948134-2 1 m Unequalized
4.25 Gbps Passive 1948134-3 2 m Equalized
1948134-4 3 m Equalized
1948134-5 4 m Equalized
Fibre Channel is a trademark of the Fibre
Channel Industry Association.
INFINIBAND is a trademark of the
InfiniBand Trade Association.
