Robust Slave Module HSL-AI16-M-T 16-CH Temperature Input Module Specifications Slave ID consumption: 2 LED indicator: Power and Link Power supply required: 10V to +30VDC 16-CH single-ended or 8-CH differential analog inputs(Jumper Select) Resolution: 16-bit Unit Conversion: Thermocouple, mV, V or mA Input range programmable 6 levels(Bipolar): 2.5V, 1V, 500mV, 100mV, 50mV, 15mV, 20mA Input range programmable 6 levels (Unipolar): 2.5V, 1V, 500mV, 100mV, 50mV, 15mV, 20mA Input range (Thermocouple Type, both Unipolar and Bipolar) : J, K, T, E, R, S, B, N, C J: 0C~760C T: -100C~400C R: 500C~1750C B: 500C~1800C C: 0C~2320C K: 0C~1370C E: 0C~1000C S: 500C~1750C N: -270C~1300C Sampling Rate(all channels) : 100Hz HSL Real-time Remote I/O HSL-AI16A02-M-VV/-AV 16-CH Analog Input /2 Analog Output Module Specifications Slave ID consumption: 2 16-CH single-ended or 8-CH differential analog input 2-CH Single-ended analog output AD Resolution: 16-bit (14-bit guarantee) DA Resolution: 16-bit AD Voltage Input Range: 10V, 5V, 2.5V, 1.25V AD Current Input Range: 20mA AD Conversion Time: 10 s DA Settling Time: 10 s Over-voltage protection:30V LED indicator: Power and Link Power supply: +22V to +26VDC Operating temperature: 0 to 60C Storage temperature: -20 to 80C Power consumption: 1.8W HSL-TB32-M-DIN 32-CH I/O Terminal Base Specifications Field I/O wiring connection for HSL I/O modules Spring terminal for easy field wiring Power and ground included for each signal channel Interlocking design for rugged installation Power LED indicator DIN rail mounting Terminator resistor on board I/O Wire Gauge: 20 AWG. (max.); 28AWG. (min.) Power supply: 10V to +30VDC HSL-DI8DO8-C-NN 8-CH Discrete Input 8-CH Discrete Output Module Specifications Slave ID consumption: 1 8-CH digital input and 8-CH digital output 4-5 -NN: for NPN sinking type sensor input or dry contact and NPN sinking type output Photo couple isolation voltage: 2500Vrms Input impedance: 4.7K Input current: 10mA (Max) , 12.5mA (Peak) Input voltage: 40V (Max) Output switching capacity: Single channel 500mA; all channels 60mA at 24VDC Output response time: ON OFF: 180s, OFF ON: 1.2s LED indicator: Power, Link and I/O status On board field I/O wiring connection for HSL I/O modules Spring terminal for easy field wiring Power and ground included (each pair of power/ground was shared by two I/O points) DIN rail mounting Terminator on board I/O Wire Gauge: 16 AWG. (max.); 24AWG. (min.) Power supply: 10V to +30VDC Operating temperature: 0 to 60C Storage temperature: -20 to 80C Power consumption: 1.4W Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: HSL-DI8DO8-C-NN