HSL Real-time Remote I/O
Robust Slave Module
4-5
HSL-AI16-M-T
16-CH Temperature Input Module
Specifications
◆Slave ID consumption: 2
◆LED indicator: Power and Link
◆Power supply required: 10V to +30VDC
◆16-CH single-ended or 8-CH differential
analog inputs(Jumper Select)
◆Resolution: 16-bit
◆Unit Conversion: Thermocouple, mV, V or mA
◆Input range programmable 6 levels(Bipolar):
±2.5V, ±1V, ±500mV, ±100mV, ±50mV,
±15mV, ±20mA
◆Input range programmable 6 levels (Unipolar):
±2.5V, ±1V, ±500mV, ±100mV, ±50mV,
±15mV, ±20mA
◆Input range (Thermocouple Type, both
Unipolar and Bipolar) :
J, K, T, E, R, S, B, N, C
J: 0°C~760°C
T: -100°C~400°C
R: 500°C~1750°C
B: 500°C~1800°C
C: 0°C~2320°C
K: 0°C~1370°C
E: 0°C~1000°C
S: 500°C~1750°C
N: -270°C~1300°C
◆Sampling Rate(all channels) : 100Hz
HSL-AI16A02-M-VV/-AV
16-CH Analog Input /2 Analog
Output Module
Specifications
◆Slave ID consumption: 2
◆16-CH single-ended or 8-CH differential
analog input
◆2-CH Single-ended analog output
◆AD Resolution: 16-bit (14-bit guarantee)
◆DA Resolution: 16-bit
◆AD Voltage Input Range: ±10V, ±5V, ±2.5V, ±1.25V
◆AD Current Input Range: ±20mA
◆AD Conversion Time: 10 µs
◆DA Settling Time: 10 µs
◆Over-voltage protection:±30V
◆LED indicator: Power and Link
◆Power supply: +22V to +26VDC
◆Operating temperature: 0 to 60°C
◆Storage temperature: -20 to 80°C
◆Power consumption: 1.8W
◆DIN rail mounting
◆Terminator resistor on board
◆I/O Wire Gauge: 20 AWG. (max.);
28AWG. (min.)
◆Power supply: 10V to +30VDC
◆On board field I/O wiring connection for
HSL I/O modules
◆Spring terminal for easy field wiring
◆Power and ground included (each pair of
power/ground was shared by two I/O points)
◆DIN rail mounting
◆Terminator on board
◆I/O Wire Gauge:
16 AWG. (max.); 24AWG. (min.)
◆Power supply: 10V to +30VDC
◆Operating temperature: 0 to 60°C
◆Storage temperature: -20 to 80°C
◆Power consumption: 1.4W
HSL-TB32-M-DIN
32-CH I/O Terminal Base
Specifications
◆Field I/O wiring connection for HSL I/O
modules
◆Spring terminal for easy field wiring
◆Power and ground included for each signal
channel
◆Interlocking design for rugged installation
◆Power LED indicator
HSL-DI8DO8-C-NN
8-CH Discrete Input 8-CH
Discrete Output Module
Specifications
◆Slave ID consumption: 1
◆8-CH digital input and 8-CH digital output
-NN: for NPN sinking type sensor input or dry
contact and NPN sinking type output
◆Photo couple isolation voltage: 2500Vrms
◆Input impedance: 4.7KΩ
◆Input current: ±10mA (Max) , ±12.5mA (Peak)
◆Input voltage: ±40V (Max)
◆Output switching capacity: Single channel
500mA; all channels 60mA at 24VDC
◆Output response time: ON OFF: 180µs,
OFF ON: 1.2µs
◆LED indicator: Power, Link and I/O status
