GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 16 A 240 VAC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C
Resistance 500 VDC 50% RH
Dropout Greater than 10% of nominal coil voltage (DC)
Greater then 15% of nominal coil voltage (AC)
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 100°C (212°F)
Storage -40°C (-40°F) to 130°C (266°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 14 grams
AZ
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A, 1 Form B)
Ratings Resistive load:
Max. switched power: 480 W or 4432 VA
Max. switched current: 16 A
Max. switched voltage: 150* VDC or 440 VAC
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR 16 A at 277 VAC resistive, 50k cycles [1]
16 A at 277 VAC resistive, 100k cycles [3]
1 HP at 250 VAC [1]
1 HP at 277 VAC, 40°C (1 Form A) [1]
1/2 HP at 125 VAC [1]
TV-5 at 125 VAC [1]
16 A at 277 VAC resistive, 75k cycles [2]
B300 Pilot Duty [2]
R300 Pilot Duty [2]
VDE 16 A at 250 VAC resistive [1] and [2]
Contact factory for additonal VDE ratings
[1] Silver cadmium oxide, [2] Silver tin oxide
[3] Silver nickel
Material Silver cadmium oxide or silver tin oxide or silver
nickel. Gold plating available
Resistance < 50 milliohms initially (using 6 V 1 A method)
AZ762
16 A SPDT MINIATURE
POWER RELAY
FEATURES
•Dielectric strength 5000 Vrms
•Low cost
•Epoxy sealed versions available
•AC and DC coils
•16 Amp switching
•High inrush version available (80 A)
•Class B (130°C) standard
•Class F (155°C) versions available
•Isolation spacing greater than 10 mm
•UL, CUR file E44211, VDE 40006031
COIL
Power
At Pickup Voltage 196 mW (DC)
(typical) 0.43 VA (AC)
Max. Continuous
Dissipation 1.7 W at 20°C (68°F) ambient
Temperature Rise 26°C (47°F) at nominal coil voltage
Max. Temperature 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
9/25/13