AccutrimTM 1240 (RJ26 Style) Vishay Foil Resistors Bulk Metal(R) Foil Technology Ultra High Precision Trimming Potentiometers, 1/ " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of 4 MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output FEATURES 1240W 1240X INTRODUCTION Resistance Resistance Vishay Foil precision trimmers have the Bulk Metal(R) Foil resistive element which possesses a unique inherent temperature and load life stability. Plus, their advanced virtually back lash-free adjustment mechanism makes them easy to set quickly and accurately and keeps the setting exactly on target. BULK METAL FOIL WIREWOUND Resistance 1240P * Temperature coefficient of resistance (TCR): 10 ppm/C. (- 55 C to + 150 C ref. at + 25 C); through the wiper (3); 25 ppm/C (see table 2 for low values) * A smooth and unidirectional resistance with leadscrew adjustment * Load life stability: 0.1 % typical R, 1.0 % maximum R under full rated power at + 85 C for 10 000 h * Settability: 0.05 % typical; 0.1 % maximum * Setting stability: 0.1 % typical; 0.5 % maximum, DSS * Power rating: 0.25 W at + 85 C * Resistance range: 5 to 10 k * Tolerance: 5 %, 10 % * Electrostatic discharge (ESD) up to 25 000 V * Terminal finish: gold plated (tin/lead finish is available on request) CERMET Wiper Travel Wiper Travel Wiper Travel TABLE 1 - MODEL SELECTION MODEL 1240 TERMINATION STYLE W-edge mount, top adjust X-edge mount, side adjust P-horizontal mount, side adjust AVERAGE WEIGHT (g) POWER RATING at + 85 C AMBIENT NO. OF TURNS 0.4 0.25 W 21 2 Note * See Figure 1, next page TABLE 2 - 1240 (RJ26) SERIES ELECTRICAL SPECIFICATIONS Temperature Coefficient of Resistance (TCR) 50 to 10 k End-to-end (2) 10 ppm/C maximum (- 55 C to + 150 C, + 25 C ref.) Temperature Coefficient of Resistance 5, 10 and 20 20 ppm/C Through the wiper (3) Stability Load life at 10 000 h End-to-end (2) Power Rating (4) Settability Setting Stability Contact Resistance Variation - CRV (noise) (5) Hop-off High-Frequency Operation Rise time Inductance Capacitance Operating Temperature Range Document Number: 63053 Revision: 26-Mar-09 25 ppm/C 0.1 % typical R 1.0 % maximum R (under full rated power of 0.25 W at + 85 C) 0.25 W at + 85 C 0.05 % typical; 0.1 % maximum 0.1 % typical; 0.5 % maximum 3 typical; 10 maximum 0.25 % typical; 1.0 % maximum 1.0 ns without ringing 0.08 H typical 0.5 pF typical - 55 C to + 150 C TABLE 3 - VALUES VS. TOLERANCES STANDARD RESISTANCE VALUES (in ) STANDARD TOLERANCE 5, 10 10 % 20, 50, 100, 200, 500, 1K, 2K, 5K, 10K 5% TABLE 4 - MECHANICAL SPECIFICATIONS Adjustment Turns 21 2 Mechanical Stops Wiper idles - no discontinuity Internal Terminations All welded - no flux Case Material 1240X - diallyl-phthalate: green (DAP) 1240W - diallyl-phthalate: green (DAP) 1240P - thermoplastic: black Shaft Torque 3 oz. in. maximum Backlash 0.005 % typical For any questions, contact: foil@vishay.com www.vishay.com 1 AccutrimTM 1240 (RJ26 Style) Vishay Foil Resistors FIGURE 1 - SCHEMATIC AND DIMENSIONS in Inches (Millimeters) 1240X 1240W 0.050" (1.27 mm) C 0.040" (1.02 mm) C 0.040" (1.02 mm) C VISHAY 2 0.250" (6.35 mm) D 0.250" (6.35 mm) D VISHAY 1 CW 3 3 1 CW 1 2 2 3 0.250" (6.35 mm) D 3 2 1 0.250" (6.35 mm) D 0.050" (1.27 mm) C 0.100" (2.54 mm) A 0.050" (1.27 mm) C 0.010" (0.25 mm) A 0.050" (1.27 mm) C 0.175" (4.45 mm) C 0.100" (2.54 mm) A 0.175" (4.45 mm) C 0.050" (1.27 mm) C 0.100" (2.54 mm) A 0.050" (1.27 mm) C 0.100" (2.54 mm) A 0.125" (3.18 mm) C 0.125" (3.18 mm) C (bottom view) (bottom view) 1240P 0.050" (1.27 mm) C VISHAY 0.175" (4.45 mm) C CW 1 1 2 3 TOLERANCES: STANDARD MARKING: A = 0.005" (0.13 mm) Model No. C = 0.010" (0.25 mm) Date Code D = 0.020" (0.51 mm) Resistance Value 3 Tolerance 0.250" (6.35mm) D 0.055" (1.40 mm) C 0.035" (0.89 mm) C 0.016" (0.41 mm) A NOTES: Adjustment screw 0.080" (2.03 mm) diameter with Resistance Value Tolerance 0.025" (0.64 mm) X 0.030" (0.76 mm) slot. Tolerance on 0.100" (2.54 mm) A 0.250" (6.35 mm) D 0.125" (3.18 mm) C screw dimensions is 0.005" (0.13 mm). Model 1240 has gold plated terminal pins 0.016" (0.41 mm) 0.001" Model No. Date Code 0.100" (2.54 mm) A FIGURE 2 - POWER DERATING CURVE (0.03 mm) diameter, 0.200" (5.08 mm) length minimum. FIGURE 3 - 1240W 10 k LOAD LIFE, 20 UNITS, 10 000 h at 0.25 W, + 85 C (Wiper at CW) + 85 C + 100 + 1500 + 1000 + 75 R/R (ppm) Percent of Rated Power + 2000 + 50 + 25 0 - 75 + 500 0 - 500 - 1000 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 - 1500 Ambient Temperature C - 2000 0 2000 4000 6000 8000 10 000 Time (h) www.vishay.com 2 For any questions, contact: foil@vishay.com Document Number: 63053 Revision: 26-Mar-09 AccutrimTM 1240 (RJ26 Style) Vishay Foil Resistors TABLE 5 - COMPARISON TEST GROUP I Conditioning Contact resistance variation - CRV (noise) Immersion TEST GROUP I a Visual and mechanical Actual effective electrical travel End resistance Dielectric withstanding voltage - DWV Per MIL-STD-202, methods 301 and 105 Atmospheric pressure Barometric pressure Insulation resistance Shaft torque Thermal shock Setting stability TEST GROUP II Solderability TEST GROUP III Resistance temperature characteristic - TCR Moisture resistance Contact resistance variation - CRV (noise) TEST GROUP IV Settability Shock Setting stability Vibration Setting stability Contact resistance variation - CRV (noise) Salt spray TEST GROUP V Solder heat Low-temperature operation Setting stability Low-temperature storage High-temperature exposure Setting stability Contact resistance variation - CRV (noise) Integrity of shaft TEST GROUP VI Rotational life (200 cycles) Contact resistance variation - CRV (noise) Terminal strength TEST GROUP VII Life (2000 h) at + 85 C Life (10 000 h) at + 85 C TEST GROUP VIII Solvent resistance MIL-PRF-39035/3 CHARACTERISTIC H (6) MODEL 1240 MAXIMUM 1.0 % 3.0 % or 3 (7) No continuous stream of bubbles 0.5 % 3 typical, 10 maximum No continuous stream of bubbles No failures 10 to 25 turns 2 % or 2 (7) No failures 21 2 turns 2 for values 1 k; 5 for values 2 k; 600 VAC, 1 min 250 VAC, 1 min 1000 M 3 oz. in. maximum 1.0 % 1.0 % 600 VAC, 1 min 250 VAC, 1 min > 1000 M 3 oz. in. maximum 0.5 % 0.5 % Per MIL-STD-202, method 208 Per MIL-STD-202, method 208 0.005 %/C ( 50 ppm/C) 1.0 % 3.0 % or 3 (7) 0.001 %/C ( 10 ppm/C) 0.5 % 3 typical, 10 maximum 1.0 % 1.0 % 1.0 % 1.0 % 1.0 % 3.0 % or 3 (7) No corrosion 0.1 % 0.5 % 0.5 % 0.5 % 0.5 % 3 typical, 10 maximum No corrosion 1.0 % 1.0 % 2.0 % 1.0 % 3.0 % 2.0 % 3 % or 3 (7) No loosening or breakage 0.1 % 0.5 % 0.5 % 0.5 % 0.5 % 0.5 % 3 typical, 10 maximum No loosening or breakage 2.0 % 3 % or 3 (7) 2 lbs. 2.0 % 3 typical, 10 maximum 2 lbs. 3.0 % 5.0 % 0.1 % typical, 1.0 % maximum 0.1 % typical, 1.0 % maximum No failures No failures Notes (1) Maximum is 1.0 % A.Q.L. standard for all specifications except TCR. (For TCR information, see notes 2 and 3.) (2) Maximum TCR applies to the 3 (sigma) limit or 99.73 % of a production lot. (Measured end-to-end with wiper off the element.) (3) Measurements of TCR through the wiper are influenced more by setting stability and the percentage of the total resistance in use (at the wiper) than by fundamental resistance change due to temperature alone. The parameter shown in table 2 is a 2 s distribution typifying the behavior of the device when used with 40 % or more of the total resistance in use. (4) Derated linearly for full power at + 85 C to zero power at + 150 C. See Figure 2 on previous page. (5) Independent of resistance value. 3 maximum available on special request. (6) All R's are measured to the tolerance specified + 0.01 . (7) Whichever is greater. Special Available Options: Special marking Burn-in and screening operations. Document Number: 63053 Revision: 26-Mar-09 VISHAY TRIMMERS ARE INSPECTED 100 % for: * Immersion * Resistance tolerance check * End resistance * Visual-mechanical * Dynamic tests for continuity, CRV By sample for: * TCR * DWV For any questions, contact: foil@vishay.com www.vishay.com 3 AccutrimTM 1240 (RJ26 Style) Vishay Foil Resistors TABLE 6 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y4053500R000J0L (preferred part number format) DENOTES PRECISION VALUE CHARACTERISTICS (1) Y R= K = k 0 = gold plated termination (lead (Pb)-free) 1 to 999 = custom Y 4 0 5 3 5 0 0 R 0 0 0 J 0 L PRODUCT CODE TOLERANCE PACKAGING 4053 = 1240W 5053 = 1240X 0053 = 1240P J =5% K = 10 % L = foam/box pack FOR EXAMPLE: ABOVE GLOBAL ORDER Y4053 500R000 J 0 L: TYPE: 1240W VALUE: 500.0 ABSOLUTE TOLERANCE: 5.0 % TERMINATION: gold plated termination (lead (Pb)-free) PACKAGING: foam/box pack HISTORICAL PART NUMBER: 1240W 500R00 J B (will continue to be used) 1240W 500R00 J B MODEL RESISTANCE VALUE TOLERANCE 1240W 1240X 1240P 500R00 = 500.0 J =5% K = 10 % PACKAGING B = foam/box pack Note (1) For non-standard requests, please contact application engineering. www.vishay.com 4 For any questions, contact: foil@vishay.com Document Number: 63053 Revision: 26-Mar-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1