DATE REV ECN APP'D. BY 2/3/08 | Bl | 7458 M BOTTOM SURFACE OF JACK (PCB SURFACE) 6-27-06 | B2 | 758! TRM ( 2.406 [61.11] ) l 1-8-07 | B3 | 7892 TRM 1.103 [28.02] MAX, 2.329 [59.16] MAX. ( 148 [3.76] ) TO HIGHEST POINT OF BEAM | ( 850 [15.97] } [ PIN NO. 1 ps ( 1.063 [27.00] ) 1.004 [25.50] MAX. => ( .023 [0.57] ) e 125 [3.18] +.010 [0.25] ( 153 [3.89] ) | | ) " IOGLUTT UTC UUEETTT TTTTTT EF UN Ua oP PIN NO. 1 (085 [2-12] ) 040 [1.02] TP=| Ls .020 [0.51] 2.100 [53.34] POINT OF BEAM }.050 [1.27] (2) NOTES: 243 [6.17] 1. CONNECTOR MATERIALS: " HOUSING: THERMOPLASTIC UL94 V-0 CONTACTS/SHIELD: COPPER ALLOY CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER B g ( .212 [5.38] ) L | Uae =| 423 [10.74] - ] elo SHIELD PLATING: NICKEL OR TIN | L | 2. FOR PRODUCT SPECIFICATION SEE PRO22-01. io 2h coy 3, DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68. if! 35 7 4, THE SUGGESTED PANEL OPENING IS INTENDED 0 GIVE J USER THE ABILITY TO HAVE REASONABLE JACK /PANEL ay | oF Fad ee et | CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. + 4 + + + + + 4 + + + + THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION + at gt ot + at ot ot + at gt ot + at ot ot | | BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF i 1 I 1 T 1 r 1 T , LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES, Trae CCT BE , y arr a iI iret , yi arr | 5, DESIGNED FOR CATEGORY 5/Se APPLICATIONS. a shal? 7 8 ehh? re 8 shal? ry 8 ehh? | 2 Ui? st 3 if 7* 5" 3 ih Tt 5* 3 th 7* 5" 3" 1 7 1 ! XY ( 040 [1.00] ) TP. 3 50 MICRO-INCHES [1.27um] SS73100-073 SEE PIN DETAIL , , *------ -- CONTACT PLATING oN DETAL PART NUMBER TE ALL PORTS IN MATING AREA REV. 6/3/05 THIRD ANGLE PROJECTION Cane tam) ne Bel Stewart Connector , , , 11118 Susquehanna Trail South i) es Glen Rock, PA 17327-9199 jl (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWNG |" HIGH PERFORMANCE SHIELDED STACK JACK, 8 PORTS (4 ON 4) CHANGE MTHOUT NOTICE EIGHT CONTACT, EIGHT POSITION, 50 MICROINCHES GOLD DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUBNECT MATTER SHOWN THEREON |ORNBY: ),- | DATED ny ge UNLESS OTHERWISE SPECIFIED | ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: DATE TOLERANCES ARE +.005 [0.13] TRM 7-29-98 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN = = = = - SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT |DWG NO. REV. 1 OF 2 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. CT/30079 B3 2 | AutoCAD REV. 6/3/05 9.035 [0.89] +.003 [0.08] (64) ue 1.150 [29.21] _1 je 1,075 [27.31] pag 4.700 [43,18] > jg 1.625 [41.28] g.006 [0.15] L600 [15.24] mI (9) 9.062 [1.57] +.003 [0.08] = 525 [13.34] ove [0.15] tr [1.27] Oe = @ -@ |o 000 000 0000 J | 000 #000 #000 RF = 6 }lloooo 0000 0000 qt YT B 2S o oO xO 00 o0o0$0 rs 084 [2.13] =| |~- \SEE DETAIL A PIN NO. 1 | my 8 PLACES BOTTOM ROW f 132 [3.33] J #126 [3.20] (2) 5 | | .006 [0.15] S110 [2.79] 4 2.100 [53.34] oO co 159 [4.04] L A48 [11.3 231 [5.87] 2.268 [57.61] 180 [4.57] 2.320 [58.93] | ______ 2.356 [59.84] _> P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. te 1.030 [26.16] SUGGESTED PANEL OPENING N.T.S. (4) R.O10 [0.25] MAX. S L 015 [0.38] TOP OF PCB TO BOTTOM OF OPENING ~| .350 [8.89] a] ( .350 [8.89] ) .100 [2.54] TYP. 050 [1.27] TYP. ( 9.035 [0.89] ) (8) TYPICAL HOLE LAYOUT THIRD ANGLE PROJECTION =] Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE * HIGH PERFORMANCE SHIELDED STACK JACK, 8 PORTS (4 ON 4) EIGHT CONTACT, EIGHT POSITION, 50 MICROINCHES GOLD DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON | DRN BY: DATE 7_94_98 UNLESS OTHERWISE SPECIFIED | ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: DAT 7_99-98 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBECT [DWG NO. REV. 2 OF 2 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. BS | AutoCAD