NPN SILICON PLANAR EPITAXIAL TRANSISTOR CSC2786
TO-92
Plastic Package
For use in FM RF Amplifier
ABSOLUTE MAXIMUM RATINGS (Ta=25ºC)
DESCRIPTION
SYMBOL
UNITS
Collector Emitter Voltage VCEO V
Collector Base Voltage VCBO V
Emitter Base Voltage VEBO V
Base Current IBmA
Collector Current ICmA
Power Dissipation @ Ta=25ºC PCmW
Junction Temperature TjºC
Storage Temperature Range Tstg ºC
ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise)
DESCRIPTION
SYMBOL
TEST CONDITION
MIN
TYP
MAX
UNITS
Collector Cut Off Current
ICBO
VCB =30V, IE = 0
100 nA
Emitter Cutoff Current IEBO VEB =4V, Ic = 0 100 nA
Collector Emitter Saturation Voltage VCE(sat) IC = 10mA, IB = 1.0mA 0.30 V
Base Emitter On Voltage VBE(on) VCE = 6.0V,Ic = 1.0mA 0.72 V
DC Current Gain *hFE VCE = 6.0V, IC = 1.0 mA 40 180
Transition Frequency fT VCE = 6.0V, Ic = - 1.0mA 400 MHz
Power Gain Gpe VCE = 6.0V, IE = - 1.0mA, RG =50kΩ18 dB
f = 100MHz
Collector to Base Time Constant Cc rb'b VCE = 6.0V, IE = - 1.0mA, f=31.9MHz 15 ps
Output Capacitance Cob VCB = 6V, IE =0, f =1MHz 1.30 pF
Noise Figure NF VCE = 6.0V, IE = - 1.0mA, RG =50kΩ5.00 dB
f = 100MHz
*hFE Classifications
4
- 55 to + 150
20
VALUE
20
30
20
250
+150
MF : 40 - 80 LF : 60 - 120 KF : 90 - 180
C
B
Continental Device India Limited Data Sheet Page 1 of 3
Continental Device India Limited
An ISO/TS16949 and ISO 9001 Certified Company
CSC2786
TO-92
Plastic Package
TO-92 Plastic Package
TO-92 Transistors on Tape and Ammo Pack
TO-92 Bulk
TO-92 T&A 1K/polybag
2K/ammo box 200 gm/1K pcs
645 gm/2K pcs 3" x 7.5" x 7.5"
12.5" x 8" x 1.8" 5K
2K 17" x 15" x 13.5"
17" x 15" x 13.5" 80K
32K 23 kgs
12.5 kgs
PACKAGE
Net Weight/Qty
Details
STANDARD PACK INNER CARTON BOX
Qty
OUTER CARTON BOX
Qty Gr WtSize Size
Packing Detail
PIN CONFIGURATION
1. BASE
2. COLLECTOR
3. EMITTER
All diminsions in mm.
DIM MIN. MAX.
A4.32 5.33
B4.45 5.20
C3.18 4.19
D0.41 0.55
E0.35 0.50
F5 DEG
G1.14 1.40
H1.14 1.53
2.082
K
L12.70
1.982 —
1
2
3
E
SEC AA
D
B
A
L
Solderability Ensured Dimension With 'L'
UncontrolledBeyond 'L'
K
DAA
G
1
2
3
FF
H
C
3 2 1
Mechanical Data
T
A
A1
P(p)
C1
C2 W2
Do
F2
F
P2
Po
F1
W1
Wo
W
H1
H2
H3
L
t1
t
Ho
h1 h1
hh
ITEM
SYMBOL
SPECIFICATION
PULL - OUT FORCE (P) 6N
MIN.
NOM.
BODY WIDTH A1 4.0 4.8
BODY HEIGHT A4.8 5.2
BODY THICKNESS T3.9 4.2
AT TOP OF BODYCOMPONENT ALIGNMENT SIDE VIEW h01.0 AT TOP OF BODYCOMPONENT ALIGNMENT FRONT VIEW h1 0 1.3
COMPONENT HEIGHT H1 23.25
LENGTH OF SNIPPED LEADS L11.0
t1 0.3-0.6TOTAL TAPE THICKNESS t1.2
CLINCH HEIGHT H3 3.0
LEAD PARALLELISM | C1 - C2 | 0.22
MAX.
PITCH OF COMPONENT P12.7 ± 1.0 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCHFEED HOLE PITCH Po 12.7 ± 0.3
FEED HOLE CENTRE TO TO BE MEASURED AT BOTTOM OF CLINCH
COMPONENT CENTRE P2 6.35 ± 0.4
DISTANCE BETWEEN OUTER
LEADS F5.08 + 0.6
- 0.2
TAPE WIDTH W18 ± 0.5
HOLD-DOWN TAPE WIDTH Wo 6± 0.2
HOLE POSITION W1 9+ 0.7
- 0.5
HOLD-DOWN TAPE POSITION W2 0.5 ± 0.2
LEAD WIRE CLINCH HEIGHT Ho 16 ± 0.5
FEED HOLE DIAMETER Do 4± 0.2
LEAD - TO - LEAD DISTANCE F1, F2 2.54 + 0.4
STAND OFF H2 0.45 1.45
TOL .
REMARKS
NOTES
1. Maximum alignment deviation between leads will not to be greater than 0.2mm.
2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches.
3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive.
4. There will be no more than three (3) consecutive missing components in a tape.
5. A tape trailer, having at least three feed holes are provided after the last component in a tape.
6. Splices should not interfere with the sprocket feed holes.
- 0.1
Adhesive Tape on Top Side
Flat side
Flat Side of Transistor and
Adhesive Tape Visible
2000 pcs./Ammo Pack
Label
Carrier
Strip
186
(7.3")
332 (13")
FEED
43
(1.7")
Ammo Pack Style
All dimensions in mm
Continental Device India Limited Data Sheet Page 2 of 3
Notes
CSC2786
TO-92
Plastic Package
CSC2786Rev210302E
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best
suited
for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as
to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and
on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility
for
inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or
use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not
designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as
individual
Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems
or
applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).
CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India.
Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119
email@cdil.com www.cdilsemi.com
Continental Device India Limited Data Sheet Page 3 of 3