(10/36) TLA-6T118LF/119LF/120LF/121LF/122LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES * Product conforming to RoHS directive. * Can be mounted with lead-free solder (260C max.). * 16-pin SMD package(1.27mm=50mil pin pitch). * Excellent common mode noise suppression. * Inductance is 350H or greater (f=100kHz, DC bias=8mA). * Using the high-quality and wide-band ferrite cores for LAN. * Packaging specification is taping and bulk(TLA-6T1 LF-T: Tape and reel, TLA-6T1 LF: Bulk). GENERAL SPECIFICATIONS SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. Pulse transformer Common-mode choke Port Operating Storage Temperature ranges Withstanding voltage ... 2 2 1 0 to +70C -40 to +85C Erms:1500V[60s] ... TDK Part No. Lot No. 6.8typ. 9.20.2 0.5typ. 1.27typ. * 0.25typ. TX N.C. pins: * RX : Country of origin 0.10max. 0.45typ. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 ... 3.4 9.8 Primary signal pattern (connected No.-) keep out area 1.4 Secondary signal pattern (connected No....-) keep out area 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Part No. TLA-6T118LF(-T) TLA-6T119LF(-T) TLA-6T120LF(-T) TLA-6T121LF(-T) TLA-6T122LF(-T) Turns ratio : : 1CT:1CT 1CT:1CT 1.41CT:1CT 1CT:1CT 2CT:1CT 1CT:1CT 1CT:1.41CT 1CT:1CT 1.25CT:1CT 1CT:1CT Inductance (H)min. [DC bias 8mA, 100kHz] - - 350 350 350 350 350 350 350 350 350 350 Insertion loss (dB)max. [0.1 to 100MHz] - - 1 1 2 1 3.5 1 2.5 1 2 1 Inter-winding stray capacitance (pF)max.[100kHz] - - 25 25 25 25 25 25 25 25 25 25 * Ta=25C * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 004-01 / 20061110 / edlan_tla.fm (11/36) PACKAGING STYLES Quantity : 1000pieces/reel 2 4 10 11.5 12 5.9 24 0.3 (12.4) o1.5+0.1, -0 1.75 TAPE DIMENSIONS 0.4 Dimensions in mm o330typ. REEL DIMENSIONS 20.5 o210.8 o130.2 30.4max. RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 30s max. 260C max. 230C Natural cooling Dimensions in mm RECOMMENDED CONDITION FOR LONG TERM STORE When it stores for a long term, please avoid place of high temperature and high humidity. Recommend that it uses after the delivery within 1year. Temperature range: +5 to +30C Humidity: 60(%)RH max. 16515C 2C/s 120s max. 1 to 2C/s Time(s) * Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). * This profile is reference data we recommend. Please check in your actual process. * For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. * The cutted end of terminal has no plating(out of subject of solder ability). * All specifications are subject to change without notice. 004-01 / 20061110 / edlan_tla.fm