Bazaar Propagate Wiki Login | Sign up
Feedback & Ideas｜Help
Bazaar / Grove / Display for Grove / Grove - OLED Display 1.12"
Fusion Community
Category
Search for products, brands and platforms
ADD TO CART
Ships on 2017-07-29
Description
Best-sellers
Technical Details
Reviews
Questions and Answers
View History
Best-sellers
Technical Details
Dimensions 130mm x 80mm x 9mm
Description
Grove - OLED 1.12'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove
compatible 4pin I2C interface.Grove - OLED 1.12"is constructed with 96 x 96 dot matrix OLED module ([
LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-
emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low
power consumption.
KEY FEATURES
Dot Matrix: 96 x 96 Pixels
Color: Grayscale Display (16 Gray shades)
Supports both Normal and Inverse Color Display
Supports Continuous Horizontal Scrolling
Grove compatible 4pin I2C connector
Works with both 5V and 3.3V logic MCUs
Interface: I2C
Wide range of operating temperature: -40 °C ~ 70 °C
APPLICATION IDEAS
Graphic display adapter for Seeeduino and Arduino using Grove stem board
Display adapter for any 5V or 3.3V MCU which supports I2C interface
Can be used with mbed microcontroller
DOCUMENTS
For all Grove users (especially beginners), we provide you guidance PDF documents. Please
download and read through Preface - Getting Started and Introduction to Grove before your using
of the product.
Please visit our wiki page for more info about this product.
It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For
technical support, please post your questions to our forum.
Grove - OLED Display 1.12"
SKU 104030011
Read all 1 reviews
BACKORDER 47 Available
1
Grove - OLED Display 0.96"
Base Shield V2
Grove - Universal 4 Pin 20c…
Grove - Temperature&Hu…
USD
Weight G.W 13g
Battery Exclude
Documents
WIKI
LY120 Datasheet
Schematic in Eagle
Github Repository of the Library
SSD1327 Datasheet
Feb 14,2017 by Franck DE WIT France Was this review helpful ? 0
Reviews
Easy to use
Facile à utiliser et précisEasy to use and accuratePerfect for my project: Ambient air analyzer.Whith
Seeeduino Lotus. You can find it here, this can give you ideas : https://www.instructables.com/id/Room-Air-
Analyzer/Quality Support WikiAttention pour les Français : les prix sont pas ttc donc frais de douane.
0
Dan_Cohen on Oct 19,2016
I have just ported the supplied Arduino library over to mbed and published it here:
http://developer.mbed.org/user... . This display is a little
0
Nikolaj Zamotaev on Oct 19,2016
When trying to download schematics for this module from wiki, I get nothing. The link I am trying to use is:
http://www.seeedstudio.com/wik...
0
Carlos Figueira on Oct 19,2016
With the 1.12" OLED Display it is possible to print Float Numbers using the command SeeedOled.putFloat(),
but in this screen the only command available is .putNumber()!How do I print float type numbers in this
display?!
Questions and Answers
Have a question about this? Ask people who own it.
Reply
upvote (0)
luo G.ss on Oct 20,2016 10:42 AM
the bandwidth is _5M. We confess that the bandwidth may be a bit different for all the products, and the lowest
bandwidth we ensure is 5M.
Reply
upvote (0)
Reply
upvote (0)
luo G.ss on Oct 20,2016 10:42 AM
thanks for your suggestion. acutlly, the designer has tried to do this, but for some reason, it is not stable. we will
give his your suggestion .
Reply
upvote (0)
Reply
upvote (0)
Deray Wu on Oct 20,2016 10:42 AM
Jacket Chen on Oct 20,2016 10:48 AM
http://www.seeedstudio.com/wik...
I'm sorry the libraries of OLED don't have this function, maybe you can modify it. BTW,maybe you can use
SeeedGrayOled.putString("19.12");
Reply
upvote (0)
Reply
upvote (0)
0
Bruno Medina on Oct 19,2016
Hi!The method SeeedGrayOled.clearDisplay() do nothing on my code.I write on the screen but when i call
clearDisplay nothing happens.I'm using UNO R3.Thanks!
0
Alexey Fedchenko on Oct 19,2016
Can it show images in 16 shades of gray? Already use this one, see text in shades in sample code, but no
such code for images.
0
Harry Kim on Oct 19,2016
I'm using Seeedino Stalker v2.2 and Grove - Base shield. I connected this OLED into the first I2C slot. It was
looking OK just before pulsing my G1/2 Water Flow Sensor with digital pin 2 (interrupt 0). So I changed the
pin of G1/2 Water Flow sensor fro
0
Cristian Iordache on Oct 19,2016
When do you think you will be able to update the library so that these OLEDs would work with Arduino IDE
1.0?I wanted to use my oled with a big sketch I did in v.1.0 so it would be hell to change it to v.0.23.Waiting
impatiently for an an
0
The files are ok, can be downloaded and included, but something is wrong. I cannot run the examples on
whatnick on Oct 20,2016 10:51 AM
I can put floats using this :char tmp[10];dtostrf(Vrms,6,2,tmp);SeeedGrayOled.putString(tmp);
Reply
upvote (0)
Reply
upvote (0)
luo G.ss on Oct 20,2016 10:42 AM
Jacket Chen on Oct 20,2016 10:48 AM
you can ref the schematic of DSO quad, it is about 1M thanks..
This function should be used before starting a fresh start or after scroll deactivation,such as SeeedGrayOled.init();
Reply
upvote (0)
Reply
upvote (0)
Reply
upvote (0)
Jacket Chen on Oct 20,2016 10:47 AM
You can set level of gray via this command : SeeedGrayOled.setGrayLevel(i); // the minimum value is 0,the
maximum value is 15.
Reply
upvote (0)
Reply
upvote (0)
Yuri Qiu on Oct 20,2016 10:41 AM
Jacket Chen on Oct 20,2016 10:42 AM
Thanks your feedback, you can go to WISH to provide your idea for this DSO.
Hi,i have tested its program,and it's ok.OLED and Water Sensor can be uesd together.Please check your program
again ,and you can sent a e-mail to us if you have any question detailedly.
Reply
upvote (0)
Reply
upvote (0)
Reply
upvote (0)
Ling Zhang on Oct 20,2016 10:41 AM
Wolfgang Stelzhammer on Oct 20,2016 10:43 AM
1.yes, you will receive the tracking number from our system automatically;2.yes,but only free Registered Air Mail,
not EMS;
Well I changed the libaries to use them in the 1.0.3 version of the IDE.In the file SeeedGrayOLED.h change line 27 to
#include "Arduino.h" and in SeeedGrayOLED.cpp change in lines 186, 187, 247 and 248 change the "send"-Method
to "write"-Method. Ea
Reply
upvote (0)
Reply
upvote (0)
email address
>
POPULAR SEARCHES
PCB Manufacturing PCB Stencil Arduino XBee Arduino Shield Beaglebone Black Raspberry Pi Raspberry Pi Touchscreen Linkit Cubieboard Beaglebone Cape
FPGA LinkIt ONE Crazyflie 2.0 Raspberry Pi 3 Model B RF Explorer DSO Nano v3 MediaTek X20 HiKey Board rplidar raspberry pi relay RPLIDAR A2
Seeed Info
Reach Us
Distributors
Designers
Careers
Site Map
Customer Service
Contact Us
Customer Support
Technical Support
Terms and Conditions
Order Information
Shipping Information
Payment Information
Warranty and Return
Terms of use
Privacy Policy
Stay Tuned
Subscribe to get the latest product releases, activities
and tutorials from Seeed Studio.
View History
Jorge Topete on Oct 19,2016
my "Romeo ALL in one controller"I hope to be able to run the module. Thank you!
0
Pavel Konovalov on Oct 19,2016
Next files are corrupted, please reload it on this web site. http://www.seeedstudio.com/dep...
https://www.seeedstudio.com/Grove---OLED-Display-1.12"-p-824.html
0
Guy Gauthier on Oct 19,2016
Hi!It's for the 'Grove - OLED 96x96'. I'm not able to download the 'Seeed Gray OLED library' zip file, it's
always corrupted. Could you see that it work, please?Thanks.Guy
Reply
upvote (0)
Yuri Qiu on Oct 20,2016 10:41 AM
Dear customer, the libraries is not support Arduino 1.0 yet.So suggest you use Arduino 0023 to compile those
codes.And could be work. :)
Reply
upvote (0)
Reply
upvote (0)
Paf Paf on Oct 20,2016 10:41 AM
Steve Chang on Oct 20,2016 10:41 AM
Look at the forum. To name a few problems: trigger (major), voltage and frequency measurements, slow time
scales...
Please let us know if it still doesn't work for you.
Reply
upvote (0)
Reply
upvote (0)
Reply
upvote (0)
Paf Paf on Oct 20,2016 10:41 AM
Hello, I measured 230V with the switchable x1/x10 probes in x10 mode. I didn't notice anything wrong.
Reply
upvote (0)
SHIPPING INFORMATION KNOWLEDGE BASE HELP CENTER
315Mhz remote relay swit…
Protoshield Kit for Arduino
UartSBee V4
FT2232H USB 2.0 Hi-Speed …
