VS-SD1100C..C Series
www.vishay.com Vishay Semiconductors
Revision: 14-Jan-14 2Document Number: 93535
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS
SD1100C..C
UNITS
04 to 20 25 to 32
Maximum average forward current
at heatsink temperature IF(AV)
180° conduction, half sine wave
Double side (single side) cooled
1400 (795) 1100 (550) A
55 (85) 55 (85) °C
Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled 2500 2000
A
Maximum peak, one-cycle forward,
non-repetitive current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ
maximum
13 000 10 500
t = 8.3 ms 13 600 11 000
t = 10 ms 100 % VRRM
reapplied
10 930 8830
t = 8.3 ms 11 450 9250
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
846 551
kA2s
t = 8.3 ms 772 503
t = 10 ms 100 % VRRM
reapplied
598 390
t = 8.3 ms 546 356
Maximum I2t for fusing I2tt = 0.1 to 10 ms, no voltage reapplied 8460 5510 kA2s
Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.78 0.84 V
High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.94 0.88
Low level value of forward
slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.35 0.40
m
High level value of forward
slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 0.26 0.38
Maximum forward voltage drop VFM Ipk = 1500 A, TJ = TJ maximum
tp = 10 ms sinusoidal wave 1.31 1.44 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS
SD1100C..C
UNITS
04 to 20 25 to 32
Maximum junction operating
temperature range TJ- 40 to 180 - 40 to 150 °C
Maximum storage temperature range TStg - 55 to 200
Maximum thermal resistance,
junction to heatsink RthJ-hs
DC operation single side cooled 0.076 K/W
DC operation double side cooled 0.038
Mounting force, ± 10 % 9800 (1000) N (kg)
Approximate weight 83 g
Case style See dimensions - link at the end of datasheet B-43
RthJ-hs CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.007 0.007 0.005 0.005
TJ = TJ maximum K/W
120° 0.008 0.008 0.008 0.008
90° 0.010 0.010 0.011 0.011
60° 0.015 0.015 0.016 0.016
30° 0.026 0.026 0.026 0.026