ø16mm - L6 Series
Miniature Switches & Pilot Devices
A2-30
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Key features of the 5/8” L6 Series include:
• 5/8” (16mm) mounting holes
• Locking lever removable contact blocks
• Solder terminal or PCB terminal options
•Available assembled or as sub-components
•Worldwide approvals
• Incandescent or LED illumination
• Snap action contacts
Contact Ratings
Conforming to Standards
EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14
Operating Temperature
Operation: –25 to +55°C (without freezing), 45 to 85% rh
Storage: -30 to +80°C (without freezing)
Vibration Resistance
5 to 55Hz, 1.0 peak-peak amplitude max
Shock Resistance
Operating limit: 100 m/sec
2
(approximately 10G)
Damage limit: 1000 m/sec
2
(approximately 100G)
Mechanical Life
Momentary pushbuttons 2,000,000 operations minimum
All others: 250,000 operations minimum
Degree of Protection
IP65 (conforming to IEC 60529)
Dielectric Strength
Switch unit: between live and ground: 2500 volt AC, 1 minute
between terminals of different poles: 2500 volt AC, 1 minute
between terminals of same pole: 1000 volt AC, 1 minute
Illumination unit: between live part and ground: 2500 volt AC, 1 minute
Insulation Resistance
100 M
Ω
minimum (using 500V DC megger)
Rated Insulation Voltage
250 V AC/DC
Rated Thermal Current
Gold Contacts (pcb): 3A
Silver Contacts (solder): 5A
Contact Resistance
50
Ω
maximum initial value
Rated Operating Current
Silver Contacts
Gold Clad Contacts
(Solder Terminals) (PCB terminals)
30V 125V 250V
30V 125V
AC resistive
- 3A 2A AC inductive - 0.1A
AC inductive - 2A 1.5A DC resistive 0.1A -
DC resistive 2A 0.4A -
DC inductive 1A 0.2A -
Minimum Recommended Load
(reference value for silver contacts)
5 VAC/DC, 1mA
Terminal Style
0.110” Solder Tab /PCB
Contact Form
Snap Action, Double Throw
Contact Material
Solder Tab: Pure Silver /PCB thermal Gold Plated Silver
Electrical Life
(at full load)
Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour)
All others: 100,000 operations minimum (1200 operations / hour)
L
amp Ratings
Lamp Current Draw
5V DC LED: 8mA
6V LED: 7mA 6V incandescent: 100 mA
12V LED: 8mA 12V incandescent: 50 mA
24V LED: 8mA 24V incandescent: 25 mA
Lamp Life
Incandescent: 2000 hours./LED: 50,000 hours. (on pure DC, half-life intensity)
Buzzer Ratings
Frequency
2 khz ± 500 HZ
Amplitude
80db @ 0.1m (at rated voltage)
Operating Voltage
6V AC/DC or 12 - 24V AC/DC ± 10%
Adjustable Cycle
55 to 600 cycles per minute
Current Draw
DC: 7mA
AC: 20mA
Life
1000 hrs. minimum
Insulation Voltage
60V AC/DC
Operating Temperature
-20 to 55 C (no freezing), 45 to 85% rh
L6 Series — Miniature Switches and Pilot Devices
CSA Certified
File No. LR21451
UL Recognized
File No. E55996
Registration No. R9551089 (E-stops)
Registration No. J9551458 (all other switches)
Registration No. J9650511 (Pilot Lights)
Miniature Switches & Pilot Devices
ø16mm - L6 Series
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-31
A2
Switches & Pilot Devices
Part Numbers: Non-Illuminated Pushbuttons
Style Operation Contact Terminal Style
Solder Tab PCB
Round
Momentary SPDT
DPDT LA1B-M1C5-
➀
LA1B-M1C6-
➀
LA1B-M1C1V-
➀
LA1B-M1C2V-
➀
Maintained SPDT
DPDT LA1B-A1C5-
➀
LA1B-A1C6-
➀
LA1B-A1C1V-
➀
LA1B-A1C2V-
➀
Square
Momentary SPDT
DPDT LA2B-M1C5-
➀
LA2B-M1C6-
➀
LA2B-M1C1V-
➀
LA2B-M1C2V-
➀
Maintained SPDT
DPDT LA2B-A1C5-
➀
LA2B-A1C6-
➀
LA2B-A1C1V-
➀
LA2B-A1C2V-
➀
Rectangular
Momentary SPDT
DPDT LA3B-M1C5-
➀
LA3B-M1C6-
➀
LA3B-M1C1V-
➀
LA3B-M1C2V-
➀
Maintained SPDT
DPDT LA3B-A1C5-
➀
LA3B-A1C6-
➀
LA3B-A1C1V-
➀
LA3B-A1C2V-
➀
Oversize Round Flush
Momentary SPDT
DPDT HA1B-M1C5-
➀
HA1B-M1C6-
➀
HA1B-M1C1V-
➀
HA1B-M1C2V-
➀
Maintained SPDT
DPDT HA1B-A1C5-
➀
HA1B-A1C6-
➀
HA1B-A1C1V-
➀
HA1B-A1C2V-
➀
Oversize Round
Extended Momentary SPDT
DPDT HA1B-M2C5-
➀
HA1B-M2C6-
➀
HA1B-M2C1V-
➀
HA1B-M2C2V-
➀
Maintained SPDT
DPDT HA1B-A2C5-
➀
HA1B-A2C6-
➀
HA1B-A2C1V-
➀
HA1B-A2C2V-
➀
Oversize Square
Flush Momentary SPDT
DPDT HA2B-M1C5-
➀
HA2B-M1C6-
➀
HA2B-M1C1V-
➀
HA2B-M1C2V-
➀
Maintained SPDT
DPDT HA2B-A1C5-
➀
HA2B-A1C6-
➀
HA2B-A1C1V-
➀
HA2B-A1C2V-
➀
Oversize Square
Extended Momentary SPDT
DPDT HA2B-M2C5-
➀
HA2B-M2C6-
➀
HA2B-M2C1V-
➀
HA2B-M2C2V-
➀
Maintained SPDT
DPDT HA2B-A2C5-
➀
HA2B-A2C6-
➀
HA2B-A2C1V-
➀
HA2B-A2C2V-
➀
Mushroom
Momentary SPDT
DPDT HA1B-M3C5-
➀
HA1B-M3C6-
➀
HA1B-M3C1V-
➀
HA1B-M3C2V-
➀
Maintained SPDT
DPDT HA1B-A3C5-
➀
HA1B-A3C6-
➀
HA1B-A3C1V-
➀
HA1B-A3C2V-
➀
Non-Illuminated Pushbuttons (Assembled)
Button Color Codes
Color Code
Black B
Green G
Red R
Blue S
White W
Yellow Y
1. In place of ➀ specify Button Color Code from table on right.
2. Illuminated (translucent) style lenses also available, specify as such: instead of
LA1B-M1C5-➀ use LA1B-M1C5L-➁ in place of ➁ specify Lens Color Code from
next page.)
3. PCB terminal models also available with silver contacts (change “1” or “2” to
“5” or “6” respectively, ie LA1B-M1C1V-➀ becomes LA1B-M1C5V-➀.
ø16mm - L6 Series
Miniature Switches & Pilot Devices
A2-32
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Contact + Safety Lever Lock + Operator + Button = Complete Part
Part Numbers: Operators Part Numbers: Buttons/Lenses
Style Momentary Maintained Style Button Lens
Round
LA1L-MO LA1L-AO
Round
AB6M-BK2-
①
AL6M-LK2-
➁
Square
LA2L-MO LA2L-AO
Square
AB6Q-BK2-
①
AL6Q-LK2-
➁
Rectangular
LA3L-MO LA3L-AO
Rectangular
AB6H-BK2-
①
AL6H-LK2-
➁
Oversize Round
HA1B-MO HA1B-AO
Oversize Round Flush
HA1A-B1-
①
HA1A-L1-
➁
*
Oversize Square
HA2B-MO HA2B-AO
Oversize Round Extended
HA1A-B2-
①
–
Mushroom
HA1B-MOL HA1B-A0L
Oversize Square Flush
HA2A-B1-
①
HA2A-L1-
➁
**
Oversize Square
Extended
HA2A-B2-
①
–
Mushroom
HA1A-B3-
①
HA1A-L3-
➁
Non-Illuminated Pushbuttons (Sub-Assembled)
① Button Color Code
➁ Lens Color Code
Part Numbers: Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT HA-C1
HA-C2 HA-C1V
HA-C2V
Silver
SPDT
DPDT HA-C5
HA-C6 HA-C5V
HA-C6V
Part Number: Safety Lever Lock
Appearance Part Number
HA9Z-LS
Color Code
Black B
Green G
Red R
Blue S
White W
Yellow Y
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
1. In place of ① specify Button Color
Code from table on right.
2. In place of ➁ specify Lens Color Code
from table on right.
3. *requires HA1L-M0 or HA1L-A0 oper-
ator instead of HA1B-M0 or HA1B-A0.
4. **requires HA2L-M0 or HA2L-A0
instead of HA2B-M0 or HA2B-A0.
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-33
A2
Switches & Pilot Devices
Miniature Switches and Pilot Devices: 5/8"(16mm)
Key features of HA1B/HA1E Push lock Turn Reset include:
• PCB or Solder Terminals
• Quick Release Contact Blocks
• Positive Action Contacts
•1 or 2 form B (SPST-NC) Contacts
• IP65 Protection
• 16mm Mounting Hole
•Tamper Proof Construction
Specifications
Contact Ratings 24VDC/2A
120VAC/3A
Contact Form 1 or 2 form B (2-SPST-NC)
Termination PCB or Solder Terminal
Contact Material Silver
Applicable Standards EN60947-5-1, UL-508, CSA 22.2. No. 14
Rated Insulation Voltage 250V
Degree of Protection IP65, when mounted in an enclosure
Conditional Short-Circuit Current
&Short-Circuit Protective Device 50 A (at 250V) 10A 250V Fuse, operation class
aM according to IEC269-1 and IEC269-2
Positive
Opening
Operation
Positive opening travel 3.4mm
Minimum force required to achieve
positive opening operation of all
break contacts. 10.3 N (2 form B contacts)
Maximum travel including travel
beyond the minimum travel position 5.5mm
Maximum frequency of actuation 1,200 operations/hour
Pollution Degree 3
Part Numbers: Positive Action E-Stop
Appearance Operation Contact Terminal Style
Solder Tab PCB
E-Stop Pushlock/
Turn Reset
DPST(NC)
(2 form B) HA1B-V2E2R HA1B-V2E2VR
Short
Body SPST-NC (1 form B)
DPST-NC (2 form B) HA1E-V2S1R
HA1E-V2S2R –
Part Number: Buzzers (IP40)
Appearance Operating Voltage Terminal Style
Solder/Tab PCB
Buzzer-Rectangular
6V AC/DC ± 10% LA3Z-1X2 LA3Z-1X2V
12V to 24 AC/DC ± 10% LA3Z-1X4 LA3Z-1X4V
HA1B/HA1E E-Stop
CSA approved
File No. LR21451
File No. DK95-00138 UL Recognized
File No. E55996
Direct
Opening
Action
Part Numbers: Nameplates
HAAV–Yellow Plastic
Part Number
Blank HAAV-0
Engraved
Emergency Stop HAAV-27
Ø 60mm
S
T
O
P
E
M
E
R
G
E
N
C
Y
Button is non-
removable, avail-
able in red and as
complete assembled
unit only.
Frequency: 2khz ± 500 hz
Amplitude: 80db at 0.1m
Beeping: Adjustable from steady
tone to 600 beeps per minute.
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-34 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Pilot Lights (LED)
Style Voltage Terminal Style
Solder Tab PCB
Round
24V AC/DC LED
24VAC/DC Incandescent LA1P-1C04-➁
LA1P-1C07-➁LA1P-1C04V-➁
LA1P-1C07V-➁
Square
24V AC/DC LED
24V AC/DC Incandescent LA2P-1C04-➁
LA2P-1C07- ➁LA2P-1C04V-➁
LAZP-1C07V-➁
Rectangle
24V AC/DC LED
24V AC/DC Incandescent LA3P-1C04-➁
LA3P-1C07-➁ LA3P-1C04V-➁
LA3P-1C07V-➁
Oversize Round
24V AC/DC LED
24V AC/DC Incandescent HA1P-1C04-➁
HA1P-1C07-➁HA1P-1C04V-➁
HA1P-1C07V-➁
Oversize Square
24V AC/DC LED
24V AC/DC Incandescent HA2P-1C04-➁
HA2P-1C07-➁HA2P-1C04V-➁
HA2P-1C07V-➁
Oversize Round Unibody
24V AC/DC LED
24V AC/DC Incandescent HA1P-14-➁
HA1P-17-➁–
Oversize Square Unibody
24V AC/DC LED
24V AC/DC Incandescent HA2P-14-➁
HA2P-17-➁–
➁
Lens/LED Color Codes
Voltage/Lamp Code
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120 V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
Pilot Lights (Assembled)
1. In place of
➁
specify Lens/LED Color Code from table.
2. Lamps also available in 5VDC, 6V AC/DC, 12V AC/DC or 120V AC, change “4” or
“7” using Voltage/Lamp Codes (ie LA1P-1C03-➁ uses 12V AC/DC LED).
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-35
A2
Switches & Pilot Devices
Part Numbers: Operators Part Numbers: Lenses
Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit
Style Part Number Style Part Number
Round
LA1P-0
Round
AL6M-LK3-➁
Square
LA2P-0
Square
AL6Q-LK3-➁
Rectangular
LA3P-0
Rectangular
AL6H-LK3-➁
Oversize Round
HA1P-0
Oversize Round
HA1A-P1-➁
Oversize Square
HA2P-0
Oversize Square
HA2A-P1-➁
Oversize Round Unibody
HA1P-00
S
t
y
l
e
Part Number
Oversize Square Unibody
HA2P-00
Pilot Lights (Sub-Assembled)
Part Numbers: Lamps
Part Numbers: Terminals
Part Number: Lamp Holder
Part Number: Safety Lever Lock
➁ Lens/LED Color Codes
Style Voltage Part
Number
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120 V AC
LFTD-5➁
LFTD-6➁
LFTD-1➁
LFTD-2➁
LFTD-H2➁
Incandescent
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Appearance Solder
Tab PCB
HA-C00 HA-C00V
Appearance Part Number
HA9Z-AH
Appearance Part Number
HA9Z- LS
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
In place of
➁
specify LED color
code from table below.
Not required for unibody
models.
In place of ➁ specify lens color
code.
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-36 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Illuminated Pushbuttons
Style Operation Lamp Voltage Contact Terminal Style
Solder Tab PCB
Round
Momentary
24V AC/DC LED SPDT
DPDT LA1L-M1C54-➁
LA1L-M1C64-➁LA1L-M1C14V-➁
LA1L-M1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA1L-M1C57-➁
LA1L-M1C67-➁LA1L-M1C17V-➁
LA1L-M1C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT LA1L-A1C54-➁
LA1L-A1C64-➁LA1L-A1C14V-➁
LA1L-A1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA1L-A1C57-➁
LA1L-A1C67-➁LA1L-A1C17V-➁
LA1L-A1C27V-➁
Square Momentary
24V AC/DC LED SPDT
DPDT LA2L-M1C54-➁
LA2L-M1C64-➁LA2L-M1C14V-➁
LA2L-M1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA2L-M1C57-➁
LA2L-M1C67-➁LA2L-M1C17V-➁
LA2L-M1C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT LA2L-A1C54-➁
LA2L-A1C64-➁LA2L-A1C14V-➁
LA2L-A1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA2L-A1C57-➁
LA2L-A1C67-➁LA2L-A1C17V-➁
LA2L-A1C27V-➁
Rectangular
Momentary
24V AC/DC LED SPDT
DPDT LA3L-M1C54-➁
LA3L-M1C64-➁LA3L-M1C14V-➁
LA3L-M1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA3L-M1C57-➁
LA3L-M1C67-➁LA3L-M1C17V-➁
LA3L-M1C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT LA3L-A1C54-➁
LA3L-A1C64-➁LA3L-A1C14V-➁
LA3L-A1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT LA3L-A1C57-➁
LA3L-A1C67-➁LA3L-A1C17V-➁
LA3L-A1C27V-➁
Oversize Round
Momentary
24V AC/DC LED SPDT
DPDT HA1L-M1C54-➁
HA1L-M1C64-➁HA1L-M1C14V-➁
HA1L-M1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA1L-M1C57-➁
HA1L-M1C67-➁HA1L-M1C17V-➁
HA1L-M1C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT HA1L-A1C54-➁
HA1L-A1C64-➁HA1L-A1C14V-➁
HA1L-A1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA1L-A1C57-➁
HA1L-A1C67-➁HA1L-A1C17V-➁
HA1L-A1C27V-➁
Oversize Square
Momentary
24V AC/DC LED SPDT
DPDT HA2L-M1C54-➁
HA2L-M1C64-➁HA2L-M1C14V-➁
HA2L-M1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA2L-M1C57-➁
HA2L-M1C67-➁HA2L-M1C17V-➁
HA2L-M1C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT HA2L-A1C54-➁
HA2L-A1C64-➁HA2L-A1C14V-➁
HA2L-A1C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA2L-A1C57-➁
HA2L-A1C67-➁HA2L-A1C17V-➁
HA2L-A1C27V-➁
Mushroom
Momentary
24V AC/DC LED SPDT
DPDT HA1L-M3C54-➁
HA1L-M3C64-➁HA1L-M3C14V-➁
HA1L-M3C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA1L-M3C57-➁
HA1L-M3C67-➁HA1L-M3C17V-➁
HA1L-M3C27V-➁
Maintained
24V AC/DC LED SPDT
DPDT HA1L-A3C54-➁
HA1L-A3C64-➁HA1L-A3C14V-➁
HA1L-A3C24V-➁
24V AC/DC
Incandescent SPDT
DPDT HA1L-A3C57-➁
HA1L-A3C67-➁HA1L-A3C17V-➁
HA1L-A3C27V-➁
➁
Lens Color Codes
Voltage/Lamp Code
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
Illuminated Pushbuttons (Assembled)
1. In place of
➁
specify lens color code from table at right.
2. Lamps also available in 5V DC, 6V AC/DC, 12 V AC/DC or 120V AC, change “4”
or “7” using voltage/lamp codes (ie LA1P-1C03-➁ uses 12V AC/DC LED).
3. PCB terminal models also available with silver contacts (change “1” or “2” to
“5” or “6” respectively, ie LA1L-M1C14V-➀ becomes LA1L-M1C54V-➀.
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-37
A2
Switches & Pilot Devices
Part Numbers: Operators Part Numbers: Lenses
Contacts + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit
Style Momentary Maintained Style Part Number
Round
LA1L-MO LA1L-AO
Round
AL6M-LK2-➁
Square
LA2L-MO LA2L-AO
Square
AL6Q-LK2-➁
Rectangular
LA3L-MO LA3L-AO
Rectangular
AL6H-LK2-➁
Oversize Round
HA1L-MO HA1L-A0
Oversize
Round
HA1A-L1-➁
Oversize Square
HA2L-MO HA2L-AO
Oversize
Square
HA2A-L1-➁
Mushroom
HA1B-MOL HA1B-AOL
Mushroom
HA1A-L3-➁
Illuminated Pushbuttons (Sub-Assembled)
Part Numbers: Lamps
Part Number:Lamp Holder
Part Number: Safety Lever Lock
➁ Lens/LED Color Codes
Appearance Voltage Part Number
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5➁
LFTD-6➁
LFTD-1➁
LFTD-2➁
LFTD-H2➁
Incandescent 6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Part Numbers: Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT HA-C10
HA-C20 HA-C10V
HA-C20V
Silver
SPDT
DPDT HA-C50
HA-C60 HA-C50V
HA-C60V
Appearance Part Number
HA9Z-AH
Appearance Part Number
HA9Z-LS
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
In place of
➁
specify LED color code
from table below.
In place of
➁
specify
Lens Color Code from
table.
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-38 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Selector Switches
Style Position Contact Terminal Style
Solder Tab PCB
Round
90˚ 2 -Position
DPDT LA1S-2C6 LA1S-2C2V
Maintained
Spring return from right DPDT LA1S-21C6 LA1S-21C2V
45˚ 3-Position
Maintained DPDT LA1S-3C6 LA1S-3C2V
Spring return from right DPDT LA1S-31C6 LA1S-31C2V
Spring return from left DPDT LA1S-32C2VLA1S-32C6
2-Way spring return DPDT LA1S-33C6 LA1S-33C2V
Square
90˚ 2-Position
Maintained DPDT LA2S-2C6 LA2S-2C2V
Spring return from right DPDT LA2S-21C6 LA2S-21C2V
45˚ 3-Position
Maintained DPDT LA2S-3C6 LA2S-3C2V
Spring return from right DPDT LA2S-31C6 LA2S-31C2V
Spring return from left DPDT LA2S-32C6 LA2S-32C2V
2-Way spring Return DPDT LA2S-33C6 LA2S-33C2V
Rectangular
90˚ 2-Position
Maintained DPDT LA3S-2C6 LA3S-2C2V
Spring return from right DPDT LA3S-21C6 LA3S-21C2V
45˚ 3-Position
Maintained DPDT LA3S-3C6 LA3S-3C2V
Spring return from right DPDT LA3S-31C6 LA3S-31C2V
Spring return from left DPDT LA3S-32C6 LA3S-32C2V
2-Way spring Return DPDT LA3S-33C6 LA3S-33C2V
Oversize Round
90˚ 2-Position
Maintained DPDT HA1S-2C6 HA1S-2C2V
Spring return from right DPDT HA1S-21C6 HA1S-21C2V
45˚ 3-Position
Maintained DPDT HA1S-3C6 HA1S-3C2V
Spring return from right DPDT HA1S-31C6 HA1S-31C2V
Spring return from left DPDT HA1S-32C6 HA1S-32C2V
2-Way spring Return DPDT HA1S-33C6 HA1S-33C2V
Contact Operations
(for all selectors)
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Right
3-pos.
(DPDT)
Left
Center
Right
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
NO NC
Right
NO NC
Left
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
As viewed from front of
switch.
1. All assembled selector switches use
DPDT contacts.
2. For SPDT contacts see sub-compo-
nents on next page.
3. PCB terminal models also available
with silver contacts (change “1” or
“2” to “5” or “6” respectively, ie
LA1S-21C2V becomes LA1S-21C6V.
Selector Switches (Assembled)
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-39
A2
Switches & Pilot Devices
Part Numbers: Operators
Contacts + Safety Lever Lock + Operator = Complete Part
Style Position Function Part Number
Round 2 Maintained
Spring from right LA1S-2Y
LA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA1S-3Y
LA1S-31Y
LA1S-32Y
LA1S-33Y
Square 2 Maintained
Spring from right
LA2S-2Y
LA2S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA2S-3Y
LA2S-31Y
LA2S-32Y
LA2S-33Y
Rectangular 2 Maintained
Spring from right LA3S-2Y
LA3S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA3S-3Y
LA3S-31Y
LA3S-32Y
LA3S-33Y
Oversize Round 2 Maintained
Spring from right HA1S-2Y
HA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
HA1S-3Y
HA1S-31Y
HA1S-32Y
HA1S-33Y
Part Numbers: Contacts
Appearance Contacts Terminal Style
Solder Tab PCB
Gold
SPDT
DPDT HA-C1
HA-C2 HA-C1V
HA-C2V
Silver
SPDT
DPDT HA-C5
HA-C6 HA-C5V
HA-C6V
Part Number: Safety Lever Lock
Appearance Part Number
HA9Z-LS
Selector Switches (Sub-Assembled)
1. All assembled switches listed on previous page use DPDT contacts.
2. SPDT Contacts for use on 2 position selector switch only
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-40 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Key Switches
Style Operation Contacts Terminal Type
Solder Tab PCB
Round
90 2-Position
Maintained DPDT LA1K-2C6➂LA1K-2C2V➂
Spring
return from
right DPDT LA1K-21C6B LA1K-21C2VB
Maintained DPDT LA1K-3C6➂LA1K-3C2V➂
45 ˚3-Position
Spring
return from
right DPDT LA1K-31C6➂LA1K-31C2V➂
Spring
return from
left LA1K-32C6➂LA1K-32C2V➂
DPDT
2-Way
spring
return DPDT LA1K-33C6D LA1K-33C2VD
Square
90˚ 2-Position
Maintained DPDT LA2K-2C6➂LA2K-2C2V➂
Spring
return from
right DPDT LA2K-21C6B LA2K-21C2VB
Maintained DPDT LA2K-3C6➂LA2K-3C2V➂
45 ˚3-Position
Spring
return from
right DPDT LA2K-31C6➂LA2K-31C2V➂
Spring
return from
left DPDT LA2K-32C6➂LA2K-32C2V➂
2-Way
spring
return DPDT LA2K-33C6D LA2K-33C2VD
Rectangular
90 ˚2-Position
Maintained DPDT LA3K-2C6➂LA3K-2C2V➂
Spring
return from
right DPDT LA3K-21C6B LA3K-21C2VB
Maintained DPDT LA3K-3C6➂LA3K-3C2V➂
45 ˚3-Position
Spring
return from
right DPDT LA3K-31C6➂LA3K-31C2V➂
Spring
return from
left DPDT LA3K-32C6➂LA3K-32C2V➂
2-Way
spring
return DPDT LA3K-33C6D LA3K-33C2VD
Oversize Round
90 ˚2-Position
Maintained DPDT HA1K-2C6➂HA1K-2C2V➂
Spring
return from
right DPDT HA1K-21C6B HA1K-21C2VB
Maintained DPDT HA1K-3C6➂HA1K-3C2V➂
45 ˚3-Position
Spring
return from
right DPDT HA1K-31C6➂HA1K-31C2V➂
Spring
return from
left DPDT HA1K-32C6➂HA1K-32C2V➂
2-Way
spring
return DPDT HA1K-33C6D HA1K-33C2VD
Key Switches (Assembled)
Contact Operations
(for all selectors)
➂ Key Retention Option Codes
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Right
3-pos.
(DPDT)
Left
Center
Right
Code Description
AKey not retained in any position
(removable in all positions)
B Key retained in right position only
C Key retained in left position only
DKey retained in left and right
(3 position only)
EKey retained in center only
(3 position only)
GKey retained right and center
(3 position only)
HKey retained left and center
(3 position only)
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
NO NC
Right
NO NC
Left
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
As viewed from front of
switch.
Key cannot be removed from
a spring-return position.
1. In place of ➂ specify Ke y Retention
Code from next page.
2. All assembled key switches have
DPDT contacts. For SPDT see sub-
assembled on next page.
3. PCB terminal models also avail-
able with silver contacts (change
“1” or “2” to “5” or “6” respec-
tively, ie LA1K-2C2V➂ becomes
LA1K-2C6V➂.
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-41
A2
Switches & Pilot Devices
Part Numbers: Operators
➂ Key Retention Option Codes
Key Switches (Sub-Assembled)
Contacts + Safety lever lock + Operator = Complete Part
Style Positions Operation Part Number
Round 2Maintained
Spring from right LA1K-2➂
LA1K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA1K-3➂
LA1K-31➂
LA1K-32➂
LA1K-33D
Square 2Maintained
Spring from right
LA2K-2➂
LA2K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA2K-3➂
LA2K-31➂
LA2K-32➂
LA2K-33D
Rectangular 2Maintained
Spring from right LA3K-2➂
LA3K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA3K-3➂
LA3K-31➂
LA3K-32➂
LA3K-33D
Oversize Round 2Maintained
Spring from right HA1K-2➂
HA1K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
HA1K-3➂
HA1K-31➂
HA1K-32➂
HA1K-33D
1. In place of ➂
specify ke y r emovable code fr om table
on right.
2. Operator includes two keys.
Part Numbers: Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT HA-C1
HA-C2 HA-C1V
HA-C2V
Silver
SPDT
DPDT HA-C5
HA-C6 HA-C5V
HA-C6V
Part Number: Safety Lever Lock
Appearance Part Number
HA9Z-LS
Code Description
AKey not retained in any position
(removable in all positions)
B Key retained in right position only
C Key retained in left position only
D Key retained in left and right (3 position only)
E Key retained in center only (3 position only)
G Key retained right and center (3 position only)
H Key retained left and center (3 position only)
1. All assembled selectors listed on previous
page use DPDT contacts.
2. SPDT contacts are for use on 2 position key
switches only.
Key cannot be removed from
a spring-return position.
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-42 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Illuminated Selectors Switches
Style Operation Contact Voltage Terminal Style
Solder Tab PCB
Round
90˚ 2-Position
Maintained DPDT 24V LED
24V Incand. LA1F-2C64-➁
LA1F-2C67-➁LA1F-2C24V-➁
LA1F-2C27V- ➁
Spring
return from
right DPDT 24V LED
24V Incand. LA1F-21C64-➁
LA1F-21C67-➁ LA1F-21C24V-➁
LA1F-21C27V-➁
Maintained DPDT 24V LED
24V Incand. LA1F-3C64-➁
LA1F-3C67-➁ LA1F-3C24V-➁
LA1F-3C27V-➁
45˚ 3-Position
Spring
return from
right DPDT 24V LED
24V Incand. LA1F-31C64-➁
LA1F-31C67-➁ LA1F-31C24V-➁
LA1F-31C27V-➁
Spring
return from
left DPDT 24V LED
24V Incand. LA1F-32C64-➁
LA1F-32C67-➁ LA1F-32C24V-➁
LA1F-32C27V-➁
2-Way
spring
return DPDT 24V LED
24V Incand. LA1F-33C64-➁
LA1F-33C67-➁ LA1F-33C24V-➁
LA1F-33C27V-➁
Square
90˚ 2-Position
Maintained DPDT 24V LED
24V Incand. LA2F-2C64-➁
LA2F-2C67-➁ LA2F-2C24V-➁
LA2F-2C27V-➁
Spring
return from
right DPDT 24V LED
24V Incand. LA2F-21C64-➁
LA2F-21C67-➁ LA2F-21C24V-➁
LA2F-21C27V-➁
Maintained DPDT 24V LED
24V Incand. LA2F-3C64-➁
LA2F-3C67-➁ LA2F-3C24V-➁
LA2F-3C27V-➁
45˚ 3-Position
Spring
return from
right DPDT 24V LED
24V Incand. LA2F-31C64-➁
LA2F-31C67-➁ LA2F-31C24V-➁
LA2F-31C27V-➁
Spring
return from
left DPDT 24V LED
24V Incand. LA2F-32C64-➁
LA2F-32C67-➁ LA2F-32C24V-➁
LA2F-32C27V-➁
2-Way
spring
return DPDT 24V LED
24V Incand. LA2F-33C64-➁
LA2F-33C67-➁LA2F-33C24V-➁
LA2F-33C27V-➁
Rectangular
90˚ 2-Position
Maintained DPDT 24V LED
24V Incand. LA3F-2C64-➁
LA3F-2C67-➁ LA3F-2C24V-➁
LA3F-2C27V-➁
Spring
return from
right DPDT 24V LED
24V Incand. LA3F-21C64-➁
LA3F-21C67-➁ LA3F-21C24V-➁
LA3F-21C27V-➁
Maintained DPDT 24V LED
24V Incand. LA3F-3C64-➁
LA3F-3C67-➁ LA3F-3C24V-➁
LA3F-3C27V-➁
45˚ 3-Position
Spring
return from
right DPDT 24V LED
24V Incand. LA3F-31C64-➁
LA3F-31C67-➁ LA3F-31C24V-➁
LA3F-31C27V-➁
Spring
return from
left DPDT 24V LED
24V Incand. LA3F-32C64-➁
LA3F-32C67-➁ LA3F-32C24V-➁
LA3F-32C27V-➁
2-Way
spring
return DPDT 24V LED
24V Incand. LA3F-33C64-➁
LA3F-33C67-➁ LA3F-33C24V-➁
LA3F-33C27V-➁
Oversize Round
90˚ 2-Position
Maintained DPDT 24V LED
24V Incand. HA1F-2C64-➁
HA1F-2C67-➁ HA1F-2C24V-➁
HA1F-2C27V-➁
Spring
return from
right DPDT 24V LED
24V Incand. HA1F-21C64-➁
HA1F-21C67-➁ HA1F-21C24V-➁
HA1F-21C27V-➁
Maintained DPDT 24V LED
24V Incand. HA1F-3C64-➁
HA1F-3C67-➁ HA1F-3C24V-➁
HA1F-3C27V-➁
45˚ 3-Position
Spring
return from
right DPDT 24V LED
24V Incand. HA1F-31C64-➁
HA1F-31C67-➁ HA1F-31C24V-➁
HA1F-31C27V-➁
Spring
return from
left DPDT 24V LED
24V Incand. HA1F-32C64-➁
HA1F-32C67-➁ HA1F-32C24V-➁
HA1F-32C27V-➁
2-Way
spring
return DPDT 24V LED
24V Incand. HA1F-33C64-➁
HA1F-33C67-➁ HA1F-33C24V-➁
HA1F-33C27V-➁
Illuminated Selector Switches
Contact Operations
(for all selectors)
➁ Lens/LED Color Code
Voltage/Lamp Code
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Right
3-pos.
(DPDT)
Left
Center
Right
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
NO NC
Right
NO NC
Left
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
As viewed from front of
switch.
1. In place of ➁ specify Lens/LED Color
Code from table above.
2. Lamps also available in 5V DC, 6V
AC/DC or 12 V AC/DC, change “4”
or “7” using voltage/lamp codes (ie
LA1F-2C63-➁ uses 12V AC/DC
LED).
3. All switches listed have DPDT con-
tacts. For SPDT see sub-assembled
on next page.
4. PCB terminal models also avail-
able with silver contacts (change
“1” or “2” to “5” or “6” r espec-
tively, ie LA1F-2C24V-➁
becomes LA1F-2C64V-➁.
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
LR
LR
LCR
LCR
LCR
LCR
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-43
A2
Switches & Pilot Devices
Part Numbers: Operators
➁ LED/Lens Color Code
Part Number: Safety Lever Lock
Part Numbers: Lamps
Illuminated Selector Switches (Sub-Assembled)
Contacts + Safety lever lock + Lamp Holder + Lamp + Operator + Lens/Handle = Completed Unit
Style Positions Function Part Number
Round 2Maintained
Spring from right LA1F-20
LA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA1F-30
LA1F-310
LA1F-320
LA1F-330
Square 2Maintained
Spring from right
LA2F-20
LA2F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA2F-30
LA2F-310
LA2F-320
LA2F-330
Rectangular 2Maintained
Spring from right LA3F-20
LA3F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA3F-30
LA3F-310
LA3F-320
LA3F-330
Oversize Round 2Maintained
Spring from right HA1F-20
HA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
HA1F-30
HA1F-310
HA1F-320
HA1F-330
Part Numbers: Contacts
Appearance
Terminal Style
Contacts Solder
Tab PCB
Gold
SPDT
DPDT HA-C1
HA-C2 HA-C10V
HA-C20V
Silver
SPDT
DPDT HA-C50
HA-C60 HA-C50V
HA-C60V
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
1. All assembled selectors on previous pages use DPDT con-
tacts. SPDT contacts are for use only on two position
selectors.
Part Numbers: Lenses/Handles
Appearance Part Number
Standard
LA1A-F-➁
Oversize
HA1A-F-➁
Appearance Part Number
HA9Z-LS
Part Number: Lamp Holder
Appearance Part Number
HA9Z-AH
Appearance Voltage Part Numbers
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5➁
LFTD-6➁
LFTD-1➁
LFTD-2➁
LFTD-H2➁
Incandescent
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
In place of ➁ specify Lens Color Code
from table.
In place of ➁ specify LED Color Code
from table.
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-44 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Part Numbers: Pushbutton Selectors
Contact Operation
Part Numbers: Lever Switches
Contact Operation
Style Terminal Style
Solder Tab PCB
2 Position HA1R-2C6-①HA1R-2C2V-①
3 Position HA1R-3C6-①HA1R-3C2V-①
Style Operator Position
Left Center Right
2 Position
Normal Depressed Normal Depressed Normal Depressed
––
3 Position Blocked
Style Operation Contacts Terminal Type
Solder Tab PCB
2-Position
Maintained DPDT LA1T-2C6 LA1T-2C2V
Spring return from top DPDT LA1T-21C6 LA1T-21C2V
Spring Return from bottom DPDT LA1T-22C6 LAIT-22C2V
Maintained DPDT LA1T-3C6 LA1T-3C2V
3-Position
Spring return from top DPDT LA1T-31C6 LA1T-31C2V
Spring return from bottom LA1T-32C6 LA1T-32C2VDPDT
Spring return from both DPDT LA1T-33C6 LA1T-33C2V
Contacts Operator Position & Contact Operation
Down Center Up
2-pos.
(DPDT) Maintained
Spring from Top
2-pos
(DPDT). Spring Return
from Bottom
3-pos.
(DPDT) All models
① Button Color Code
Color Code
Black B
Green G
Red R
Blue S
Yellow Y
Pushbutton Selectors (Assembled)
1. In place of ① specify Button Color Code.
2. PCB terminal models also available with silver contacts (change “1” or “2” to
“5” or “6” respectively, ie HA1R-2C2V-① becomes HA1R-2C6V-①).
Lever Switch (Assembled)
NO NCNO NC
Left Right
NO NC
Left
NO NC
Right
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
NO NCNO NC
Left Right
NO NC
Left
NO NC
Right
NO NCNO NC
Left Right
NO NCNO NC
Left Right
NO NC
NO NC
Left Right
U
D
PCB terminal models also available
with silver contacts (change “1” or
“2” to “5” or “6” respectively, ie
LA1T-2C2V becomes LA1T-2C6V).
U
D
U
D
U
C
DU
C
D
U
C
D
U
C
D
NO NCNO NC
Left Right
NO NC
Left
NO NC
Right
As viewed from front of
switch.
NO NC
Left
NO NC
Right
NO NCNO NC
Left Right
NO NC
Right
NO NC
Left
NO NC
ONC
Left Right
NO NC
NO NC
Left Right
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-45
A2
Switches & Pilot Devices
Part Specifications Part Number Notes
Ring Wrench Made of metal MT-001
Used for tightening the plastic locking ring when
installing the L6 series unit on a panel.
Tightening torque should not exceed 9kgf cm when
tightening a locking ring.
Lamp Holder Tool
(Made of Rubber)
Made of rubber. Used for removing and
replacing LED and incandescent lamps in
illuminated units. OR-44 Rubber tool used for replacing LED and
incandescent lamps.
Lens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button
from the housing.
LED Lamp
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5➁
LFTD-6➁
LFTD-1➁
LFTD-2➁
LFTD-H2➁
T 1-3/4 miniature flange base. In place of ➁ specify LED
Color Code (see page A2-43).
Incandescent Lamp
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28 0.5W, T 1-3/4 miniature flange base
Switch Guard
90 degrees open-
ing maintained
Round/Square AL-K6 Prevents inadvertent switch operation. IP40 dust-tight
rated.
Rectangular AL-KH6
180 degrees
opening, spring
return
Round/Square AL-K6SP Prevents inadvertent switch operation. IP65 oiltight
rated.
Rectangular AL-KH6SP
Oversize Round/Sq HA9Z-K1
Dust-proof Cover
For round units AL-D6
Provides extra level of sealing for “front-panel” portion
of switches. (Not applicable for units with oversize
lenses or buttons).
For square units AL-DQ6
For rectangular units AL-DH6
Terminal Cover Made of white
nylon
All removable
contacts H6-VL2
Covers terminals to prevent possible electric shock.
Unibody Pilot Lights H6-PVL
Mounting Hole Plug
Rubber AL-B6 Fills unused panel cutouts. Made of nitrile rubber.
Push-in installation from front of panel. IP65 (oiltight)
rated.
Aluminum AL-BM6 Fills unused panel cutouts. Made of aluminum. Screw-
on locking ring from inside of panel. IP65 (oiltight) rated.
Replacement Keys
for LA1K (#132) AS6-SK
Pair of keys.
for HA1K (#231) KG9Z-SK
Replacement
Engraving Inserts
Round
Square
Rectangle
Oversize Round
Oversize Square
Mushroom
AL6M-W
AL6Q-W
AL6H-W
HA9Z-P1-W
HA9Z-P2-W
HA9Z-P13-W
Replacement
Locking Ring All models HA9Z-LN
Replacement
Anti-Rotation Ring
L6 standard AL6-LP Prevents rotation of switches in panel.
(included with all assembled switches)
L6 oversize HA9Z-LP
Replacement
Selector Inserts HA9Z-HC1-①Applicable to round oversize selectors only
① = (G, R, S, W, Y)
Replacement
Safety Lever Lock HA9Z-LS
Accessories
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-46 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Non -Illuminated Pushbuttons (LA*B)
Emergency Stop Switch (HA1B)
Emergency Stop Switch (HA1E) - Short Body Style
Buzzer (LA3Z)
Pilot Lights (LA*P)
Dimensions
0.71
(18.0)
0.27
(6.8) 0.35
(9.0) 1.39
(35.4) 0.38
(9.6) 0.71
(18.0) 0.71
(18.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.24
(6.0)
0.11
(2.8)
Ø 0.98"
(24.9mm)
Panel Thic kness
0.02"-0.24" (0.5~6.0mm)
0.43"
(11mm)
0.98" (25mm)
1.42" (36mm)
0.53"
(13.5mm)
0.41"
(10.5mm)
0.20"
(5.2mm)
0.21"
(5.4mm)
0.34"
(8.7mm)
PCB Terminal
Rubber W asher
Stopper
Locking Ring
ø0.83"
(21mm)
ø0.70"
(17.8mm)
RO.61"
(15.5mm)
NC
0.62"
(15.8mm)
LOCK
+
-
NC
0.24
(6.0)
0.62
(15.7)
0.35
(9.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.11
(2.8)
0.35
(9.0) 1.39
(35.4)
0.71
(18.0)
0.27
(6.8) 0.35
(9.0) 1.39
(35.4) 0.38
(9.6) 0.71
(18.0)
0.71
(18.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.11
(2.8)0.24
(6.0)
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-47
A2
Switches & Pilot Devices
Illuminated Pushbuttons (LA*L)
Key Switches (LA*K)
Selector Switches (LA*S)
Panel Cut-Out PCB Layout (except for Buzzer and E-Stop) PCB Pins
HA1B E-Stop
Dimensions con’t
0.71
(18.0)
0.27
(6.8) 0.35
(9.0) 1.39
(35.4) 0.38
(9.6) 0.71
(18.0) 0.71
(18.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.24
(6.0)
0.11
(2.8)
.98
(24.9)
0.71
(18.0)
0.27
(6.8) 0.35
(9.0) 1.39
(35.4) 0.71
(18.0) 0.71
(18.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.11
(2.8)0.24
(6.0)
0.66
(16.8)
0.71
(18.0)
0.27
(6.8) 0.35
(9.0) 1.39
(35.4) 0.71
(18.0) 0.71
(18.0) 0.94
(24.0)
0.71
(18.0)
0.98
(24.8)
0.11
(2.8)0.24
(6.0)
0.27
(6.8) 0.06
(1.5)
Acess Hole
for Locking Lever
0.25
(6.4)
0.20
(5.0)
0.20
(5.0)
0.36
(9.3)
Ø0.05
(1.2)
0.24
(6.0)
0.04
(1.0)
0.42
(10.7)
0.94
(24.0)
0.20
(5.0)
0.03
(0.8)
0.21"
(5.3mm)
Ø 0.05"
(1.2mm)
0.21"
(5.3mm)
0.21"
(5.4mm)
0.34"
(8.7mm)
PCB Mounting Pattern
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-48 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
Oversize Flush Pushbutton and Pilot Lights
Oversize Extended Non-Illuminated Pushbutton
Oversize Unibody PIlot Lights
Mushroom Pushbuttons
Oversize Selector Switch
Dimensions con’t
NO
NC
C
NO
NC
X2
X1
C
X2
0.94
[
24.0
]
1
.02
[
25.9
]
0.43
[
11.0
]
C
NO
NC
C
NO
NC
0.59
[
15.1
]
1.48
[
37.5
]
NC
NO
NO
NC
C
0.79
[
20.0
]
ÿ
1.18
[
ÿ
30.0
]
1.18 [30.0]
NO
C
NC
NO
C
NC
ÿ
0.94
[
ÿ
23.8
]
0.77
[
19.5
]
0.94 [23.8]
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-49
A2
Switches & Pilot Devices
Terminal Configurations
Oversize Key Switch
Lever Switch
Non Illuminated Pushbutton Pilot Lights Illuminated Pushbuttons Buzzer
AL-KH6SP AL-K6SP
AL-D6 AL-DQ6 AL-DH6
Dimensions con’t
C
C
NC
NO
NC
NO
1.54
[
39.0
]
C
NC
NO
NC
NO
0.94
[
23.8
]
NOCNC
NOCNC
Lamp Terminal
(+)
Lamp Terminal
(–)
X2X2 X1
Lamp Terminal
(+)
Lamp Terminal
(–)
X2X2 X1
NOCNC
NOCNC
Input
Terminal
(X2)
Input
Terminal
(X1)
X2X2
X1 X1
Buzzer
Sound
Switch
Steady Slow Quick
Panel Thickness:
.20 max. (5 max)
1.30
(33)
1.34
(34)
R22
.51
(13)
.41
(10.5)
.93
(23.5)
.94
(24.)
.98
(25)
1.79
(45.5)
.71
(18)
1.79
(45.5)
.75
(19)
.41
(10.5)
.51
(13)
.93
(23.5)
ø24
.94"
Water-proof Gasket
.30
(7.5)
.01
(0.3)
.51
(13) .30
(7.5)
.01
(0.3)
.51
(13)
1.18
(30)
.94
(24)
Water-proof Gasket Water-proof Gasket
.30
(7.5)
.01
(0.3)
.51
(13)
.94
(24)
ø16mm - L6 Series Miniature Switches & Pilot Devices
A2-50 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A2
Switches & Pilot Devices
LED Lamp
H6-VL2 AL-B6 AL-BM6
TOP Marking Side
.69
(17.6)
.16
(4)
.59
(15)
1.85
(47)
.83
(21)
.08
(2)
.65
(16.5)
.70
(18)
.24
(6)
Locking Ring
Gasket
.10
(2.5) .47
(12)
.70
(17.8)
Dimensions con’t
Internal Circuit
LED Chip
Protective Diode
Zener Diode
Miniature Switches & Pilot Devices ø16mm - L6 Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A2-51
A2
Switches & Pilot Devices
General Instructions
Latches
Recess
Engraving
Area
Color Lens Marking Plate Lens Holder
Panel Mounting
Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and
remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel.
Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP
marking on both parts. Slide metal locking lever in direction indicated by LOCK. The yellow plastic safety lever lock can then be snapped onto
the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator.
PCB Mounting
Being able to separate the contacts from the operator allows for assem-
bly of the front panel components (operator and lens) to be performed in
tandem with the PC board assembly and soldering. For applications
where multiple rows of pushbuttons are mounted closely together, or
where other components may obstruct access to the contact locking
lever, be sure to include access holes in the PC board (refer to PC board
layout dimensions for location). Also be sure to allow for space above
and to the side of contact to ensure that no components block the con-
tact block locking lever. PC board pins are designed to rest on the PCB,
take this into consideration to ensure that pins do not short closely
spaced traces.
Pushbutton Assembly
Lamp Installation
Lamps can be replaced in two ways:
1. If contacts are accessible (or pushbutton not installed in a panel) then
it is easiest to first remove the contacts from the operator. This will allow
easy access to the lamp/lamp-holder assembly. Grab lamp, depress
slightly, and turn counter clockwise. Lamp can then be removed by
pushing it back through the lamp holder.
2. If contacts are not accessible, then the lamp can be replaced by first
removing the lens from the operator. Just pull lens straight out either
with a fingernail or optional lens removal tool (MT-101). Lamp/lamp-
holder assembly can then be removed with lamp removal tool (OR-44).
Insert lamp removal tool through operator, depress slightly, turn counter
clockwise, then pull lamp/lamp-holder assembly out. Lamp can then be
removed by pushing it back through the lamp holder.
Engraving Lenses
All buttons and lenses can be engraved directly on the outside surface.
Illuminated lenses also allow for engraving on a plate that is underneath
the colored section of the lens. Remove the colored section of the lens
by pulling on the edge while simultaneously unhooking it from the
latches on the lens holder. The marking plate will then be accessible. It
can then be engraved or a thin marked insert (such as mylar or paper)
can be sandwiched between the marking plate and colored section of
the lens.