Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
NPN Epitaxial Planar Silicon Transistor
27MHz CB Transceiver Driver Applications
Ordering number:ENN485F
2SC2314
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
11504TN (KT)/N1098HA (KT)/2090MO/4147KI/1165MW, TS No.485–1/4
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
2009B
[2SC2314]
˚C
˚C
Electrical Characteristics at Ta = 25˚C
1 : Emitter
2 : Collector
3 : Base
SANYO : TO-126
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC REB 051= Ω57V
egatloVrettimE-ot-rotcelloCV
REC 57V
egatloVrettimE-ot-rotcelloCV
OEC 54V
egatloVesaB-ot-rettimEV
OBE 5V
tnerruCrotcelloCI
C0.1A
)esluP(tnerruCrotcelloCI
PC 5.1A
noitapissiDrotcelloCP
C057Wm
5W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
* : The 2SC2314 are classified by 500mA hFE as follows : Continued on next page.
Tc=25˚C
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloCI
OBC VBC I,V04= E0=0.1Aµ
tnerruCffotuCrettimEI
OBE VBE I,V4= C0=0.1Aµ
egatloVnwodkaerBesaB-ot-rotcelloCV
OBC)RB( ICI,Aµ01= E0=57V
egatloVnwodkaerBrettimE-ot-rotcelloCV
REC)RB( ICR,Am1= EB 051= Ω57V
egatloVnwodkaerBrettimE-ot-rotcelloCV
OEC)RB( ICR,Am1= EB =∞54V
knaRDEF
hEF 021ot06002ot001023ot061
8.04.0
7.011.0
1.5
15.5 3.0
1.6
0.80.8
0.6 0.5
2.7
4.8
2.4
1.2
123
3.0
2SC2314
No.485–2/4
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnwodkaerBesaB-ot-rettimEV
OBE)RB( IEI,Aµ01= C0=5V
niaGtnerruCCD hEF VEC I,V5= CAm005= *06*023
tcudorPhtdiwdnaB-niaGf
TVEC I,V01= CAm05= 081052zHM
ecnaticapaCtuptuOC
bo VBC zHM1=f,V01= 5152Fp
rewoPtuptuOP
OVCC Wm53=iP,zHM72=f,V21= 0.18.1W
ycneiciffErotcelloC ηc.tiucrictsetdeificepseeS 06%
egatloVnoitarutaSrettimE-ot-rotcelloCV
)tas(EC ICI,Am005= BAm05= 2.06.0V
egatloVnoitarutaSrettimE-ot-esaBV
)tas(EB ICI,Am005= BAm05= 9.02.1V
Collector Effieiency Test Circuit
Continued from preceding page.
VCC=12V
INPUT
OUTPUT
10µF
2.2µF
2.2µF
51Ω0.02F
0.005
to 100pF
to 100pF
to 100pF
to 100pF
L1
L2
L1 : 10ø 0.6ø EC 6T
L2 : 10ø 0.6ø EC 12T
2SC2314
+--
2
3
5
2
3
5
100
10
2
3
5
1k
1.0 0.01 23 5 0.1
0.001 23 5 23 5 1.0 23 5 10
VCE=5V
--25°C
25
°C
Ta=75°C
IC -- VCE
ITR05118
IC -- VBE
ITR05120
IC -- VCE
ITR05119
hFE -- IC
ITR05121
01020304050607080
IB=0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0
160
140
40
20
80
60
120
100
0
0
200
400
600
800
1000
0.4 0.8 1.2 1.6 2.0
IB=0
30mA
20mA
15mA
10mA
5mA
0.5mA
2mA
1mA
40mA
0
0
200
400
600
800
1000
1.0mA
0.9mA
0.8mA
0.7mA
0.6mA
0.5mA
0.4mA
0.3mA
0.2mA
0.1mA
--25
°C
25
°C
Ta=75°C
VCE=5V
Collector Current, IC–mA
Collector-to-Emitter Voltage, VCE –V
Collector Current, IC–mA
Collector-to-Emitter Voltage, VCE –V
Base-to-Emitter Voltage, VBE –V
Collector Current, IC–mA
DC Current Gain, hFE
Collector Current, IC–A
2SC2314
No.485–3/4
1
0
2
3
4
5
6
7
8
0 20 40 60 80 100 120 140 160
PC -- Ta
ITR05126
No heat sink
1.0
2
2
3
5
2
5
3
5
3
10
100
1000
0.1 235 1.0
0.01 23
0.001 23 55235
10
--25
°C
Ta=75
°C
VCE(sat) -- IC
ITR05124
IC / IB=10
2
3
5
2
3
5
1.0
0.1
2
3
5
10
0.01 0.01 23 5 0.1
0.001 23 5 23 5 1.0 23 5 10
75
°C
Ta=
--25
°C
VBE(sat) -- IC
ITR05125
IC / IB=10
25
°C
25°C
5710 23 57
100 23 57
1000
1000
7
100
3
5
2
7
3
5
2
fT -- IC
ITR05122
VCE=10V
3
2
5
100
7
7
10
5
Cob -- VCB
1.0 23 5 10
7235
100
7
ITR05123
f=1MHz
Gain-Bandwidth Product, fT–MHz
Collector Current, IC–mA
Output Capacitance, Cob –pF
Collector-to-Base Voltage, VCB -- V
Collector Current, IC–A
Collector-to-Emitter
Saturation Voltage, VCE(sat) –mV
Collector Current, IC–A
Base-to-Emitter
Saturation Voltage, VBE(sat) –V
Collector Dissipation, P
C
–W
Ambient Temperature, Ta –˚C
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 2004. Specifications and information herein are subject
to change without notice.
2SC2314
PS No.485–4/4
