LBT CONNECTOR A Type Emboss Tape Disconnectable Crimp style connectors Specifications ------------------- * Current rating: Signal circuit/ 0.5 A AC, DC (AWG #28) Power supply circuit/ 7.0 A AC, DC (AWG #20) * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Signal circuit Initial value/ 20 m max. After environmental tests/ 40 m max. Power supply circuit Initial value/ 15 m max. After environmental tests/ 30 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire: Signal circuit Conductor size/ AWG #28 Insulation O.D./ 0.6 to 0.8 mm Power supply circuit Conductor size/ AWG #28 to #20 Insulation O.D./ 1.11 to 1.44 mm * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. This connector is for connecting the lithium polymer battery or for connecting DC-IN, and has the sequence structure for connection to the power supply circuit in preference to connection to the signal circuit by dividing the signal circuit and power supply circuit clearly. Moreover, this is the low profile connector (space saving) for applying the high current by adopting the heat radiation structure. * Connector for power supply (7A) * Low profile (Space saving) * Hybrid model of Signal circuit + Power supply circuit * Heat radiation structure * Sequence structure * High-strength * Check of incomplete mating Standards----------------------- 0 Recognized E60389 PC board layout and Assembly layout 0.05 A 0.05 0.6 Circuit No.1 0.05 9.9 0.05 2.5 1.25 0.05 2.9 0.05 0.5 1.2 0.05 5.65 4.8 1 0.05 +0.1 0 3 2.75 1.55 0.05 C 0.05 0.05 1 0.05 2.05 0.05 B 0.05 1.5 1.5 0.05 +0.1 0 0.05 0.25 +0.1 0 Header outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. 1 LBT CONNECTOR A Type Contact Power supply Applicable wire mm2 AWG # Insulation O.D. (mm) 0.220.5 2420 1.111.44 7,000 0.08 28 0.60.8 23,000 Model No. 1.7 5.9 Power supply 2.6 0.6 1.2 SLBTAD-01T-M0.5 Signal 1.45 2.9 SSH-003T-P0.2-H Q'ty/ reel Material and Finish Power supply: Copper alloy, tin-plated (reflow treatment) Signal: Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Signal 3.9 2 1.6 0.8 0.8 1.35 0.5 0.45 Applicable wire Crimping machine Contact SLBTAD-01T-M0.5 0.220.5 AP-K2N SSH-003T-P0.2-H 2420 0.08 AP-K2N Applicator Insulation O.D. (mm) AWG # mm2 Crimp applicator Dies Crimp applicator with dies MKS-L MK/SLBTAD-01-05 APLMK SLBTAD01-05 - - - MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 1.111.44 28 0.60.8 Note: 1. *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 2. Contact JST for fully automatic crimping applicator. Housing Circuits Power supply D Model No. Signal LBTAR-09V-2K-K(HF) LBTAR-07V-2K-K(HF) LBTAR-05V-2K-K(HF) LBTAR-03V-2K-K(HF) 7 B 2 3 C 5 3 1 Dimensions (mm) B C D Q'ty/ bag 9.45 6.0 15.1 2,000 7.45 4.0 13.1 2,000 5.45 2.0 11.1 3,000 3.45 - 9.1 3,000 7.45 Material PBT, UL94V-0 RoHS compliance Circuit No.1 mark Header Circuits Power supply Signal 7 2 K-A 3 3 JST 5 0.8 1 C B A 6.55 Dimensions (mm) A B C D SM09B-LBTAKS-TD-N2T-K(HF) 14.2 9.45 SM07B-LBTAKS-TD-N2T-K(HF) 12.2 7.45 SM05B-LBTAKS-TD-N2T-K(HF) 10.2 5.45 SM03B-LBTAKS-TD-N2T-K(HF) 8.2 3.45 Q'ty/ reel 6.0 15.1 1,500 4.0 13.1 1,500 2.0 11.1 1,500 - 9.1 1,500 Material and Finish 0.8 1 Model No. 0.25 Signal contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Power supply contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: Heat resisting resin, UL94V-0 Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance Note: The products listed above are supplied on embossed-tape. 2