RCMX0510004FHA22 - Vishay Presicion Group

RCMX02, RCMX05, RCMX1

Vishay Sfernice

Molded Metal Film High Ohmic Value (to 50 MΩ) Resistors

www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 52008

168 Revision: 05-Oct-09

FEATURES

•0.125 W to 0.5 W at 70 °C

•According to CECC 40 101043

•Resistance range: 300 kΩ to 50 MΩ

•Good initial precision: Up to ± 1 %

•High long term stability drift < 1 % after 1000 h

•Accurate dimensions

•Good insulation typical values: 10 MΩ

•Limiting element voltages: 500 V, 800 V and 1200 V

•Termination = Pure matte tin

•Compliant to RoHS directive 2002/95/EC

DIMENSIONS in millimeters

SERIES

DIMENSIONS

AØ BØ C

UNIT WEIGHT

IN g

RCMX02 6.5 ± 0.2 2.5 - 0

- 0.2 0.6 0.26

RCMX05 10.2 ± 0.2 3.65 ± 0.1 0.6 0.46

RCMX1 16 ± 0.5 6.2 ± 0.2 0.8 1.30

TECHNICAL SPECIFICATIONS

VISHAY SFERNICE SERIES RCMX02 RCMX05 RCMX1

Reference according to NFC 83 230 RS80 RS81 RS82

Power Rating at 70 °C 0.125 W 0.250 W 0.500 W

Resistance Value Range 300 kΩ to 10 MΩ1 MΩ to 20 MΩ2 MΩ to 50 MΩ

Tolerance and Associated Series ± 1 %

E96

± 1 %

E96

± 5 %

E24

Maximum Voltage 500 V 750 V 1000 V

Critical Resistance 2 MΩ2.55 MΩ2.87 MΩ

Temperature Coefficient

Rated in the Range - 55 °C to + 125 °C K3 ≤ ± 50 ppm/°C

Insulation Resistance (Typical) ≥ 107 MΩ (500 VDC)

Voltage Coefficient ≤ 10 ppm/V

Environmental Specifications - 65 °C/+ 155 °C/10 days

25 min. 25 min.

Ø C

Ø B

Document Number: 52008 For technical questions, contact: sfer@vishay.com www.vishay.com

Revision: 05-Oct-09 169

RCMX02, RCMX05, RCMX1

Molded Metal Film High Ohmic Value (to 50 MΩ) Resistors Vishay Sfernice

POWER RATING TEMPERATURE RISE

PRACTICAL OPERATING TOLERANCES

After 1000 h load life at rated power 90’/30’ cycles + 70 °C ambient temperature, the typical total drifts, measured at + 70 °C, are

as follows:

Typical total drift = drift due to TCR (K3) + life drift 0.5 %.

Maximum deviation from rated ohmic value including ± 1 % manufacturing tolerance ≤ 1.5 %.

PERFORMANCE

ACCORDING TO CECC 40 101043 TYPICAL VALUES

AND DRIFTS

TESTS CONDITIONS REQUIREMENTS

Load Life at Max. Category

Temperature 1000 h at 125 °C 33 % of Pn≤ ± 1 %

Insulation resistance > 1 GΩ

± 2 % at 1000 h

Insulation resistance 106 MΩ

Short Time Overload 2.5 Um/5 s

limited to 2 Un≤ ± 0.25 % ± 0.5 %

Damp Heat Humidity

(Steady State)

10 days

with low load

≤ ± 1 %

Insulation resistance > 102 MΩ± 1.5 %

Rapid Temperature Change - 55 °C + 125 °C ≤ ± 0.25 % ± 0.25 %

Climatic Sequence - 55 °C + 125 °C

severity 1

≤ ± 1 %

Insulation resistance > 100 MΩ

± 1 %

Insulation resistance 106 MΩ

Terminal Strength Pull - twist - 2 bends ≤ ± 0.25 % ± 0.05 %

Vibration 10 to 500 Hz ≤ ± 0.25 % ± 0.05 %

Soldering (Thermal Shock) + 260 °C 10 s ≤ ± 0.25 % ± 0.1 %

Load Life Cycle 90’/30’

1000 h at Pn at 70 °C

≤ ± 1 %

Insulation resistance > 1 GΩ

± 0.5 %

Insulation resistance 106 MΩ

Shelf Life 1 year

ambient temperature - ± 0.25 %

AMBIENT TEMPERATURE IN °C

100

00 30 50 70 100 125 150

RATED POWER IN %

RATED POWER IN W

00 0.25 0.5 0.75 1

HOT SPOT TEMPERATURE IN°C

RCMX05

RCMX01

RCMX02

RCMX02, RCMX05, RCMX1

Vishay Sfernice Molded Metal Film High Ohmic Value (to 50 MΩ) Resistors

www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 52008

170 Revision: 05-Oct-09

MARKING

Printed: Vishay Sfernice trademark, series, style, ohmic value (in Ω), tolerance (in %), temperature coefficient, manufacturing

date. Due to lack of space RCMX02 is printed MX02.

GLOBAL PART NUMBER INFORMATION

GLOBAL

MODEL SIZE SPECIAL OHMIC VALUE TOLERANCE TEMPERATURE

COEFFICIENT PA C K AG I N G

RCMX 02

As applicable.

The first four digits are

significant figures and the

last digit specifies the

number of zeros to follow.

R designates decimal

point.

13001 = 13 kΩ

33001 = 33 kΩ

220R0 = 220 Ω

1R220 = 1.22 Ω

F = 1 %

J = 5 %

H = K3, 50 ppm/K AM500 = A20

AM1000 = A22

BAG100* = S14

BAG50* = S09

*: possible in

N/A

X02 130 1 H 1C MR 0JS4

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.