2N3773 High power NPN transistor Features High power dissipation Low collector-emitter saturation voltage Description The device is a planar NPN transistor mounted in TO-3 metal case. It is intended for linear amplifiers and inductive switching applications. 1 2 TO-3 Figure 1. Table 1. Internal schematic diagram Device summary Order code Marking Package Packaging 2N3773 2N3773 TO-3 Tray October 2008 Rev 2 1/7 www.st.com 7 Electrical ratings 1 2N3773 Electrical ratings Table 2. Absolute maximum ratings Symbol Value Unit VCEO Collector-emitter voltage (IB = 0) 140 V VCEV Collector-emitter voltage (V BE = -1.5 V) 160 V VCBO Collector-base voltage (IE = 0) 160 V VEBO Emitter-base voltage (IC = 0) 7 V Collector current 16 A Collector peak current (tP < 5 ms) 30 A Base current 4 A IBM Base peak current (tP < 1 ms) 15 A Ptot Total dissipation at Tc 25 C 150 W Tstg Storage temperature -65 to 200 C 200 C IC ICM IB Tj Table 3. Symbol Rthj-case 2/7 Parameter Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case ____M__mMax Value Unit 1.17 C/W 2N3773 2 Electrical characteristics (Tcase = 25 C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter Test conditions Min. VCE = 140 V Typ. Max. Unit 2 10 mA mA ICEV Collector cut-off current (VBE = -1.5 V) ICEO Collector cut-off current (IB = 0) VCE = 120 V 10 mA ICBO Collector cut-off current (IE = 0) VCB = 140 V 2 mA IEBO Emitter cut-off current (IC = 0) VEB = 7 V 5 mA Collector-emitter sustaining voltage (IB = 0) IC = 0.2 A 140 V Collector-emitter VCEV(sus) (1) sustaining voltage (VBE = -1.5 V) IC = 0.1 A 160 V Collector-emitter VCER(sus) (1) sustaining voltage (RBE = 100 ) IC = 0.2 A 150 V VCEO(sus) (1) VCE = 140 V TC = 150 C Collector-emitter saturation voltage IC = 8 A IB = 0.8 A IC = 16 A IB = 3.2 A 1.4 4 V V VBE (1) Base-emitter voltage IC = 8 A V CE = 4 V 2.2 V hFE (1) DC current gain IC = 8 A V CE = 4 V IC = 16 A V CE = 4 V VCE(sat) (1) Is/b Second Breakdown Collector Current VCE = 30 V t = 1 s (non repetitive) 15 5 5 60 A 1. Pulsed: Pulse duration = 300 s, duty cycle 2 % 3/7 Package mechanical data 3 2N3773 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 4/7 2N3773 TO-3 mechanical data mm. DIM. min. typ max. A 11.00 13.10 B 0.97 1.15 C 1.50 1.65 D 8.32 8.92 E 19.00 20.00 G 10.70 11.10 N 16.50 17.20 P 25.00 26.00 R 4.00 4.09 U 38.50 39.30 V 30.00 30.30 0015923C 5/7 Revision history 4 2N3773 Revision history Table 5. 6/7 Document revision history Date Revision Changes 03-Apr-2006 1 Initial release. 10-Oct-2008 2 Content reworked to improve readability, no technical changes. 2N3773 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7