RLP Vishay Sfernice Insulated Precision Wirewound Resistors Axial Leads FEATURES * 1 W to 10 W at 25 C * CECC 40201-006 RoHS * Conforms to EN 140-100 In wirewound precision resistors, the RLP series holds a leading position in professional applications whenever an excellent stability of the ohmic value and a correspondingly low temperature coefficient are required at the same time. COMPLIANT * Excellent stability < 0.3 % after 1000 h * High power up to 10 W at 25 C * Low ohmic values 10 m available The RLP model resistors comply with the most stringent requirements of the EN 140-100 specification. The series consists of 5 models covering the power range from 1 W to 10 W. Non-inductive versions can be supplied on request by specifying RLP-NI. For higher power dissipations, the use of RH series resistors is recommended. * Low temperature coefficient 50 ppm/C * Electrical insulation * Climatic protection * Termination = Pure matte tin or Sn/Ag/Cu according to the ohmic value DIMENSIONS in millimeters INSULATED 25 min. A OB OE DIMENSIONS in millimeters 25 min. MOLDED O a 0.02 SERIES AND STYLE 45 chamfer max. 0.25 deep RLP 1 RLP 2 RLP 3 RLP 6 RLP 10 7 10.2 14 23.82 46.78 R > 0.15 2.5 4.0 5.54 8.71 10.32 R 0.15 - 6 9 11 180K E 0.1 0.6 0.6 0.8 0.8 0.8 Weight in g 0.27 0.48 1.3 3.4 8.6 A max. 4 4 RLP1 - RLP2 a = 1 mm RLP3 - 6 - 10 a = 1.2 mm L max. OB max. MOLDED 25 min. OE A 25 min. OB INSULATED RLP 1 - RLP 2 TECHNICAL SPECIFICATIONS VISHAY SFERNICE SERIES AND STYLE RLP1 NF C 83-210 Ohmic Range in Relation to Tolerance RLP3 RLP6 RLP10 RP8 RP7 RP4 - - A B C - - 1W 2W 3W 6W 10 W 5 % E24 0.05 2 k 0.025 6.8 k 0.01 15 k 0.02 59 k 0.06 150 k 2 % E48 0.05 2 k 0.025 6.8 k 0.03 15 k 0.02 59 k 0.06 150 k 1 % E96 0.05 2 k 0.025 6.8 k 0.03 15 k 0.02 59 k 0.06 150 k 0.5 % E96 0.4 2 k 0.4 6.8 k 0.0499 15 k 0.3 59 k 0.3 150 k CECC 40201-006 Power Rating at + 25 C RLP2 VISHAY SFERNICE Limits 0.1 % E96 Please consult VISHAY SFERNICE 1 470 Qualified Ohmic Range NF C 83-210 Limiting Element Voltage 50 V Critical Resistance 0.2 1.78 k 0.1 3.57 k 120 V 200 V out of nominal ohmic range 0.1 12.1 k 0.1 40.2 k 300 V 720 V 17 800 51 100 Undergoes European Quality Insurance System (CECC) www.vishay.com 41 For technical questions, contact: sfer@vishay.com Document Number: 50009 Revision: 01-Oct-07 RLP Insulated Precision Wirewound Resistors Axial Leads Vishay Sfernice PERFORMANCE TESTS REQUIREMENTS CONDITIONS TYPICAL VALUES MIL-R-26 E CECC40201-06 AND DRIFTS Dielectric w/s Voltage 500 VRMS for RLP 1-2-3 1000 VRMS for RLP 6-10 (0.1 % + 0.05 ) - (0.05 % + 0.05 ) Short Time Overload 5 Pn/5 s for Pn < 5 W 10 Pn/5 s for Pn 5 W (0.2 % + 0.05 ) 0.25 % + 0.05 (0.1 % + 0.05 ) Climatic Sequence EN 140-201 fasc. 19A - 55 C/+ 200 C 5 cycles - 0.5 % + 0.05 Insulation R > 100 M (0.2 % + 0.05 ) Ins. resistance > 103 M Humidity (Steady State) EN 140-201 fasc. 3A 56 days 95 % R.H. - 0.5 % + 0.05 Insulation R > 100 M (0.25 % + 0.05 ) Ins. resistance > 103 M Vibration MIL-STD-202 Method 204 - Test D: 20 g 10/2000 Hz (0.1 % + 0.05 ) 0.25 % + 0.05 (0.05 % + 0.05 ) Load Life MIL-STD-202 Method 108 Pn 1000 h (0.5 % + 0.05 ) 0.5 % + 0.05 Insulation R 1 G (0.3 % + 0.05 ) MIL-STD-202 Method 106 (0.2 % + 0.05 ) Insulation resistance > 100 M - (1 % + 0.05 ) Ins. resistance > 103 M 250 h at + 275 C (0.5 % + 0.05 ) 0.5 % + 0.05 Insulation R 1 G (0.25 % + 0.05 ) MIL-STD-202 100 g Method 205 - Test C (0.1% + 0.05 ) 0.25 % + 0.05 (0.05 % + 0.05 ) Moisture Resistance High Temperature Shock TEMPERATURE COEFFICIENT IN THE RANGE - 55 C TO + 200 C LIMITS OHMIC RANGE NF C TYPICAL VALUE MIL <1 100 ppm/C 90 ppm/C 1 to < 10 50 ppm/C 50 ppm/C 10 25 ppm/C 30 ppm/C 50 ppm/C + 0 to - 20 ppmC STABILITY AND POWER RATING Stability changes slightly according to power rating and ambient temperature. This fact is especially important for users needing a life drift lower than the initial resistance tolerance. Typical drifts, after 2000 hours life test made under the 90'/30' conditions and at an ambient temperature of 25 C, are: OHMIC RANGE Pn 0.5 Pn RLP1 RLP2 1W 2W 0.5 W 1W RLP3 R % R% RLP6 RLP10 3W 5W 10 W 0.3 1.5 W 2.5 W 5W 0.15 INDUCTANCE (Example) 1.4 00 RLP3 1 1.3 1.2 INDUCTANCE IN H 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 RLP3 NI 100 0.2 0.1 0 0.1 1 10 FREQUENCY IN MHz Document Number: 50009 Revision: 01-Oct-07 For technical questions, contact: sfer@vishay.com www.vishay.com 42 RLP Insulated Precision Wirewound Resistors Axial Leads Vishay Sfernice POWER RATING CHART 125 % RATED POWER 100 75 50 37 25 0 0 50 100 150 200 250 275 300 350 AMBIENT TEMPERATURE IN C TEMPERATURE RISE RL P6 P RL 10 RL 200 P3 RLP 2 HOT SPOT TEMPERATURE IN C 250 RLP 1 150 100 50 0 0 1.5 3.0 4.5 6.0 7.5 10.0 RATED POWER IN W MARKING SFERNICE trademark, series, style, CECC style (if applicable) nominal resistance (in , k), tolerance (in %), manufacturing date. ORDERING INFORMATION RLP 1 MODEL STYLE XXX 5U5 5% TR100 e1 (e3: RLP1 < 1R RLP2 < 3R52) NON INDUCTIVE WINDING SPECIAL DESIGN OHMIC VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE Optional Method N Optional Custom items are subject to extra-charge and min. order. Please see price list. (NI) Optional SAP PART NUMBERING GUIDELINES RLP 01 5R500 J R15 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING www.vishay.com 43 For technical questions, contact: sfer@vishay.com Document Number: 50009 Revision: 01-Oct-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1