Transitions 301A511 to 514 Slimline T Transition As Supplied (a) P H Dia. J Dia. HO Tan W H Dia. K Dia. K After Unrestricted Recovery (b) P H Dia. 4 J Dia. J Dia. HO Tan 301A511 to 514 Tan Molded Parts W H Dia. JO KO K Dia. K Applications Provides strain 301A511relief to 514 and mechanical protection on cable harness assemblies. Materials Available Material Dash Number -50 -51 -71 -125 Material Description Viton(R) polymer blend Elastomer polymer blend Flexible polyolefin Fluoropolymer Precoating No. N/A /164 /42 or /86 N/A Adhesive Part No. S-1125 S-1124 S-1017 or S-1048 S-1255-04 *For more information, please see the appropriate material page in this section. **For more information, please see section 5. Product Dimensions H Part No. 301A511 301A512 301A513 301A514* VITON is a trademark of DuPont Performance Elastomers Min. a 19.8 [.78] 34.3 [1.35] 60.2 [2.37] 83.3 [3.28] Max. b 6.6 [.26] 11.4 [.45] 20.1 [.79] 33.3 [1.31] J&K Min. a 13.2 [.52] 22.9 [.90] 40.1 [1.58] 54.9 [2.16] Max. b 6.6 [.26] 11.4 [.45] 20.1 [.79] 33.3 [1.31] HO, JO, & KO 10% b W Nom. b P Nom. b 25.4 [1.00] 41.1 [1.62] 63.5 [2.50] 88.9 [3.50] 1.02 [.04] 1.27 [.05] 1.52 [.06] 1.78 [.07] 80.8 [3.18] 120.4 [4.74] 175.8 [6.92] 242.3 [9.54] Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max. *301A514 is not available in -125 Fluoropolymer material. 4-77 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171