Not for new design. Use new F461-F464 Series. Loose R79 MKP Series Taped METALLIZED POLYPROPYLENE FILM CAPACITOR MULTIPURPOSE APPLICATIONS Typical applications: timing, oscillator circuits, high frequency coupling and decoupling. p = 5mm PRODUCT CODE: R79 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 R 7 9 4 5 6 7 8 9 10 11 12 13 C 14 - Digit 1 to 3Series code Digit 4 d.c. rated voltage: G = 160V I = 250V M = 400V P = 630V Digit 5 Pitch: C = 5mm Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: H=2.5%; J=5%; K=10% Pitch (mm) Box thickness (mm) 5.0 5.0 4.5 AMMO-PACK REEL O 355mm Loose, short leads Loose, long leads Lead length Ordering code (mm) (Digit 10 to 11) 4 +1.5 17 +1/-2 H +0.1 H +0.1 L +0.2 L +0.3 Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. tinned wire, low thermical conductivity. Leads: Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Marking: manufacturer's logo, series (R79), capacitance, tolerance, D.C. rated voltage. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents: IEC 60384-16 Winding scheme single sided metallized polypropylene film DQ CK AA Z3 Note: Ammo-pack is the preferred packaging for taped version. 09/2008 B +0.1 B +0.1 GENERAL TECHNICAL DATA Table 1 (for more detailed information, please refer to page 14) Standard packaging style <4.5 Maximum dimensions (mm) B max H max L max 134 Not for new design. Use new F461-F464 Series. R79 MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R79 Rated Cap. 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 F F F F F F F F F F 160Vdc/70Vac Std dimensions B H L 3.5 7.5 7.2 4.5 9.5 7.2 4.5 9.5 7.2 4.5 9.5 7.2 5.0 10.0 7.2 5.0 10.0 7.2 6.0 11.0 7.2 6.0 11.0 7.2 7.2 13.0 7.2 7.2 13.0 7.2 p 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Max dv/dt (V/s) 100 100 100 100 100 100 100 100 100 100 Max K0 (V2/s) 32 E3 32 E3 32 E3 32 E3 32 E3 32 E3 32 E3 32 E3 32 E3 32 E3 R79GC2390--4-R79GC2470--4-R79GC2560--4-R79GC2680--4-R79GC2820--4-R79GC3100--4-R79GC3120--4-R79GC3150--4-R79GC3180--4-R79GC3220--4-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) Rated Cap. 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 F F F F F F F F F F F F F F 250Vdc/160Vac Std dimensions B H L p 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 5.0 10.0 7.2 5.0 6.0 11.0 7.2 5.0 6.0 11.0 7.2 5.0 7.2 13.0 7.2 5.0 7.2 13.0 7.2 5.0 Max dv/dt (V/s) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Max K0 Part Number (V2/s) 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 125 E3 R79IC2120--4-R79IC2150 --4-R79IC2180 --4-R79IC2220 --4-R79IC2270 --4-R79IC2330 --4-R79IC2390 --4-R79IC2470 --4-R79IC2560 --4-R79IC2680 --4-R79IC2820 --4-R79IC3100 --4-R79IC3120 --4-R79IC3150 --4-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) Rated Cap. Part Number 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 F 0.012 F 0.015 F 0.018 F 0.022 F 0.027 F 0.033 F 0.039 F 0.047 F Rated Cap. 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 F 0.012 F 0.015 F 0.018 F 400Vdc/200Vac Std dimensions B H L p 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 5.0 10.0 7.2 5.0 5.0 10.0 7.2 5.0 6.0 11.0 7.2 5.0 6.0 11.0 7.2 5.0 7.2 13.0 7.2 5.0 7.2 13.0 7.2 5.0 Max dv/dt (V/s) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 630Vdc/220Vac* Std dimensions B H L p 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 5.0 10.0 7.2 5.0 5.0 10.0 7.2 5.0 6.0 11.0 7.2 5.0 6.0 11.0 7.2 5.0 7.2 13.0 7.2 5.0 7.2 13.0 7.2 5.0 Max dv/dt (V/s) 500 500 500 500 500 500 500 600 600 600 600 600 600 600 600 600 Max K0 (V2/s) 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 320 E3 Part Number R79MC1390--4-R79MC1470--4-R79MC1560--4-R79MC1680--4-R79MC1820--4-R79MC2100--4-R79MC2120--4-R79MC2150--4-R79MC2180--4-R79MC2220--4-R79MC2270--4-R79MC2330--4-R79MC2390--4-R79MC2470--4-- Max K0 Part Number (V2/s) 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 630 E3 R79PC1100--4-R79PC1120--4-R79PC1150--4-R79PC1180--4-R79PC1220--4-R79PC1270--4-R79PC1330--4-R79PC1390--4-R79PC1470--4-R79PC1560--4-R79PC1680--4-R79PC1820--4-R79PC2100--4-R79PC2120--4-R79PC2150--4-R79PC2180--4-- Mechanical version and packaging (Table1) Internal use Tolerance: H (2.5%); J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 135 09/2008 Not for new design. Use new F461-F464 Series. R79 MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R79 ELECtrical characteristics test method and performance Rated voltage (VR): Damp heat, steady state: 160Vdc - 250 Vdc 400 Vdc - 630 Vdc Rated temperature (TR): Test conditions Temperature: Relative humidity (RH): Test duration: +85C Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. Capacitance range: Performance Capacitance change |C/C |: 3% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. 1000pF to 0.22 F Capacitance values: E12 series (IEC 60063 Norm). Endurance: Test conditions Capacitance tolerances (measured at 1 kHz): 2.5% (H); 5% (J); 10% (K). Temperature: Test duration: Voltage applied: Total self-inductance (L): 6 nH (lead length 2 mm). Performance kHz 001 010 100 MKP C0.1 F tgx10-4 060 10 30 MKP C>0.1 F tgx10-4 060 10 Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C |: 2% DF change (tg): 10x10-4 at 10kHz Insulation resistance: initial limit. Dielectric absorption (DA): 0.05% Insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 100Vdc Performance 1x105 M (Typ.value: 5x105 M) Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C |: 0.5% Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C. 09/2008 +85C2C 1000 h 1.25xVR Capacitance change |C/C |: 3% DF change (tg): 10x10-4 at 10kHz Insulation resistance: 50% of initial limit. Temperature coefficient (ppm/C): -200 (typical value). Dissipation factor (DF): tgd 10-4 at +25C 5C +40C2C 93%2% 56 days 136 Not for new design. Use new F461-F464 Series. R79 MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R79 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Note: p (pitch) in mm. 137 09/2008 Not for new design. Use new F461-F464 Series. R79 MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R79 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Note: p (pitch) in mm. Digitally signed by Marcy Brand DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com Date: 2012.07.18 12:12:33 -04'00' Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. 09/2008 138