4.16.17.13.14 - DUCATI energia

09/2008 134

R79

MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

MULTIPURPOSE APPLICATIONS

Typical applications: timing, oscillator circuits, high

frequency coupling and decoupling.

PRODUCT CODE: R79 p = 5mm

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: aluminium layer deposited by evaporation under

vacuum.

Winding: non-inductive type.

Leads: tinned wire, low thermical conductivity.

Protection: plastic case, thermosetting resin lled.

Box material is solvent resistant and ame

retardant according to UL94.

Marking: manufacturer’s logo, series (R79), capacitance,

tolerance, D.C. rated voltage.

Climatic category: 55/105/56 IEC 60068-1

Operating temperature range: -55 to +105°C

Related documents: IEC 60384-16

Winding scheme

PRODUCT CODE SYSTEM

The part number, comprising 14 digits, is formed as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

R 7 9 C -

Digit 1 to 3 Series code

Digit 4 d.c. rated voltage:

G = 160V I = 250V

M = 400V P = 630V

Digit 5 Pitch: C = 5mm

Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of

Capacitance value and the 6th digit indicates

the number of zeros that must be added to

obtain the Rated Capacitance in pF.

Digit 10 to 11 Mechanical version and packaging (table 1)

Digit 12 Identies the dimensions and electrical

characteristics.

Digit 13 Internal use.

Digit 14 Capacitance tolerance:

H=2.5%; J=5%; K=10%

Table 1 (for more detailed information, please refer to page 14)

Standard

packaging style

Lead length

(mm)

Ordering code

(Digit 10 to 11)

AMMO-PACK DQ

REEL Ø 355mm CK

Loose, short leads

Loose, long leads

4 +1.5

17 +1/-2

Note: Ammo-pack is the preferred packaging for taped version.

single sided metallized

polypropylene lm

Loose Taped

All dimensions are in mm.

Pitch Box thickness Maximum dimensions (mm)

(mm) (mm) B max H max L max

5.0 <4.5 B +0.1 H +0.1 L +0.2

5.0 ≥4.5 B +0.1 H +0.1 L +0.3

Not for new design. Use new F461-F464 Series.

09/2008

135

R79

MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

MULTIPURPOSE APPLICATIONS

p = 5 mm

PRODUCT CODE: R79

Rated

Cap.

400Vdc/200Vac

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

3900 pF 3.5 7.5 7.2 5.0 400 320 E3 R79MC1390--4--

4700 pF 3.5 7.5 7.2 5.0 400 320 E3 R79MC1470--4--

5600 pF 3.5 7.5 7.2 5.0 400 320 E3 R79MC1560--4--

6800 pF 3.5 7.5 7.2 5.0 400 320 E3 R79MC1680--4--

8200 pF 3.5 7.5 7.2 5.0 400 320 E3 R79MC1820--4--

0.010 µF 3.5 7.5 7.2 5.0 400 320 E3 R79MC2100--4--

0.012 µF 4.5 9.5 7.2 5.0 400 320 E3 R79MC2120--4--

0.015 µF 4.5 9.5 7.2 5.0 400 320 E3 R79MC2150--4--

0.018 µF 5.0 10.0 7.2 5.0 400 320 E3 R79MC2180--4--

0.022 µF 5.0 10.0 7.2 5.0 400 320 E3 R79MC2220--4--

0.027 µF 6.0 11.0 7.2 5.0 400 320 E3 R79MC2270--4--

0.033 µF 6.0 11.0 7.2 5.0 400 320 E3 R79MC2330--4--

0.039 µF 7.2 13.0 7.2 5.0 400 320 E3 R79MC2390--4--

0.047 µF 7.2 13.0 7.2 5.0 400 320 E3 R79MC2470--4--

Rated

Cap.

630Vdc/220Vac*

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

1000 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1100--4--

1200 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1120--4--

1500 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1150--4--

1800 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1180--4--

2200 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1220--4--

2700 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1270--4--

3300 pF 3.5 7.5 7.2 5.0 500 630 E3 R79PC1330--4--

3900 pF 4.5 9.5 7.2 5.0 600 630 E3 R79PC1390--4--

4700 pF 4.5 9.5 7.2 5.0 600 630 E3 R79PC1470--4--

5600 pF 4.5 9.5 7.2 5.0 600 630 E3 R79PC1560--4--

6800 pF 5.0 10.0 7.2 5.0 600 630 E3 R79PC1680--4--

8200 pF 5.0 10.0 7.2 5.0 600 630 E3 R79PC1820--4--

0.010 µF 6.0 11.0 7.2 5.0 600 630 E3 R79PC2100--4--

0.012 µF 6.0 11.0 7.2 5.0 600 630 E3 R79PC2120--4--

0.015 µF 7.2 13.0 7.2 5.0 600 630 E3 R79PC2150--4--

0.018 µF 7.2 13.0 7.2 5.0 600 630 E3 R79PC2180--4--

Rated

Cap.

160Vdc/70Vac

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

0.039 µF 3.5 7.5 7.2 5.0 100 32 E3 R79GC2390--4--

0.047 µF 4.5 9.5 7.2 5.0 100 32 E3 R79GC2470--4--

0.056 µF 4.5 9.5 7.2 5.0 100 32 E3 R79GC2560--4--

0.068 µF 4.5 9.5 7.2 5.0 100 32 E3 R79GC2680--4--

0.082 µF 5.0 10.0 7.2 5.0 100 32 E3 R79GC2820--4--

0.10 µF 5.0 10.0 7.2 5.0 100 32 E3 R79GC3100--4--

0.12 µF 6.0 11.0 7.2 5.0 100 32 E3 R79GC3120--4--

0.15 µF 6.0 11.0 7.2 5.0 100 32 E3 R79GC3150--4--

0.18 µF 7.2 13.0 7.2 5.0 100 32 E3 R79GC3180--4--

0.22 µF 7.2 13.0 7.2 5.0 100 32 E3 R79GC3220--4--

Rated

Cap.

250Vdc/160Vac

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

0.012 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2120--4--

0.015 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2150 --4--

0.018 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2180 --4--

0.022 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2220 --4--

0.027 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2270 --4--

0.033 µF 3.5 7.5 7.2 5.0 250 125 E3 R79IC2330 --4--

0.039 µF 4.5 9.5 7.2 5.0 250 125 E3 R79IC2390 --4--

0.047 µF 4.5 9.5 7.2 5.0 250 125 E3 R79IC2470 --4--

0.056 µF 4.5 9.5 7.2 5.0 250 125 E3 R79IC2560 --4--

0.068 µF 5.0 10.0 7.2 5.0 250 125 E3 R79IC2680 --4--

0.082 µF 6.0 11.0 7.2 5.0 250 125 E3 R79IC2820 --4--

0.10 µF 6.0 11.0 7.2 5.0 250 125 E3 R79IC3100 --4--

0.12 µF 7.2 13.0 7.2 5.0 250 125 E3 R79IC3120 --4--

0.15 µF 7.2 13.0 7.2 5.0 250 125 E3 R79IC3150 --4--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%)

Mechanical version and packaging (Table1)

Internal use

Tolerance: H (±2.5%); J (±5%); K (±10%)

Mechanical version and packaging (Table1)

Internal use

Tolerance: H (±2.5%); J (±5%); K (±10%)

All dimensions are in mm.

Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the

maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.

The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in

the above table. The dv/dt test is carried out at 2 times the above values.

*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).

Not for new design. Use new F461-F464 Series.

09/2008 136

R79

MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

MULTIPURPOSE APPLICATIONS

p = 5 mm

PRODUCT CODE: R79

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions

Temperature: +40°C±2°C

Relative humidity (RH): 93%±2%

Test duration: 56 days

Performance

Capacitance change |∆C/C |: ≤3%

DF change (∆tgδ): ≤10x10-4 at 1kHz

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +85°C±2°C

Test duration: 1000 h

Voltage applied: 1.25xVR

Performance

Capacitance change |∆C/C |: ≤3%

DF change (∆tgδ): ≤10x10-4 at 10kHz

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen):10 s±1 s

Performance

Capacitance change |∆C/C |: ≤2%

DF change (∆tgδ): ≤10x10-4 at 10kHz

Insulation resistance: ≥ initial limit.

Long term stability (after two years):

Storage: standard environmental conditions (see page 12).

Performance

Capacitance change |∆C/C |: ≤0.5%

ELECTRICAL CHARACTERISTICS

Rated voltage (VR): 160Vdc - 250 Vdc 400 Vdc - 630 Vdc

Rated temperature (TR): +85°C

Temperature derated voltage:

for temperatures between +85°C and +105°C a

decreasing factor of 1.25% per degree C on the rated

voltage VR (d.c. and a.c.) has to be applied.

Capacitance range: 1000pF to 0.22 µF

Capacitance values:

E12 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±2.5% (H); ±5% (J); ±10% (K).

Total self-inductance (L): ≈ 6 nH

(lead length ≈2 mm).

Temperature coefcient (ppm/°C):

-200 (typical value).

Dissipation factor (DF):

tgd 10-4 at +25°C ±5°C

kHz MKP C≤0.1 µF MKP C>0.1 µF

tgδx10-4 tgδx10-4

001 ≤060 ≤060

010 ≤10 ≤ 10

100 ≤30

Dielectric absorption (DA): 0.05%

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100Vdc

Performance

≥1x105 MΩ (Typ.value: 5x105 MΩ)

Test voltage between terminations:

1.6xVR applied for 2 s at +25°C±5°C.

Not for new design. Use new F461-F464 Series.

09/2008

137

R79

MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

MULTIPURPOSE APPLICATIONS

p = 5 mm

PRODUCT CODE: R79

MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

Note: p (pitch) in mm.

Not for new design. Use new F461-F464 Series.

09/2008 138

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

R79

MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

MULTIPURPOSE APPLICATIONS

p = 5 mm

PRODUCT CODE: R79

Note: p (pitch) in mm.

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –

and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.

Not for new design. Use new F461-F464 Series.

Digitally signed by Marcy Brand

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com

Date: 2012.07.18 12:12:33 -04'00'