Data SheetData Sheet
EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the
information contained therein without EPCOS’ prior express consent is prohibited.
Inductors
Sample kits
Date: March 2008
203/08
Please read Cautions and warnings and
Important notes at the end of this document.
Whether for design-ins, testing or finding your way around – in daily development chores a ready
accessible selection of samples is essential. We’ve composed a number of handy sample kits for
you with the most common ratings.
Why not try them out?
Sample kit Type Inductance ratings Ordering code
SMT inductors
SIMID 0603-C nH
1.5 / 1.8 / 2.2 / 2.7 / 3.3 / 3.9 / 4.7 /
5.6 / 6.8 / 8.2 / 10 / 12 / 15 / 18 / 22 /
27 / 33 / 39 / 47 / 56 / 68 / 82 / 100 /
220
B82496X001
SIMID 0805-F nH
2.7 / 5.6 / 6.8 / 8.2 / 10 / 12 / 15 / 18 /
22 / 27 / 33 / 39 / 47 / 56 / 68 / 82 /
100 / 120 / 150 / 220 / 330 / 470 /
680 / 820
B82498X001
SIMID 1210-T µH
0.015 / 0.022 / 0.033 / 0.047 /
0.068 / 0.10 / 0.15 / 0.22 / 0.33 /
0.47 / 0.68 / 1.0 / 1.5 / 2.2 / 3.3 / 4.7 /
6.8 / 10 / 15 / 22 / 33 / 47 / 68 / 100
B82422X001
Sample kits
Sample kits
303/08
Please read Cautions and warnings and
Important notes at the end of this document.
SIMID 1210-100 µH
0.015 / 0.022 / 0.033 / 0.047 /
0.068 / 0.10 / 0.15 / 0.22 / 0.33 /
0.47 / 0.68 / 1.0 / 1.5 / 2.2 / 3.3 / 4.7 /
6.8 / 10 / 15 / 22 / 33 / 47 / 68 / 100
B82422X100
SIMID 1210-H µH
0.10 / 0.15 / 0.22 / 0.33 / 0.47 / 0.68 /
1 / 1.5 / 2.2 / 3.3 / 4.7 / 6.8 / 10 / 15 /
22 / 33 / 47 / 68 / 100 / 150 / 220 /
330 / 470 / 680
B82422X002
SIMID 1812-T µH
1 / 1.5 / 1.8 / 2.2 / 3.3 / 3.9 / 4.7 / 6.8 /
8.2 / 10 / 15 / 18 / 22 / 33 / 39 / 47 /
68 / 100 / 150 / 220 / 330 / 470 /
680 / 1000
B82432X001
SIMID 1812-C µH
1 / 1.5 / 1.8 / 2.2 / 3.3 / 3.9 / 4.7 / 6.8 /
8.2 / 10 15 / 18 / 22 / 33 / 39 / 47 /
68 / 100 / 150 / 220 / 330 / 470 /
680 / 1000
B82432X002
SIMID 2220-A
SIMID 2220-H
µH
1 / 4.7 / 10 / 47 / 100 / 470 / 1000 /
4700 / 10 000
High-current values:
330 / 1000
B82442X001
SMT power inductors
B82462A4
B82462G4
µH
1 / 1.5 / 2.2 / 3.3 / 4.7 / 6.8 / 10 / 15 /
22 / 33 / 47 / 68 / 100 / 150 / 220 /
330
B82462X004
B82464A4
B82464G4
µH
1 / 1.5 / 2.2 / 3.3 / 4.7 / 6.8 / 10 / 15 /
22 / 33 / 47 / 68 / 100 / 220 / 470 /
1000
B82464X004
B82471A1/473A1/475A1;
B82472G4/G6;
B82476A1; B82477G2/G4;
B82479A1/G1
µH
10 / 22 / 47 / 100 / 220
B8247XX001
Sample kit Type Inductance ratings Ordering code
Sample kits
Sample kits
403/08
Please read Cautions and warnings and
Important notes at the end of this document.
B82559*A013 µH
0.5 / 0.95 / 1.1 / 1.4 / 2.2 / 2.4 / 3.0 /
3.9
B82559X001
B82559*A025 0.44 / 1.25 / 2.3 / 2.9 / 4.35 / 6.1 /
7.9 / 10
B82559X002
Chokes for data and signal lines
B82789C0*/S0*
CAN bus double choke
µH
11 / 22 / 51 / 100
B82789X001
B82799
CAN bus double choke
µH
11 / 22 / 33 / 51 / 100 / 220 / 330 /
470
B82799X001
B82793C0*/S0*
Double choke
(open design)
µH
11 / 25 / 51 / 470 / 1000 / 2200 /
4700
B82793X001
B82790C0*/S0*
Double choke
(closed design)
µH
11 / 25 / 51 / 470 / 1000 / 2200 /
4700
B82790X001
Chokes for power lines
B82731M
D core choke
mH
3.3 / 6.8 / 10 / 15 / 27 / 39 / 47
B82731X001
B82731T
E core choke
mH
3.3 / 6.8 / 10 / 15 / 27 / 39 / 47 / 68 /
100
B82731X002
Sample kit Type Inductance ratings Ordering code
Sample kits
Sample kits
503/08
Cautions and warnings
■Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
603/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
