RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0C to +70C (see footnote) Industrial operating temp: -40C to +85C (see footnote) Electrical Specifications @ 25C Part Number AR1007-1000_ OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.1 Turns Ratio chip: cable (3%) 1CT:1CT Return Loss (dB Min) 30.1-60MHz 18-20*log(f/30) 0.5-30MHz 18 60.1-80MHz 12 Electrical Specifications @ 25C Part Number EMI Fingers LED (L/R) AR1007-1000_ NO NO Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) *Complete part number by inserting "S" for Standard Temp. or "I" for Industrial Temp. CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: 0.25 in mm AR1007-1000_ 15.90 3.5 13.50 21.60 Max 3.05 2.54 8.89 ALLIED AR1007-1000_ YYWW P1 P8 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/07/11 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS, TAB DOWN SCHEMATICS AR1007-1000_ 1CT:1CT 1CT:1CT C1 Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decouping Capacitor. PCB LAYOUT Unless otherwise specified all tolerances are: 0.05 in mm 2. 54 AR1007-1000_ 3. 05 8. 89 2.54 1. 27 11.43 15. 49 MATERIALS AR1007-1000_ Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u"Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/07/11 www.alliedcomponents.com