Detector Switches/ESE18 ESE18 Detector Switches Type: ESE18 Features Recommended Applications Thin body: 1.2 mm Circuit type: Normally-open and normally-closed types are available. Travel: Standard stroke type: 1.5 mm Long stroke type: 2.15 mm Surface mounted type: Packed with embossed tape. Supports reflow soldering. Detection of media in portable electronic equipment (Mobile phones/CD-ROM/DVD players, Digital still cameras) Explanation of Part Numbers 1 2 3 4 5 6 8 9 Design No Product Code 6th L R 7 Type Left-side operation type Right-side operation type Rating 50 A 3 V DC to 10 mA 5 V DC (Resistive load) 50 0 m max. (Initial) Contact Resistance Insulation Resistance 100 M min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 3 0 0 m N m a x. Mounting Height 1.2 mm Poles and Throws Full Travel (Pushing distance) 1-pole 1-throw * Standard stroke type With boss : 1.4 mm (1.5 mm) Without boss : 2.1 mm (1.5 mm) Operating Life Temperature Range * Long stroke type With boss : 1.4 mm (2.15 mm) Without boss : 2.1 mm (2.15 mm) 50 ,00 0 cycles min. -10 C to +60 C (Standard), -40 C to +85 C (Automotive) +70 C for 9 6 hours Heat Resistance -25 C for 9 6 hours Low Temperature Resistance Humidity Resistance +40 C 9 0 % to 95 % RH for 9 6 hours Minimum Quantity/Packing Unit 5,00 0 pcs. Embossed Taping (Reel Pack) Quantity/Carton 30 ,0 0 0 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.06 industrial.panasonic.com/ac/e/ -1- Panasonic Corporation 2017 ANCTB49E 201706-Fd Detector Switches/ESE18 Dimensions in mm (not to scale) 0.5 (14 R0. 3 0.25 1.15 (52 3.0 3.8 Pivot center Case center Dummy terminal 0.25 0.25 0.4 Pivot center 1.8 3.6 0.5 2.7 4.0 PWB mounting hole for reference (Pitch tolerance: 0.05) Standard stroke type ESE18L Straight terminals 1-pole 1-throw ON angular terminal OFF angular terminal .7) (14 2.6 max. 65 0. R0.3 Ac t i on 5.4 3.2 0.54 0.25 1.15 Dummy terminal 3.0 4.1 Case center 1.2 0.7 0.5 0.5 (2.0) 1.4 1.0 0.5 0.7 (Pivot center) 0.25 0.4 Operation point Normal closed without Boss ESE18L61C ON start position OFF start position Pivot center 0.75 3.4 2.00.1 Normal closed with Boss ESE18L61D 2.9 2.6 0.60.05 (1.2) 1.0 Full stroke position Normal open without Boss ESE18L11C dir ec t (5 2. 4 ) n io ON start position OFF start position Normal open with Boss ESE18L11D 0.54 1.2 (2) ON start position OFF start position 0.5 1.20.2 No. 2 5.4 3.2 ON start position OFF start position 0.75 0.7 0.7 0.5 3.4 2.00.1 .7) 2.6 max. 5 0.6 n 1.4 1.0 0.60.05 Normal closed with Boss ESE18L61B Act io (1.2) 1.0 tio .4 ) nd ire c Operation point Full stroke position Normal open without Boss ESE18L11A Normal closed without Boss ESE18L61A 0.25 ON angular terminal OFF angular terminal 2.9 Normal open with Boss ESE18L11B Standard stroke type ESE18L J-bent terminals 1-pole 1-throw 2.6 No. 1 0.5 2.7 4.0 1.20.2 1.8 3.6 PWB mounting hole for reference (Pitch tolerance: 0.05) ) .7 (14 ON start position OFF start position R0 .3 (52 .4 (3.2) 65 0. 5.4 3.2 0.54 0.5 1.20.2 1.15 0.5 2.7 4.0 3.0 3.8 Case center 1.2 0.7 0.5 0.75 (Pivot center) 0.7 1.4 1.0 0.25 Pivot center Full stroke position 0.25 0.4 Operation point 0.60.05 0.25 3.4 2.00.1 Normal closed with Boss ESE18L62B ) (1.2) 1.0 Normal open without Boss ESE18L12A Normal closed without Boss ESE18L62A 0.5 OFF angular terminal 3.55 3.1 (2.0) Normal open with Boss ESE18L12B 0.25 Long stroke type ESE18L J-bent terminals ON angular terminal 1-pole 1-throw ON start position OFF start position No. 3 1.8 3.6 PWB mounting hole for reference (Pitch tolerance: 0.05) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -2- Panasonic Corporation 2017 ANCTB49E 201706-Fd Detector Switches/ESE18 Dimensions in mm (not to scale) No. 4 Long stroke type ESE18L Straight terminals Normal open 1-pole 1-throw ON angular terminal OFF angular terminal with Boss ESE18L12D .3 (5 2.4 ) 5.4 3.2 R0 0.54 0.25 1.15 1.4 1.0 0.5 1.20.2 0.5 2.7 4.0 3.0 4.1 Case center 1.2 Full stroke position 0.25 0.4 ON start position OFF start position Pivot center ON start position OFF start position Operation point 3.4 2.00.1 Normal closed with Boss ESE18L62D 3.55 3.1 (2.0) 0.60.05 (1.2) 1.0 0.75 (Pivot center) 0.7 0.7 0.5 Normal open without Boss ESE18L12C Normal closed without Boss ESE18L62C ) .7 (3.2) 65 0. (14 1.8 3.6 PWB mounting hole for reference (Pitch tolerance: 0.05) Standard stroke type ESE18R J-bent terminals Normal open 1-pole 1-throw No. 5 0.25 with Boss ESE18R11B 0.5 ON angular terminal OFF angular terminal 0.25 1.15 3.0 3.8 0.75 0.7 0.7 0.5 Pivot center 1.2 1.0 2.6 (2) 1.4 2.9 0.60.05 5.4 3.2 ion irect ) 3.4 2.00.1 nd tio Ac Full stroke position 0.54 .4 Normal closed with Boss ESE18R61B R0.3 Operation point (1.2) 1.0 Normal closed without Boss ESE18R61A (14 .7 ) 2.6 max. 0.6 5 ON start position OFF start position (52 Normal open without Boss ESE18R11A Case center Pivot center 0.25 Dummy terminal 0.25 0.4 0.5 1.20.2 No. 6 Normal open with Boss ESE18R11D 1.8 3.6 0.5 2.7 4.0 PWB mounting hole for reference (Pitch tolerance: 0.05) Standard stroke type ESE18R Straight terminals 1-pole 1-throw ON angular terminal OFF angular terminal (14 .7 5.4 3.2 0.25 1.15 1.4 1.0 0.5 2.7 4.0 3.0 4.1 Dummy terminal Case center 1.2 0.5 0.75 0.7 (Pivot center) 0.7 0.5 0.5 Full stroke position (2.0) Operation point 2.9 2.6 ON start position OFF start position 0.60.05 Pivot center ction dire 3.4 2.00.1 n tio Ac ) 4 0.25 0.4 0.54 2. Normal closed without Boss ESE18R61C (1.2) 1.0 ) (5 Normal closed with Boss ESE18R61D ON start position OFF start position 2.6 max. 0. 65 R0.3 Normal open without Boss ESE18R11C 1.8 3.6 1.20.2 PWB mounting hole for reference (Pitch tolerance: 0.05) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -3- Panasonic Corporation 2017 ANCTB49E 201706-Fd Detector Switches/ESE18 Dimensions in mm (not to scale) 0.5 (14 Case center Dummy terminal 0.5 2.7 4.0 0.5 1.2 0.2 1.8 3.6 PWB mounting hole for reference (Pitch tolerance: 0.05) Long stroke type ESE18R Straight terminals 1-pole 1-throw ON angular terminal OFF angular terminal (14 .7 ON start position OFF start position Pivot center 0.25 1.15 Dummy terminal 0.5 2.7 4.0 1.20.2 3.0 4.1 Case center 1.2 0.5 0.75 0.7 0.7 0.5 0.5 (Pivot center) 0.60.05 5.4 3.2 ) 3.4 2.00.1 .3 0.25 0.4 0.54 .4 R0 1.0 Normal closed with Boss ESE18R62D ) (3.2) 0. 65 (52 (1.2) Normal open without Boss ESE18R12C Normal closed without Boss ESE18R62C 3.0 3.8 0.75 0.7 0.7 0.5 1.2 Pivot center Pivot center 0.25 0.4 5.4 3.2 0.25 1.15 0.54 3.55 3.1 (2.0) 1.4 1.0 0.60.05 2.00.1 3.4 0.25 ) .4 Full stroke position ) (3.2) 0. 65 (52 Operation point R0 Normal closed without Boss ESE18R62A .7 .3 (1.2) 1.0 Normal closed with Boss ESE18R62B Normal open with Boss ESE18R12D ON angular terminal OFF angular terminal ON start position OFF start position Normal open without Boss ESE18R12A No. 8 0.25 3.55 3.1 (2.0) 1.4 1.0 Normal open with Boss ESE18R12B Long stroke type ESE18R J-bent terminals 1-pole 1-throw ON start position OFF start position Operation point Full stroke position No. 7 1.8 3.6 PWB mounting hole for reference (Pitch tolerance: 0.05) Circuit Diagram Normal open type 1-pole 1-throw (N . O) Type ESE18L Type ESE18R Dummy Dummy Dummy Common C terminal Dummy C Normal closed type 1-pole 1-throw (N . C) Type ESE18L Common terminal Type ESE18R Dummy Dummy Dummy Common C terminal Dummy C Common terminal Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -4- Panasonic Corporation 2017 ANCTB49E 201706-Fd Detector Switches/ESE18 Standard Reel Dimensions in mm (not to scale) Standard stroke type Long stroke type Taping Reel 16.4 13.5 16.00.3 P=8.00.1 Drawing direction 4.00.1 TOP 2.00.1 Leading portion 400 mm min. Pilot holes .1 +0 0 END Carrier tape .5 1 7.50.1 1.750.1 380.02.0 Embossed Carrier Taping Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -5- Panasonic Corporation 2017 ANCTB49E 201706-Fd