Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 167/184 series radial lead metallized polyester box capacitors are available in bulk (Type 167) or on ammo pack or radial tape and reel (Type 184). These capacitors are constructed in rugged rectangular plastic cases and all come with 7.5 mm (0.3") lead spacing. They are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights * * * * * * Rugged plastic case Case and epoxy fill meets UL94V0 7.5 mm (0.3") lead spacing Bulk, tape and reel or ammo pack Non-inductively wound Non-polar Specifications Capacitance Range 0.001 F to 10.0 F Capacitance Tolerance 5%, 10%, 20% Rated Voltage 63 to 630 Vdc Operating Temperature Range -55 C to +125 C (with 50% Vdc derating >85 C) Dielectric Withstand Voltage 1.6 x rated voltage for 2 s @ +25 C 5 C Dissipation Factor @ 120 Hz, +25 C tg x 10-4 at +25 C 5 C Total Self Inductance (L) Maximum Pulse Rise Time (dv/dt) kHz tand x 10-4 1 100 10 150 Approximately 8 nH Vn V/s 63 12 100 20 250 32 400 41 630 70 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. Long Term Stability (after two years) Storage Standard Environmental Conditions Performance Capacitance Change C/C 3% RoHS Compliant CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Capacitor Outline Drawing Test Method and Performance Insulation Resistance T L Max Test Conditions Temperature Voltage Charge Time Voltage Charge Max H Max Performance For Vn > 100 Vdc For Vn 100 Vdc .217 .039 (5.5 1.0 mm) S .015 (0.4 mm) Lead length shown is as supplied on 167 Series Soldering 260 C 5 C 10 sec 1 sec Test Conditions Temperature Test Duration Voltage Applied Performance Capacitance Change C/C DF Change tg Insulation Resistance 2% 30 x 10-4 at 10 kHz limit value Ratings Cap (F) Catalog Part Number Tape & Reel Ammo Pack 30,000 M (50,000 M typical) 10,000 M for C 0.1F 1,000 M x F for > 0.1F Damp Heat Test Test Conditions Temperature Relative Humidity Test Duration Performance Capacitance Change C/C DF Change tg Insulation Resistance Od .003 (0.076) Test Conditions Soldering Temperature Soldering Duration Performance Capacitance Change C/C DF Change tg Insulation Resistance 25 C 5 C 1 minute 50 Vdc for Vn < 100 Vdc 100 Vdc for Vn 100 Vdc +40 C 95% 21 days 5% 50 x 104 at 1 kHz 50% of limit value Life Test +85 C 1000 hrs 1.25 x Vn 5% 30 x 10-4 at 10 kHz 50% of limit value Inches L T H Millimeters S Od L T H S Od 63 Vdc .068 167683*63A-F 184683*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*63A-F 184104*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .15 167154*63A-F 184154*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .22 167224*63A-F 184224*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .27 167274*63A-F 184274*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .33 167334*63A-F 184334*63#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .47 167474*63B-F 184474*63#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .68 167684*63C-F 184684*63#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 1.00 167105*63C-F 184105*63#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 100 Vdc .033 167333*100A-F 184333*100#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .047 167473*100A-F 184473*100#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .068 167683*100A-F 184683*100#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*100A-F 184104*100#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .12 167124*100B-F 184124*100#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .15 167154*100B-F 184154*100#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .22 167224*100C-F 184224*100#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .33 167334*100C-F 184334*100#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 * Indicates capacitance tolerance: J = 5%, K = 10%, M = 20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications) CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Cap (F) Catalog Part Number Inches Tape & Reel Ammo Pack L T H Millimeters S Od L T H S Od 250 Vdc .010 167103*250A-F 184103*250#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .015 167153*250A-F 184153*250#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .018 167183*250A-F 184183*250#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .022 167223*250A-F 184223*250#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .027 167273*250B-F 184273*250#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .033 167333*250B-F 184333*250#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .039 167393*250B-F 184393*250#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .047 167473*250B-F 184473*250#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .068 167683*250C-F 184683*250#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .100 167104*250C-F 184104*250#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .0047 167472*400A-F 184472*400#A>-F 0.413 0.138 0.295 0.024 10.5 3.5 7.0 7.5 0.6 400 Vdc 0.276 .0056 167562*400A-F 184562*400#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0068 167682*400A-F 184682*400#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .010 167103*400A-F 184103*400#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .015 167153*400B-F 184153*400#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .022 167223*400C-F 184223*400#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .033 167333*400C-F 184333*400#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 630 Vdc .0010 167102*630A-F 184102*630#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0015 167152*630A-F 184152*630#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0022 167222*630A-F 184222*630#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0033 167332*630A-F 184332*630#A>-F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0047 167472*630B-F 184472*630#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .0068 167682*630B-F 184682*630#B>-F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .010 167103*630C-F 184103*630#C>-F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .015 167153*630D-F 184153*630#D>-F 0.413 0.236 0.472 0.295 0.024 10.5 6.0 12.0 7.5 0.6 * Indicates capacitance tolerance: J = 5%, K = 10%, M = 20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specification) Part Numbering System for Bulk Items 167 Series 167 104 Capacitance K Tolerance A -F Case RoHS Voltage Code Compliant 63 = 63 Vdc A Designator K = 10% 100 = 100 Vdc B M = 20% 250 = 250 Vdc C 630 = 630 Vdc D 392 = .0039 F J = 5% 103 = .01 F 104 = .1 F 105 = 1.0 F 100 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Tape Specification - 7.5 mm Lead Spacing 30 mm 1.18" Reel Packing H P1 331 mm 13.04" Ammo Box Packing P Po 280 mm Max 11.02" Wo W W1 H W2 Od Do 47 mm Max 1.85" Item Code Lead-Wire Diameter Od Millimeters 0.6+0.04 -0.01 Inches .024.001 Lead-to-Lead Distance P 7.5+0.6 -0.2 .295+.024 -.040 Feed Hole Pitch P0 2.70.3 .5.012 Pitch of Component P1 12.71.0 .5.039 Hole Center to Lead P2 3.750.7 .148.028 Component Alignment, F-R h 02.0 0.079 Tape Width W 18+1.0 -0.1 .709+.039 -.004 Hold-down Tape Width W0 6.0 min .236 min Hole Position W1 9.0 .355+.030 -.001 Hold-down Tape Position W2 3.0 Max .118 Max Height of Component H +0.75 -0.05 > 335 mm Max 13.19" Case Quantity Quantity Code Reeled Ammo Pack A 1800 1500 B 1500 1500 C 1200 1000 D 1000 1000 > The H dimension depends on the insertion equipment used. Specify the proper tooling code as indicated below. Tooling Millimeters Inches A 16.50.75 .679.030 B 18.50.75 .728.030 C 16.0 .630030 > from Tape Center Feed Hole Diameter D0 4.00.3 H Dimensions Code .157.012 0.75 Part Numbering System for Auto Insertion 184 104 K 100 R A Packaging Series Capacitance 184 392 = .0039 F Tolerance J = 5% B -F *Tooling RoHS Type Case Code Compliant Voltage (#) Code (>) Designator 63 = 63 Vdc A = Ammo A A R = Tape & Reel 103 = .01 F K = 10% 100 = 100 Vdc B B 104 = .1 F M = 20% 250 = 250 Vdc C C 630 = 630 Vdc D 105 = 1.0 F * Tooling code is at the discretion of the user depending on the insertion equipment being used. See table for specific "H" dimensions * Tooling code (>) depends on the users insertion equipment requirements. See table for available options. CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com