05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM 500 WATT MULTI-LINE TVS ARRAY Description The SMDAxx and SMDAxxC Series are multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The SMDA Series has a peak pulse power rating of 500 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 package Features applications * Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV * Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns * Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(LineGnd) & Level 2(Line-Line) * 500 Watts Peak Pulse Power per Line (tp = 8/20s) * Unidirectional and Bidirectional Configurations * Available in Multiple Voltages Ranging from 3V to 36V * Protects up to Four Lines * RoHS Compliant * REACH Compliant * * * * * * RS-232, RS-422 & RS-423 Data Lines SMART Phones Audio/Video Inputs Portable Electronics Wireless Network Systems Medical Electronics Mechanical characteristics * Molded JEDEC SO-8 Package * Approximate Weight: 70 milligrams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 12mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATIONS 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 UNIDIRECTIONAL 05031.R11 10/12 BIDIRECTIONAL Page 1 www.protekdevices.com 05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 C Storage Temperature TSTG -55 to 150 C Peak Pulse Power (tp = 8/20s) - See Figure 1 PPP 500 Watts Forward Voltage @ 100mA, 300s - Square Wave (See Note 1) VF 1.5 Volts Operating Temperature Note 1. Only applies to unidirectional devices. ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Note 1) DEVICE MARKING RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CURRENT MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE VWM VOLTS @1mA V(BR) VOLTS @I P = 1A VC VOLTS @I P = 5A VC VOLTS I PP @ 8/20s AMPS @V WM ID A @0V, 1MHz C pF SMDA03 SDL 3.3 4.0 6.5 7.0 43.0 125 800 SMDA03C SDM 3.3 4.5 7.0 9.0 43.0 125 450 SMDA05 SDA 5.0 6.0 9.8 10.0 40.0 20 550 SMDA05C SDB 5.0 6.0 9.8 10.0 40.0 20 308 SMDA08 SDJ 8.0 8.5 13.4 14.0 27.0 10 500 SMDA08C SDK 8.0 8.5 13.4 14.0 27.0 10 300 SMDA12 SDC 12.0 13.3 19.0 22.0 20.0 1 185 SMDA12C SDD 12.0 13.3 19.0 22.0 20.0 1 105 SMDA15 SDE 15.0 16.7 24.0 27.0 15.0 1 140 SMDA15C SDF 15.0 16.7 24.0 27.0 15.0 1 80 SMDA24 SDG 24.0 26.7 43.0 45.0 12.0 1 88 SMDA24C SDH 24.0 26.7 43.0 45.0 12.0 1 50 SMDA36 SDN 36.0 40.0 51.0 65.0 8.0 1 80 SMDA36C SDP 36.0 40.0 51.0 65.0 8.0 1 45 Notes 1. Part numbers with a "C" suffix are bidirectional devices, i.e., SMDA03C. 05031.R11 10/12 Page 2 www.protekdevices.com 05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20s Waveform 100 10 0.1 10 100 td - Pulse Duration - s Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20s 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05031.R11 10/12 5 10 15 t - Time - s 20 25 30 Page 3 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - C 150 www.protekdevices.com 05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM SO-8 package information outline dimensions dim millimeters -A- inches min max min max A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45 C 0.05 BSC J + 0.010" (0.25mm) M B M 4 PL P 0 - 10 -T- K + 0.010" (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions "A" and "B" are datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters B inches min max min max A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05031.R11 10/12 D C E Page 4 www.protekdevices.com 05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape 0.2 P2 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13" Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06009.R3 9/10. ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty SMDAxx/SMDAxxC -LF -T7 1,000 7" 98 SMDAxx/SMDAxxC -LF -T13 2,500 13" 98 This device is only available in a Lead-Free configuration. 05031.R11 10/12 Page 5 www.protekdevices.com 05031 SMDA03 - SMDA36C Only One Name Means ProTek'TionTM company information COMPANY PROFILE In business more than 20 years, ProTek DevicesTM is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT (c) ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05031.R11 10/12 Page 6 www.protekdevices.com