This specification documents the detailed requirements for Analog Devices space qualified die including die qualification as described for Class K in MIL-PRF-38534, Appendix C, Table C-II except as modified herein. The manufacturing flow described in the STANDARD DIE PRODUCTS PROGRAM brochure at http://www.analog.com/marketSolutions/militaryAerospace/pdf/Die_Broc.pdf is to be considered a part of this specification. This data sheet specifically details the space grade version of this product. A more detailed operational description and a complete data sheet for commercial product grades can be found at www.analog.com/PM139 Part Number The complete part number(s) of this specification follow: Description PM139-000C Quad Low-Power Voltage Comparator PM139R000C Quad Low-Power Voltage Comparator with Radiation Guarantee Supply Voltage Range ...................................................... 36V dc or 18V dc Input Voltage Range ......................................................... -0.3V dc to 36V dc Input Current (VIN < -0.3V) ................................................ 50mA Sink Current ...................................................................... 20mA approximately Storage Temperature ........................................................ -65C to +150C Ambient Operating Temperature Range ........................... -55C to +125C Junction Temperature (TJ).............................................150C Absolute Maximum Ratings Notes: 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. In accordance with class-K version of MIL-PRF-38534, Appendix C, Table C-II, except as modified herein. (a) Qual Samples Size and Qual Acceptance Criteria - 25/2 (b) Qual Sample Package - DIP (c) Pre-screen electrical test over temperature performed post-assembly prior to die qualification. Table I Notes: 1/ V+ = +5V, V- = 0V, VO = 1.4V, VIN = 0V, and TA = 25C, unless otherwise specified. Table II Notes: 1/ V+ = +5V, V- = 0V, VO = 1.4V, and VIN = 0V, unless otherwise specified. 2/ Post 100Krad limit 3/ Not tested post irradiation. 5.1 HTRB is not applicable for this drawing. 5.2 Burn-in is per MIL-STD-883 Method 1015 test condition B or C. 5.3 Steady state life test is per MIL-STD-883 Method 1005.