This specification documents the detailed requirements for Analog Devices space qualified die including die
qualification as described for Class K in MIL-PRF-38534, Appendix C, Table C-II except as modified herein.
The manufacturing flow described in the STANDARD DIE PRODUCTS PROGRAM brochure at
http://www.analog.com/marketSolutions/militaryAerospace/pdf/Die_Broc.pdf is to be considered a part of this
specification.
This data sheet specifically details the space grade version of this product. A more detailed operational
description and a complete data sheet for commercial product grades can be found at
www.analog.com/PM139
The complete part number(s) of this specification follow:
Part Number Description
PM139-000C Quad Low-Power Voltage Comparator
PM139R000C Quad Low-Power Voltage Comparator with Radiation Guarantee
Supply Voltage Range ...................................................... 36V dc or ±18V dc
Input Voltage Range ......................................................... -0.3V dc to 36V dc
Input Current (VIN < -0.3V) ................................................ 50mA
Sink Current ...................................................................... 20mA approximately
Storage Temperature ........................................................ -65°C to +150°C
Ambient Operating Temperature Range ........................... -55°C to +125°C
Junction Temperature (TJ)………………………….….……....150°C
Absolute Maximum Ratings Notes:
1/ Stresses above the absolute maximum rating may cause permanent damage to the device.
Extended operation at the maximum levels may degrade performance and affect reliability.
In accordance with class-K version of MIL-PRF-38534, Appendix C, Table C-II, except as modified herein.
(a) Qual Samples Size and Qual Acceptance Criteria – 25/2
(b) Qual Sample Package – DIP
(c) Pre-screen electrical test over temperature performed post-assembly prior to die qualification.
Table I Notes:
1/ V+ = +5V, V- = 0V, VO = 1.4V, VIN = 0V, and TA = 25°C, unless otherwise specified.
Table II Notes:
1/ V+ = +5V, V- = 0V, VO = 1.4V, and VIN = 0V, unless otherwise specified.
2/ Post 100Krad limit
3/ Not tested post irradiation.
5.1 HTRB is not applicable for this drawing.
5.2 Burn-in is per MIL-STD-883 Method 1015 test condition B or C.
5.3 Steady state life test is per MIL-STD-883 Method 1005.
