Philips Semiconductors Product specification N-channel TrenchMOS transistor FEATURES PSMN025-100D SYMBOL QUICK REFERENCE DATA * 'Trench' technology * Very low on-state resistance * Fast switching * Low thermal resistance d VDSS = 100 V ID = 47 A g RDS(ON) 25 m s GENERAL DESCRIPTION SiliconMAX products use the latest Philips Trench technology to achieve the lowest possible on-state resistance in each package at each voltage rating. Applications:* d.c. to d.c. converters * switched mode power supplies PINNING PIN SOT428 (DPAK) DESCRIPTION 1 gate 2 drain1 3 source tab 2 tab drain 1 3 The PSMN025-100D is supplied in the SOT428 (Dpak) surface mounting package. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER VDSS VDGR VGS ID Drain-source voltage Drain-gate voltage Gate-source voltage Continuous drain current IDM PD Tj, Tstg Pulsed drain current Total power dissipation Operating junction and storage temperature CONDITIONS MIN. MAX. UNIT Tj = 25 C to 175C Tj = 25 C to 175C; RGS = 20 k - 55 100 100 20 47 33 188 150 175 V V V A A A W C Tmb = 25 C; VGS = 10 V Tmb = 100 C; VGS = 10 V Tmb = 25 C Tmb = 25 C 1 It is not possible to make connection to pin 2 of the SOT428 package. August 1999 1 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D AVALANCHE ENERGY LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS EAS Non-repetitive avalanche energy Unclamped inductive load, IAS = 40 A; tp = 100 s; Tj prior to avalanche = 25C; VDD 25 V; RGS = 50 ; VGS = 10 V; refer to fig:15 IAS Non-repetitive avalanche current MIN. MAX. UNIT - 260 mJ - 47 A THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Rth j-a Thermal resistance junction to mounting base Thermal resistance junction to ambient CONDITIONS MIN. SOT428 package, pcb mounted, minimum footprint TYP. MAX. UNIT - - 1 K/W - 50 - K/W ELECTRICAL CHARACTERISTICS Tj= 25C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS VGS = 0 V; ID = 0.25 mA; VGS(TO) Drain-source breakdown voltage Gate threshold voltage Tj = -55C VDS = VGS; ID = 1 mA Tj = 175C Tj = -55C RDS(ON) IGSS IDSS Drain-source on-state VGS = 10 V; ID = 25 A resistance Gate source leakage current VGS = 10 V; VDS = 0 V Zero gate voltage drain VDS = 100 V; VGS = 0 V; current Tj = 175C Tj = 175C MIN. TYP. MAX. UNIT 100 89 2 1 - 3 22 0.02 0.05 - 4 6 25 68 100 10 500 V V V V V m m nA A A Qg(tot) Qgs Qgd Total gate charge Gate-source charge Gate-drain (Miller) charge ID = 45 A; VDD = 80 V; VGS = 10 V - 61 13 25 - nC nC nC td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 50 V; RD = 1.8 ; VGS = 10 V; RG = 5.6 Resistive load - 18 72 69 58 - ns ns ns ns Ld Ls Internal drain inductance Internal source inductance Measured tab to centre of die Measured from source lead to source bond pad - 3.5 7.5 - nH nH Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 2600 340 195 - pF pF pF August 1999 2 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25C unless otherwise specified SYMBOL PARAMETER IS VSD Continuous source current (body diode) Pulsed source current (body diode) Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge ISM August 1999 CONDITIONS MIN. TYP. MAX. UNIT - - 47 A - - 188 A IF = 25 A; VGS = 0 V - 0.87 1.2 V IF = 20 A; -dIF/dt = 100 A/s; VGS = 0 V; VR = 25 V - 82 0.26 - ns C 3 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D Normalised Power Derating, PD (%) Transient thermal impedance, Zth j-mb (K/W) 1 100 D = 0.5 90 0.2 80 0.1 0.1 70 0.05 60 0.02 50 40 P D 0.01 30 D = tp/T tp single pulse 20 T 10 0.001 1E-06 0 0 25 50 75 100 125 Mounting Base temperature, Tmb (C) 150 175 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 Pulse width, tp (s) Fig.1. Normalised power dissipation. PD% = 100PD/PD 25 C = f(Tmb) Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T Drain Current, ID (A) 40 Normalised Current Derating, ID (%) VGS = 10V 100 35 90 8V Tj = 25 C 6V 30 80 70 25 60 5V 50 20 40 15 4.8 V 10 4.6 V 30 20 10 4.4 V 5 4.2 V 4V 0 0 25 50 75 100 125 Mounting Base temperature, Tmb (C) 150 0 175 0 Fig.2. Normalised continuous drain current. ID% = 100ID/ID 25 C = f(Tmb); VGS 10 V 0.4 0.16 tp = 10 us 1.8 2 4.6 V Tj = 25 C 4.8 V 0.12 100 us D.C. 4.4 V 4V 0.14 10 1.6 Drain-Source On Resistance, RDS(on) (Ohms) 4.2 V RDS(on) = VDS/ ID 100 0.6 0.8 1 1.2 1.4 Drain-Source Voltage, VDS (V) Fig.5. Typical output characteristics, Tj = 25 C. ID = f(VDS) Peak Pulsed Drain Current, IDM (A) 1000 0.2 5V 0.1 1 ms 0.08 10 ms 0.06 100 ms 1 0.04 8V 6V 0.02 VGS = 10V 0.1 0 1 10 100 Drain-Source Voltage, VDS (V) 1000 0 Fig.3. Safe operating area ID & IDM = f(VDS); IDM single pulse; parameter tp August 1999 2 4 6 8 10 12 Drain Current, ID (A) 14 16 18 20 Fig.6. Typical on-state resistance, Tj = 25 C. RDS(ON) = f(ID) 4 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D Drain current, ID (A) 4.5 50 VDS > ID X RDS(ON) 45 Threshold Voltage, VGS(TO) (V) 4 40 3.5 35 3 30 maximum typical 2.5 25 minimum 2 20 1.5 15 175 C 10 Tj = 25 C 1 0.5 5 0 0 0 1 2 3 4 5 6 -60 -40 -20 Gate-source voltage, VGS (V) 0 20 40 60 80 100 120 140 160 180 Junction Temperature, Tj (C) Fig.7. Typical transfer characteristics. ID = f(VGS) Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS Transconductance, gfs (S) 50 Drain current, ID (A) 1.0E-01 VDS > ID X RDS(ON) 45 Tj = 25 C 40 1.0E-02 35 175 C 30 minimum 1.0E-03 25 typical 1.0E-04 20 maximum 15 1.0E-05 10 5 1.0E-06 0 0 5 10 15 20 25 30 35 Drain current, ID (A) 40 45 0 50 Fig.8. Typical transconductance, Tj = 25 C. gfs = f(ID) 0.5 1 1.5 2 2.5 3 3.5 Gate-source voltage, VGS (V) 4 4.5 5 Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 C Normalised On-state Resistance 2.9 2.7 2.5 2.3 2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5 10000 Capacitances, Ciss, Coss, Crss (pF) Ciss 1000 Coss 100 Crss 10 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Junction temperature, Tj (C) 0.1 Fig.9. Normalised drain-source on-state resistance. RDS(ON)/RDS(ON)25 C = f(Tj) August 1999 1 10 Drain-Source Voltage, VDS (V) 100 Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz 5 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D Maximum Avalanche Current, IAS (A) 100 Gate-source voltage, VGS (V) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ID = 45A Tj = 25 C VDD = 20 V 25 C VDD = 80 V 0 5 10 1 0.001 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 Gate charge, QG (nC) Tj prior to avalanche = 150 C 0.01 0.1 1 10 Avalanche time, tAV (ms) Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG) Fig.15. Maximum permissible non-repetitive avalanche current (IAS) versus avalanche time (tAV); unclamped inductive load Source-Drain Diode Current, IF (A) 50 VGS = 0 V 45 40 35 30 175 C 25 Tj = 25 C 20 15 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 Source-Drain Voltage, VSDS (V) Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj August 1999 6 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D MECHANICAL DATA Plastic single-ended surface mounted package (Philips version of D-PAK); 3 leads (one lead cropped) SOT428 seating plane y A E A2 A A1 b2 D1 mounting base E1 D HE L2 2 L1 L 1 3 b1 w M A b c e e1 0 10 20 mm scale DIMENSIONS (mm are the original dimensions) A UNIT max. mm 2.38 2.22 A1(1) A2 b b1 max. b2 c 0.65 0.45 0.89 0.71 0.89 0.71 1.1 0.9 5.36 5.26 0.4 0.2 D1 E D max. max. max. 6.22 5.98 4.81 4.45 6.73 6.47 E1 min. 4.0 e e1 2.285 4.57 HE max. L 10.4 9.6 2.95 2.55 L1 min. L2 w y max. 0.5 0.7 0.5 0.2 0.2 Note 1. Measured from heatsink back to lead. OUTLINE VERSION REFERENCES IEC JEDEC EIAJ SOT428 EUROPEAN PROJECTION ISSUE DATE 98-04-07 Fig.16. SOT428 surface mounting package. Centre pin connected to mounting base. Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to SMD Footprint Design and Soldering Guidelines, Data Handbook SC18. 3. Epoxy meets UL94 V0 at 1/8". August 1999 7 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D MOUNTING INSTRUCTIONS Dimensions in mm 7.0 7.0 2.15 1.5 2.5 4.57 Fig.17. SOT428 : soldering pattern for surface mounting. August 1999 8 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS transistor PSMN025-100D DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. August 1999 9 Rev 1.000 Select & Go... Go to Philips Semiconductors' home page Start part Catalog & Datasheets Information as of 2000-08-26 Catalog by Function Discrete semiconductors Audio Clocks and Watches Data communications Microcontrollers Peripherals Standard analog Video Wired communications Wireless communications PSMN025-100D; N-channel TrenchMOS transistor * Description * Features * Applications * Datasheet * Products, packages, availability and ordering * Find similar products * Support & tools Subscribe to eNews To be kept informed on PSMN025-100D, subscribe to eNews. * Catalog by System Automotive Consumer Multimedia Systems Communications PC/PC-peripherals Description SiliconMAX products use the latest Philips Trench technology to achieve the lowest possible on-state resistance in each package at each voltage rating. Cross reference Models The PSMN025-100D is supplied in the SOT428 (Dpak) surface mounting package. Packages Application notes Selection guides Features Other technical documentation End of Life information Datahandbook system l l l l 'Trench' technology Very low on-state resistance Fast switching Low thermal resistance Relevant Links About catalog tree About search About this site Subscribe to eNews Catalog & Datasheets Search PSMN025-100D PSMN025-100D Applications l l d.c. to d.c. converters switched mode power supplies Datasheet Type nr. Title PSMN025-100D N-channel TrenchMOS transistor Publication release date 01-Aug-99 Datasheet status Product Specification Page count 9 File size (kB) 95 Datasheet Download Products, packages, availability and ordering Partnumber North American Partnumber PSMN025100D Order code (12nc) 9340 558 03118 marking/packing package device status Standard Marking * Reel Pack, SMD, 13" SOT428 Full production buy online Find similar products: PSMN025-100D links to the similar products page containing an overview of products that are similar in function or related to the part number(s) as listed on this page. The similar products page includes products from the same catalog tree(s) , relevant selection guides and products from the same functional category. Support &tools Spice model of PSMN025-100D Copyright (c) 2000 Royal Philips Electronics All rights reserved. Terms and conditions.