MJD31 (NPN), MJD32 (PNP) Complementary Power Transistors DPAK For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. Features * * * * * * * Lead Formed for Surface Mount Applications in Plastic Sleeves Straight Lead Version in Plastic Sleeves ("1" Suffix) Lead Formed Version in 16 mm Tape and Reel ("T4" Suffix) Electrically Similar to Popular TIP31 and TIP32 Series Epoxy Meets UL 94, V-0 @ 0.125 in NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant MAXIMUM RATINGS Rating Collector-Emitter Voltage MJD31, MJD32 MJD31C, MJD32C Symbol Max Unit VCEO Emitter-Base Voltage VEB 5.0 Vdc COLLECTOR 2,4 1 BASE 1 BASE 3 EMITTER 3.0 Adc 5.0 Adc Base Current IB 1.0 Adc Total Power Dissipation @ TC = 25C Derate above 25C PD Total Power Dissipation @ TA = 25C Derate above 25C PD W W/C 15 0.12 4 4 1 2 3 -65 to + 150 C ESD - Human Body Model HBM 3B V ESD - Machine Model MM C V AYWW J3xxG DPAK A Y WW xx G THERMAL CHARACTERISTICS Symbol Max Unit RqJC 8.3 C/W Thermal Resistance, Junction-to-Ambient* RqJA 80 C/W TL 260 C 2 3 IPAK CASE 369D STYLE 1 MARKING DIAGRAMS Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Thermal Resistance, Junction-to-Case 1 DPAK CASE 369C STYLE 1 W W/C 1.56 0.012 TJ, Tstg Lead Temperature for Soldering Purposes 3 EMITTER Vdc IC Characteristic COLLECTOR 2,4 40 100 ICM Operating and Storage Junction Temperature Range COMPLEMENTARY Vdc VCB Collector Current - Peak SILICON POWER TRANSISTORS 3 AMPERES 40 AND 100 VOLTS 15 WATTS 40 100 Collector-Base Voltage MJD31, MJD32 MJD31C, MJD32C Collector Current - Continuous www.onsemi.com YWW J3xxG IPAK = Site Code = Year = Work Week = 1, 1C, 2, or 2C = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. *These ratings are applicable when surface mounted on the minimum pad sizes recommended. (c) Semiconductor Components Industries, LLC, 2016 September, 2016 - Rev. 16 1 Publication Order Number: MJD31/D MJD31 (NPN), MJD32 (PNP) ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Symbol Characteristic Min Max Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (Note 1) (IC = 30 mAdc, IB = 0) MJD31, MJD32 MJD31C, MJD32C VCEO(sus) Vdc 40 100 Collector Cutoff Current (VCE = 40 Vdc, IB = 0) MJD31, MJD32 (VCE = 60 Vdc, IB = 0) MJD31C, MJD32C ICEO Collector Cutoff Current (VCE = Rated VCEO, VEB = 0) ICES Emitter Cutoff Current (VBE = 5 Vdc, IC = 0) IEBO - - mAdc - 50 - 50 - 20 - 1 25 10 - 50 - 1.2 - 1.8 3 - 20 - mAdc mAdc ON CHARACTERISTICS (Note 1) hFE DC Current Gain (IC = 1 Adc, VCE = 4 Vdc) (IC = 3 Adc, VCE = 4 Vdc) Collector-Emitter Saturation Voltage (IC = 3 Adc, IB = 375 mAdc) VCE(sat) Base-Emitter On Voltage (IC = 3 Adc, VCE = 4 Vdc) VBE(on) Vdc Vdc DYNAMIC CHARACTERISTICS Current Gain - Bandwidth Product (Note 2) (IC = 500 mAdc, VCE = 10 Vdc, ftest = 1 MHz) fT Small-Signal Current Gain (IC = 0.5 Adc, VCE = 10 Vdc, f = 1 kHz) hfe MHz Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. 2. fT = hfe* ftest. www.onsemi.com 2 MJD31 (NPN), MJD32 (PNP) TYPICAL CHARACTERISTICS VCC +30 V PD, POWER DISSIPATION (WATTS) TA TC 2.5 25 2 20 +11 V RB SCOPE 0 1.5 15 TA (SURFACE MOUNT) TC 1 10 0.5 5 0 0 25 tr, tf 10 ns DUTY CYCLE = 1% 50 75 100 T, TEMPERATURE (C) 125 150 Figure 2. Switching Time Test Circuit IB1 = IB2 IC/IB = 10 ts = ts - 1/8 tf TJ = 25C ts 1 t, TIME (s) 0.3 3 2 IC/IB = 10 TJ = 25C tr @ VCC = 30 V 0.7 0.5 -4 V RB and RC VARIED TO OBTAIN DESIRED CURRENT LEVELS D1 MUST BE FAST RECOVERY TYPE, e.g.: 1N5825 USED ABOVE IB 100 mA MSD6100 USED BELOW IB 100 mA REVERSE ALL POLARITIES FOR PNP. 2 1 D1 51 -9 V Figure 1. Power Derating t, TIME (s) RC 25 ms tr @ VCC = 10 V tf @ VCC = 30 V 0.7 0.5 0.3 0.2 tf @ VCC = 10 V 0.1 0.07 0.05 0.03 0.02 0.03 100 td @ VBE(off) = 2 V 0.05 0.07 0.1 0.3 0.5 0.7 0.1 0.07 0.05 0.03 0.03 1 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS) Figure 3. Turn-On Time Figure 4. Turn-Off Time 2 Duty Cycle = 0.5 0.2 RqJA (C/W) 10 0.1 0.05 0.02 1 0.01 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 t, PULSE TIME (sec) Figure 5. Thermal Response www.onsemi.com 3 1 10 100 1000 3 MJD31 (NPN), MJD32 (PNP) TYPICAL CHARACTERISTICS - MJD31, MJD31C (NPN) 1000 1000 VCE = 4 V -55C 10 1 0.01 0.6 VCE(sat), COLL-EMITT SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 25C 100 25C 100 -55C 10 1 0.1 1 0.01 10 Figure 7. DC Current Gain at VCE = 2 V 150C 0.3 0.2 25C 0.1 -55C 0.01 0.1 1 10 IC, COLLECTOR CURRENT (A) 1.2 1.1 0.9 0.9 -55C 25C 0.6 0.5 150C 0.4 0.3 0.01 0.1 1 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) VBE(on), BASE-EMITTER ON VOLTAGE (V) 1.0 0.7 -55C 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) 10 Figure 9. Base-Emitter Saturation Voltage VCE = 5 V 0.8 IC/IB = 10 1.0 Figure 8. Collector-Emitter Saturation Voltage 0.2 0.001 10 Figure 6. DC Current Gain at VCE = 4 V 0.4 1.1 1 IC, COLLECTOR CURRENT (A) 0.5 1.2 0.1 IC, COLLECTOR CURRENT (A) IC/IB = 10 0 0.001 VCE = 2 V 150C VBE(sat), BASE-EMITT SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 150C 2 TA = 25C 1.6 1.2 100 mA 500 mA 0.8 IC = 3 A 1A 0.4 10 mA 0 0.01 0.1 1 10 100 IC, COLLECTOR CURRENT (A) IB, BASE CURRENT (mA) Figure 10. Base-Emitter "On" Voltage Figure 11. Collector Saturation Region www.onsemi.com 4 1000 MJD31 (NPN), MJD32 (PNP) TYPICAL CHARACTERISTICS - MJD31, MJD31C (NPN) 100 Cib 100 Cob 10 0.1 1 10 VR, REVERSE VOLTAGE (V) VCE = 5 V TA = 25C 10 1 0.001 1 100 Figure 12. Capacitance 0.01 0.1 1 IC, COLLECTOR CURRENT (A) Figure 13. Current-Gain-Bandwidth Product 10 IC, COLLECTOR CURRENT (A) C, CAPACITANCE (pF) TA = 25C fT, CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) 1000 1 0.1 0.01 1 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) Figure 14. Safe Operating Area www.onsemi.com 5 100 10 MJD31 (NPN), MJD32 (PNP) TYPICAL CHARACTERISTICS - MJD32, MJD32C (PNP) 1000 1000 hFE, DC CURRENT GAIN 100 -55C 10 1 0.01 0.9 1 1.4 150C 0.6 0.5 0.4 0.3 0.2 25C 0.1 0 0.001 0.01 0.1 1 VBE(on), BASE-EMITTER ON VOLTAGE (V) 1 10 IC/IB = 10 1.2 1.0 -55C 0.8 25C 0.6 150C 0.4 0.2 0.001 10 0.01 0.1 1 10 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 17. Collector-Emitter Saturation Voltage Figure 18. Base-Emitter Saturation Voltage 1.2 VCE = 5 V 1.0 0.9 150C 25C 0.6 0.5 -55C 0.3 0.2 0.001 0.1 Figure 16. DC Current Gain at VCE = 2 V 0.7 0.4 0.01 Figure 15. DC Current Gain at VCE = 4 V -55C 0.7 10 IC, COLLECTOR CURRENT (A) IC/IB = 10 0.8 -55C IC, COLLECTOR CURRENT (A) 0.8 1.1 100 1 10 VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) VCE(sat), COLL-EMITT SATURATION VOLTAGE (V) 1 0.1 VCE = 2 V 25C 150C 0.01 0.1 1 IC, COLLECTOR CURRENT (A) 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) hFE, DC CURRENT GAIN VCE = 4 V 25C 150C 2 TA = 25C 500 mA 1.6 IC = 3 A 100 mA 1.2 1A 0.8 0.4 10 mA 0 0.01 0.1 1 10 100 IB, BASE CURRENT (mA) Figure 20. Collector Saturation Region Figure 19. Base-Emitter "On" Voltage www.onsemi.com 6 1000 MJD31 (NPN), MJD32 (PNP) TYPICAL CHARACTERISTICS 100 1000 fT, CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) Cib 100 Cob 10 0.1 1 10 VCE = 5 V TA = 25C 10 1 0.001 1 100 0.01 0.1 1 VR, REVERSE VOLTAGE (V) IC, COLLECTOR CURRENT (A) Figure 21. Capacitance Figure 22. Current-Gain-Bandwidth Product 10 IC, COLLECTOR CURRENT (A) C, CAPACITANCE (pF) TA = 25C 1 ms 1 1s 0.1 0.01 1 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) Figure 23. Safe Operating Area www.onsemi.com 7 100 10 MJD31 (NPN), MJD32 (PNP) ORDERING INFORMATION Package Type Package Shipping MJD31CG DPAK (Pb-Free) 369C 75 Units / Rail NJVMJD31CG* DPAK (Pb-Free) 369C 75 Units / Rail MJD31C1G IPAK (Pb-Free) 369D 75 Units / Rail MJD31CRLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel NJVMJD31CRLG* DPAK (Pb-Free) 369C 1,800 / Tape & Reel MJD31CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD31CT4G* DPAK (Pb-Free) 369C 2,500 / Tape & Reel MJD31T4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD31T4G* DPAK (Pb-Free) 369C 2,500 / Tape & Reel MJD32CG DPAK (Pb-Free) 369C 75 Units / Rail NJVMJD32CG* DPAK (Pb-Free) 369C 75 Units / Rail MJD32CRLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel MJD32CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD32CT4G* DPAK (Pb-Free) 369C 2,500 / Tape & Reel MJD32RLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel MJD32T4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD32T4G* DPAK (Pb-Free) 369C 2,500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. www.onsemi.com 8 MJD31 (NPN), MJD32 (PNP) PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. A E C A b3 B c2 4 L3 Z D 1 2 H DETAIL A 3 L4 NOTE 7 c SIDE VIEW b2 e b TOP VIEW 0.005 (0.13) M C Z H L2 GAUGE PLANE C L L1 DETAIL A DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z BOTTOM VIEW Z SEATING PLANE BOTTOM VIEW A1 ALTERNATE CONSTRUCTIONS ROTATED 905 CW STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.028 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.114 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 9 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.72 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.90 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- MJD31 (NPN), MJD32 (PNP) PACKAGE DIMENSIONS IPAK CASE 369D ISSUE C C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 Z A S 1 2 3 -T- SEATING PLANE K J F H D G DIM A B C D E F G H J K R S V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 --- 3 PL 0.13 (0.005) M STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR T ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MJD31/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: NJVMJD31CT4G NJVMJD32T4G NJVMJD31T4G NJVMJD31CG NJVMJD31CRLG