Resistors Surface Mount QSOP Resistor Networks Surface Mount QSOP Surface Mount QSOP Resistor Networks Resistor Networks QSOP Series * * * * * Reliable,QSOP no internal Seriescavity High resistor density - .025" lead spacing Reliable, internal StandardQSOP JEDEC 16,no 20, and 24cavity pin packages Series (R) High resistor density .025" lead spacing Ultra-stable TaNSil resistors on silicon substrate * Reliable, no internal cavity RoHS compliant and JEDEC Sn/Pb terminations Standard 20, lead and spacing 24available pin packages * High resistor density16, - .025" * Standard JEDEC 16, 20,resistors and 24 pinon packages Ultra-stable TaNSil(R) silicon substrate * Ultra-stable TaNSil(R) resistors on silicon substrate RoHS compliant and Sn/Pb terminations available * RoHS compliant and Sn/Pb terminations available Pb-freevolume parts complyapplications with EU Directive 2011/65/EU (RoHS2) a IRC's TaNSil(R) QSOP resistor networks are the perfect solution forAllhigh that demand small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component IRC's TaNSil(R) cost, QSOPand resistor are the perfect solution for high volume applications that demand a count, lower resistor highnetworks reliability. small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component The tantalum film system on high silicon provides precision tolerance, exceptional TCR tracking, low cost count,nitride lower resistor cost, and reliability. and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC's The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost (R) resistor film. self-passivating TaNSil and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC's self-passivating TaNSil resistor film. The QSOP series is ideally suited for the latest surface mount assembly techniques and each lead can be The series isThe ideally suited forgull the latest mount assembly each lead can bestresses 100% visuallyQSOP inspected. compliant wing surface leads relieve thermaltechniques expansionand and contraction 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. (R) created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC QSOP networks. IRCresistor QSOP resistor networks. Electrical Electrical DataData Environmental Data Environmental Data Resistance Range 10 to 250K Resistance Range 10 to 250K Absolute Tolerance To 0.1% Absolute Tolerance Ratio Tolerance to R1 To 0.05% To 0.05% Absolute TCR To 25ppm/C To 25ppm/C Tracking TCR To 5ppm/C Element Power Rating @ 70C Tracking TCR To 5ppm/C 100mW Isolated Schematic Element Power Rating @ 70C Bussed Schematic Isolated Schematic Package Power Rating @ 70C Rated Operating Voltage (not to exceed P x R) 50mW 100mW750mW 16-Pin 16-Pin 750mW Volts 20-Pin 1001.0W 24-Pin 1.0W Operating Temperature -55C to +125C Rated Operating______ Voltage 100 Volts (not to exceed Noise P x R) Operating Temperature <-30dB IRC reserves Note the right to make changes in product specification without notice or liability. General 0.02% Thermal Shock R 0.1% 0.02% Power Conditioning Power Conditioning High Temperature Exposure High Temperature Exposure Short-time Overload Short-time Overload Low Temperature Storage Low Life Temperature Storage All information is subject to IRC's own data and is considered accurate at time of going to print. Life TT Electronics reserves the right to make changes in product specification without notice or liability. <-30dB * Corpus USA (c) IRC Advanced FilmtoDivision All information is subject TT Electronics' ownChristi dataTexas and78411 is considered accurate at time of going to print. Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com (c) TT Electronics plc General Note Delta R 0.03% 0.1% 0.1% 0.03% 0.03% 0.1% 0.05% 0.03% 0.02% 0.05% 0.05% 0.02% 0.03% 0.05% 0.05% 0.03% 0.1% 0.05% 0.05% -55C to +125C General Note Noise Thermal Shock Typical Max Delta DeltaTypical R R Max Delta 20-Pin 50mW 1.0W 24-Pin 1.0W Bussed Schematic ______ Package Power Rating @ 70C MIL-PRF-83401 To 0.1% Ratio Tolerance to R1 Absolute TCR Test Per Test Per MIL-PRF-83401 RC reserves the right to make changes in product specification without notice or liability. 0.1% BI Technologies 0.05% IRC Welwyn A subsidiary of TT electronics plc http://www.ttelectronics.com/resistors QSOP Series Issue January 2009 Sheet 1 of 4 09.17 Surface Mount QSOP Resistor Networks Surface Mount QSOP QSOP Series Resistor Networks Manufacturing Capability Data ISOLATED SCHEMATIC A Surface Mount QSOP Resistor Networks Absolute TCR (ppm/C) BUSSED SCHEMATIC B Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) 10-25 FGJ FG 100 10-25 FGJ FG 200 50 26-50 FGJ DFG 100 10 51-100 5 Best Tracking (ppm/C) 101-200 Ohmic Range 201-500 () 100 26-50 DFGJ CD FG Manufacturing Capability Data 51-200 CDFGJ CDFG ISOLATED SCHEMATIC A DFGJ CDFG BUSSED SCHEMATIC B 50 250 201-250K Ohmic Range () BCDFGJ Available Tolerances ABCDFG Available Ratio Tolerances 10-25 FGJ FG Surface Mount QSOP Resistor Networks Absolute TCR (ppm/C) Available B CDFGJ Tolerances BCDFG Available Ratio BCDFG Tolerances 25 Best Tracking 20 (ppm/C) 501-100K 10-25 B CFDGFJG J ABF CG DFG 5 200 50 50 26-50 26-50 F FG G JJ D DF FG G 100 100 10 5 51-100 5 Best Tracking (ppm/C) 101-200 Ohmic Range 201-500 () 100 501-100K 10-25 50 Best Tracking 5 10 (ppm/C) 26-50 51-100 Ohmic Range 51-100 101-200 () 26-50 D C F 26-50 DF FG G JJ CD D FG G Manufacturing Capability Data Surface Mount QSOP Resistor Networks 51-200 250 100 Absolute TCR (ppm/C) 201-250K Ohmic Range () CDFGJ CDFG ISOLATED SCHEMATIC A BCDFGJ Available AB FG AC BD FG Available Ratio Tolerances Manufacturing Capability Data Tolerances 10-25 Absolute TCR (ppm/C) 50 250 100 F G J SCHEMATIC FG A ISOLATED 26-50 Ohmic Range 51-200 () DFGJ Available CDFGJ Tolerances CDFG Available Ratio CDFG Tolerances 201-250K 10-25 B CFDGFJG J AC B FG AB D FG FG 5 100 26-50 DFGJ CDFG 51-200 CDFGJ 201-250K 26-50 26-50 DFGJ DFGJ CDFG BUSSED SCHEMATIC B DFGJ Available BCDFGJ Tolerances BCDFG Available Ratio BCDFG Tolerances B CFDGFJG J A B C DFG FG BUSSED SCHEMATIC B DFFGGJ J 50 25 Best Tracking 20 (ppm/C) 5 200 Available DFGJ Tolerances CDDFFGG Available Ratio BCCDDFFGG Tolerances 100 50 Best Tracking 50 25 (ppm/C) 101-200 201-500 10-25 BD CFF DGG FJJG J B CFDGF G 25 20 200 50 26-50 201-500 501-100K B CFDGFJG J DCD FDG FFGG ABBC 100 20 5 CDFG 10 51-100 201-500 501-100K DD FG J J BC FG CCC DDD FFG ABB FGG 50 20 5 BC FG DD FG G D F JJ J AB FG AC BD C D FG G C D F 5 50 50 101-200 501-100K 51-100 26-50 BD CFF DGG FJJG J FG ABC BC CD DG FGG DD FF 25 5 50 100 51-200 51-200 CD DF FG G JJ C CD DF FG G C 10 5 201-500 101-200 51-100 BC FG DD FG G D F JJ J BCCDDFFGG 20 25 50 201-250K BCDFGJ ABFG 5 201-500 501-100K 101-200 BC FG DD FG J J ABBCCDDFFGG 20 5 25 ABBC FFGG DCD FDG 250 25 50 100 (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General Note QSOP Series Issue January 2009 Sheet 2 of 4 26-50 DFGJ CDFG 50 501-100K 201-500 26-50 B CFDGFJG J 51-200 CDFGJ CDFG 10 5 201-500 51-100 501-100K B BI C FG DD FTechnologies G J J ABC DDD FFG BCC FGIRC G 201-250K BC FG DD FG J J AB C DFG 5 50 501-100K 101-200 51-100 BC FG DD FG J J ABC BCC FGG DDD FFG 5 25 50 201-500 BCDFGJ BCDFG 20 TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. 25 (c) TT100 Electronics plc26-50 5 20 100 Welwyn 20 50 5 http://www.ttelectronics.com/resistors 09.17 Surface Mount QSOP Resistor Networks Surface Mount QSOP QSOP Series Resistor Networks Physical Data # OF PINS DIMENSION "D" ZD REF 16 0.193 0.004 0.009 20 0.341 0.004 0.058 24 0.341 0.004 0.033 Note: N = number of pins (16, 20, 24) Note: Lead Coplanarity 0.004" Max. Note: All dimesions exclude mold flash and end flash which shall not exceed 0.006" per side. Drawing proportions not to scale. Schematic Data Power Derating Curve N R1 2 3 Schematic A Isolated N % Of Rated Power 100 1 R1 50 10 1 2 3 Schematic B Bussed 25 70 125 Temperature in C Note: N = number of pins (16, 20, 24) (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. QSOP Series Issue January 2009 Sheet 3 of 4 BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors (c) TT Electronics plc 09.17 Surface Mount QSOP Resistor Networks Surface Mount QSOP QSOP Series Resistor Networks Ordering Data Prefix GUS - QS8A - 01 - 1002 - F B Style, Schematic and Termination QS8A = 16-pin, 8 Isolated Resistors, with standard Sn/Pb terminations QS8ALF = 16-pin, 8 Isolated Resistors, with 100% matte tin, Pb-free terminations QS8B = 16-pin, 15 Bussed Resistors, with standard Sn/Pb terminations QS8BLF = 16-pin, 15 Bussed Resistors, with 100% matte tin, Pb-free terminations QS0A = 20-pin, 10 Isolated Resistors, with standard Sn/Pb terminations QS0ALF = 20-pin, 10 Isolated Resistors, with 100% matte tin, Pb-free terminations QS0B = 20-pin, 19 Bussed Resistors, with standard Sn/Pb terminations QS0BLF = 20-pin, 19 Bussed Resistors, with 100% matte tin, Pb-free terminations QSCA = 24-pin, 12 Isolated Resistors, with standard Sn/Pb terminations QSCALF = 24-pin, 12 Isolated Resistors, with 100% matte tin, Pb-free terminations QSCB = 24-pin, 23 Bussed Resistors, with standard Sn/Pb terminations QSCBLF = 24-pin, 23 Bussed Resistors, with 100% matte tin, Pb-free terminations Absolute TCR Code 00 = 250 ppm/C; 01 = 100 ppm/C; 02 = 50 ppm/C; 03 = 25 ppm/C Resistance Code 4-Digit Resistance Code Ex: 1002 = 10K, 50R1 = 50.1 Absolute Tolerance Code J = 5%; G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1% Ratio Tolerance Code (optional) G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Specify tubes or tape & reel. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. QSOP Series Issue January 2009 Sheet 4 of 4 BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors (c) TT Electronics plc 09.17