o16 LB Series Control Units Flush Silhouette Switches LB Series Standard bezel models with a panel depth of 27.9 mm. Removable contact blocks ideal for single board mounting. Flush bezel projects only 2mm from front of panel. **Pushbuttons, selector switches, and key selector switches with up to 3PDT contacts. **Key selectors with keys that are difficult to duplicate. Seven different key numbers to choose from. **Black or metallic flush bezels available. **Bright and clear illumination surface. LED illumination. **Gold-clad, cross-bar contact, or high-capacity silver contacts. **Protection degree: IP65 (IEC60529) **CCC pending. Safety Standards Mark File No. or Organization UL508 UL Recognition No.E55996 CSA 22.2 No.14 CSA File No. LR 21451 TUV Rheinland EN60947-5-1 EU Low Voltage Directive Contact Ratings Specifications Gold Contact (switch base: blue) Rated Insulation Voltage Rated Thermal Current Rated Operating Voltage Rated Operating Current (resistive load) Contact Material ** Minimum applicable load (reference value): 5V AC/DC, 1 mA Applicable range is subject to the operating conditions and load. Silver Contact (switch base: gray) Rated Insulation Voltage Rated Operating Voltage Electrical AC 50/60Hz Life 50,000 Rated operations DC Operating Electrical AC Current 50/60Hz Life 100,000 operations DC Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load Rated Thermal Current Contact Material ** AC inductive load: PF=0.6 to 0.7 250V 30V -- -- 5A 2.5A -- -- 3A 1A 5A Silver 125V 250V 5A 5A 3A 1.5A 1.1A -- 0.55A -- 5A 3A 3A 1.5A 0.6A -- 0.22A -- DC inductive load: L/R=7 ms max. LED Ratings Rated Voltage Voltage Range LED Part No. Current Draw Voltage Range LED Life (reference value) 5V DC 12V AC/DC 24V AC/DC 5V DC5% 12V AC/DC10% 24V AC/DC 10% LB9Z-LED5 LB9Z-LED1 LB9Z-LED2 A, R, W: 22 mA G, PW, S: 16 mA Die stamped on base Approx. 30,000 hours (until the brightness reduces to 50% the initial value when lit at complete direct current the rated voltage under 25C environment.) A, PW, R, W A, PW, R, W X1 X2 (-) X1 (+) X2 Internal Circuit G, S G, S X1 X1 (+) X2 (-) LED Chip Protection Diode Zener Diode Resistor X2 Varistor ** (color code): A (amber), G (green), PW (pure white), R (red), S (blue), W (white) ** For orange, specify "A" (for amber). ** Use the pure white (PW) module for yellow illumination. ** LED lamp contains a current-limiting resistor. 6 -25 to +60C (no freezing) Illuminated units: -25 to +55C Storage Temperature -30 to +80C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Contact Resistance 50 mW maximum (initial value) Insulation Resistance 100 MW minimum (500V DC megger) Between live part and ground: 2,000V AC, 1 minute Between terminals of different poles: Switch Unit 2,000V AC, 1 minute Dielectric Between terminals of the same poles: Strength 1,000V AC, 1 minute Illumination Between live part and ground: Unit 2,000V AC, 1 minute Operating extremes/Damage limits: Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Operating extremes: 100 m/s2 Shock Resistance Damage limits: 1,000 m/s2 Momentary: 2,000,000 Maintained: 250,000 Mechanical Life 250,000 (minimum operations) Selector switches Key selector switches 250,000 Momentary: 50,000 / 100,000 (*1) Electrical Life Maintained: 50,000 / 100,000 (*2) (minimum operations) Selector switches: 50,000 / 100,000 (*2) Key selector switches: 50,000 / 100,000 (*2) Degree of Protection IP65 (IEC 60529) Solder/tab terminal #110 Terminal Style PC board terminal 11g (LB3L-M1T24) 10g (LB3P-1T04) 10g (LB3B-M1T2) 12g (LB3S-2T2) 25g (LB3K-2ST2A) 17g (LB8L-M1T24) Weight (approx.) 16g (LB8P-1T04) 16g (LB8B-M1T2) 18g (LB8S-2T2) 31g (LB8K-2ST2A) 18g (LB8GL-M1T24) 17g (LB8GB-M1T2) Operating Temperature 250V 3A 30V DC 125V AC 0.1A 0.1A Gold-clad silver * 1: Switching frequency 1800 operations/h. * 2: Switching frequency 1200 operations/h. LB Series Illuminated Pushbuttons Package Quantity:1 Part No. (Ordering No.) Shape Operation Contact Material Standard Bezel Round LB1L Operating Voltage 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Silver 12V AC/DC 24V AC/DC 5V DC Metal Bezel Gold 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC 24V AC/DC Standard Bezel Square LB2L 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Silver 12V AC/DC 24V AC/DC 5V DC Gold Metal Bezel 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC 24V AC/DC LB1L-M1T11 LB1L-M1T11V LB6L-M1T11 LB6L-M1T11V LB1L-M1T21 LB1L-M1T21V LB6L-M1T21 LB6L-M1T21V SPDT LB1L-M1T13 LB1L-M1T13V LB6L-M1T13 LB6L-M1T13V DPDT LB1L-M1T23 LB1L-M1T23V LB6L-M1T23 LB6L-M1T23V SPDT LB1L-M1T14 LB1L-M1T14V LB6L-M1T14 LB6L-M1T14V LB1L-M1T24V LB6L-M1T24 LB6L-M1T24V DPDT LB1L-M1T24 SPDT LB1L-M1T51 -- LB6L-M1T51 -- DPDT LB1L-M1T61 -- LB6L-M1T61 -- SPDT LB1L-M1T53 -- LB6L-M1T53 -- DPDT LB1L-M1T63 -- LB6L-M1T63 -- SPDT LB1L-M1T54 -- LB6L-M1T54 -- DPDT LB1L-M1T64 -- LB6L-M1T64 -- SPDT LB1L-A1T11 LB1L-A1T11V LB6L-A1T11 LB6L-A1T11V DPDT LB1L-A1T21 LB1L-A1T21V LB6L-A1T21 LB6L-A1T21V SPDT LB1L-A1T13 LB1L-A1T13V LB6L-A1T13 LB6L-A1T13V DPDT LB1L-A1T23 LB1L-A1T23V LB6L-A1T23 LB6L-A1T23V SPDT LB1L-A1T14 LB1L-A1T14V LB6L-A1T14 LB6L-A1T14V LB6L-A1T24V DPDT LB1L-A1T24 LB1L-A1T24V LB6L-A1T24 SPDT LB1L-A1T51 -- LB6L-A1T51 -- DPDT LB1L-A1T61 -- LB6L-A1T61 -- SPDT LB1L-A1T53 -- LB6L-A1T53 -- DPDT LB1L-A1T63 -- LB6L-A1T63 -- SPDT LB1L-A1T54 -- LB6L-A1T54 -- DPDT LB1L-A1T64 -- LB6L-A1T64 -- SPDT LB2L-M1T11 LB2L-M1T11V LB7L-M1T11 LB7L-M1T11V DPDT LB2L-M1T21 LB2L-M1T21V LB7L-M1T21 LB7L-M1T21V SPDT LB2L-M1T13 LB2L-M1T13V LB7L-M1T13 LB7L-M1T13V DPDT LB2L-M1T23 LB2L-M1T23V LB7L-M1T23 LB7L-M1T23V SPDT LB2L-M1T14 LB2L-M1T14V LB7L-M1T14 LB7L-M1T14V LB2L-M1T24V LB7L-M1T24 LB7L-M1T24V DPDT LB2L-M1T24 SPDT LB2L-M1T51 -- LB7L-M1T51 -- DPDT LB2L-M1T61 -- LB7L-M1T61 -- SPDT LB2L-M1T53 -- LB7L-M1T53 -- DPDT LB2L-M1T63 -- LB7L-M1T63 -- SPDT LB2L-M1T54 -- LB7L-M1T54 -- DPDT LB2L-M1T64 -- LB7L-M1T64 -- SPDT LB2L-A1T11 LB2L-A1T11V LB7L-A1T11 LB7L-A1T11V DPDT LB2L-A1T21 LB2L-A1T21V LB7L-A1T21 LB7L-A1T21V SPDT LB2L-A1T13 LB2L-A1T13V LB7L-A1T13 LB7L-A1T13V DPDT LB2L-A1T23 LB2L-A1T23V LB7L-A1T23 LB7L-A1T23V SPDT LB2L-A1T14 LB2L-A1T14V LB7L-A1T14 LB7L-A1T14V LB7L-A1T24V DPDT LB2L-A1T24 LB2L-A1T24V LB7L-A1T24 SPDT LB2L-A1T51 -- LB7L-A1T51 -- DPDT LB2L-A1T61 -- LB7L-A1T61 -- SPDT LB2L-A1T53 -- LB7L-A1T53 -- DPDT LB2L-A1T63 -- LB7L-A1T63 -- SPDT LB2L-A1T54 -- LB7L-A1T54 -- DPDT LB2L-A1T64 -- LB7L-A1T64 -- A G PW R S W Y A G PW R S W Y Key Selector Switches Black Bezel SPDT DPDT Color Code Selector Switches Flush Bezel Square (flush lens) LB7L-M1 LB7L-A1 Flush Bezel Solder/Tab PC Board Terminal Terminal Pushbuttons Black Bezel Standard Bezel Solder/Tab PC Board Terminal Terminal Pilot Lights Flush Bezel Round (flush lens) LB6L-M1 LB6L-A1 Contact Illuminated Pushbuttons Round / Square Illuminated Pushbuttons ** Specify the bezel type in place of in the Part No.: M (metal), Blank (black) ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Illuminated pushbuttons contain an LED unit. ** See page 26 for dimensions. ** See page 39 for maintenance LED unit. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 42 for details on the marking plate and film. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB1L-M1T14W 7 LB Series Illuminated Pushbuttons Rectangular / Rectangular with 3-sided Barrier Illuminated Pushbuttons Package Quantity:1 Part No. (Ordering No.) Shape Operation Contact Material Standard Bezel Rectangular LB3L Operating Voltage 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Flush Bezel Rectangular (flush lens) LB8L-M1 LB8L-A1 Silver 12V AC/DC 24V AC/DC 5V DC Gold 12V AC/DC Metal Bezel 24V AC/DC Maintained 5V DC Silver Black Bezel 12V AC/DC 24V AC/DC Standard Bezel Rectangular with 3-sided Barrier LB4L 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Silver 12V AC/DC 24V AC/DC 5V DC Gold 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC 24V AC/DC Contact Standard Bezel Solder/Tab PC Board Terminal Terminal Flush Bezel Solder/Tab PC Board Terminal Terminal SPDT LB3L-M1T11 LB3L-M1T11V LB8L-M1T11 LB8L-M1T11V DPDT LB3L-M1T21 LB3L-M1T21V LB8L-M1T21 LB8L-M1T21V SPDT LB3L-M1T13 LB3L-M1T13V LB8L-M1T13 LB8L-M1T13V DPDT LB3L-M1T23 LB3L-M1T23V LB8L-M1T23 LB8L-M1T23V SPDT LB3L-M1T14 LB3L-M1T14V LB8L-M1T14 LB8L-M1T14V DPDT LB3L-M1T24 LB3L-M1T24V LB8L-M1T24 LB8L-M1T24V SPDT LB3L-M1T51 -- LB8L-M1T51 -- DPDT LB3L-M1T61 -- LB8L-M1T61 -- SPDT LB3L-M1T53 -- LB8L-M1T53 -- DPDT LB3L-M1T63 -- LB8L-M1T63 -- SPDT LB3L-M1T54 -- LB8L-M1T54 -- DPDT LB3L-M1T64 -- LB8L-M1T64 -- SPDT LB3L-A1T11 LB3L-A1T11V LB8L-A1T11 LB8L-A1T11V DPDT LB3L-A1T21 LB3L-A1T21V LB8L-A1T21 LB8L-A1T21V SPDT LB3L-A1T13 LB3L-A1T13V LB8L-A1T13 LB8L-A1T13V DPDT LB3L-A1T23 LB3L-A1T23V LB8L-A1T23 LB8L-A1T23V SPDT LB3L-A1T14 LB3L-A1T14V LB8L-A1T14 LB8L-A1T14V LB8L-A1T24V DPDT LB3L-A1T24 LB3L-A1T24V LB8L-A1T24 SPDT LB3L-A1T51 -- LB8L-A1T51 -- DPDT LB3L-A1T61 -- LB8L-A1T61 -- SPDT LB3L-A1T53 -- LB8L-A1T53 -- DPDT LB3L-A1T63 -- LB8L-A1T63 -- SPDT LB3L-A1T54 -- LB8L-A1T54 -- DPDT LB3L-A1T64 -- LB8L-A1T64 -- SPDT LB4L-M1T11 LB4L-M1T11V DPDT LB4L-M1T21 LB4L-M1T21V SPDT LB4L-M1T13 LB4L-M1T13V DPDT LB4L-M1T23 LB4L-M1T23V SPDT LB4L-M1T14 LB4L-M1T14V LB4L-M1T24V DPDT LB4L-M1T24 SPDT LB4L-M1T51 -- DPDT LB4L-M1T61 -- SPDT LB4L-M1T53 -- DPDT LB4L-M1T63 -- SPDT LB4L-M1T54 -- DPDT LB4L-M1T64 -- SPDT LB4L-A1T11 LB4L-A1T11V DPDT LB4L-A1T21 LB4L-A1T21V SPDT LB4L-A1T13 LB4L-A1T13V DPDT LB4L-A1T23 LB4L-A1T23V SPDT LB4L-A1T14 LB4L-A1T14V LB4L-A1T24V DPDT LB4L-A1T24 SPDT LB4L-A1T51 -- DPDT LB4L-A1T61 -- SPDT LB4L-A1T53 -- DPDT LB4L-A1T63 -- SPDT LB4L-A1T54 -- DPDT LB4L-A1T64 -- Color Code A G PW R S W Y A G PW R S W Y ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Illuminated pushbuttons contain an LED unit. ** See page 26 for dimensions. ** See page 39 for maintenance LED unit. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 42 for details on the marking plate and film. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB3L-M1T14W 8 LB Series Illuminated Pushbuttons Package Quantity:1 Part No. (Ordering No.) Shape Operation Flush Bezel with Round Guard (flush lens) LB6GL-M1 LB6GL-A1 Contact Material Operating Voltage 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC 12V AC/DC 24V AC/DC 5V DC Gold 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC Flush Bezel with Square Guard (flush lens) LB7GL-M1 LB7GL-A1 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Silver 12V AC/DC 5V DC Gold 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC LB6GL-M1T11 LB6GL-M1T11V LB6GL-M1T21 LB6GL-M1T21V LB6GL-M1T13V SPDT LB6GL-M1T13 DPDT LB6GL-M1T23 LB6GL-M1T23V SPDT LB6GL-M1T14 LB6GL-M1T14V LB6GL-M1T24V DPDT LB6GL-M1T24 SPDT LB6GL-M1T51 -- DPDT LB6GL-M1T61 -- SPDT LB6GL-M1T53 -- DPDT LB6GL-M1T63 -- SPDT LB6GL-M1T54 -- DPDT LB6GL-M1T64 -- SPDT LB6GL-A1T11 LB6GL-A1T11V DPDT LB6GL-A1T21 LB6GL-A1T21V SPDT LB6GL-A1T13 LB6GL-A1T13V DPDT LB6GL-A1T23 LB6GL-A1T23V SPDT LB6GL-A1T14 LB6GL-A1T14V LB6GL-A1T24V DPDT LB6GL-A1T24 SPDT LB6GL-A1T51 -- DPDT LB6GL-A1T61 -- SPDT LB6GL-A1T53 -- DPDT LB6GL-A1T63 -- SPDT DPDT SPDT Use with an optional switchguard (AL-K6SP) LB6GL-A1T54 -- LB6GL-A1T64 -- LB7GL-M1T11 LB7GL-M1T11V DPDT LB7GL-M1T21 LB7GL-M1T21V LB7GL-M1T13V SPDT LB7GL-M1T13 DPDT LB7GL-M1T23 LB7GL-M1T23V SPDT LB7GL-M1T14 LB7GL-M1T14V LB7GL-M1T24V DPDT LB7GL-M1T24 SPDT LB7GL-M1T51 -- DPDT LB7GL-M1T61 -- SPDT LB7GL-M1T53 -- DPDT LB7GL-M1T63 -- SPDT LB7GL-M1T54 -- DPDT LB7GL-M1T64 -- SPDT LB7GL-A1T11 LB7GL-A1T11V DPDT LB7GL-A1T21 LB7GL-A1T21V SPDT LB7GL-A1T13 LB7GL-A1T13V DPDT LB7GL-A1T23 LB7GL-A1T23V SPDT LB7GL-A1T14 LB7GL-A1T14V LB7GL-A1T24V DPDT LB7GL-A1T24 SPDT LB7GL-A1T51 -- DPDT LB7GL-A1T61 -- SPDT LB7GL-A1T53 -- DPDT LB7GL-A1T63 -- SPDT LB7GL-A1T54 -- DPDT LB7GL-A1T64 -- A G PW R S W Y A G PW R S W Y Key Selector Switches 24V AC/DC SPDT DPDT Color Code Selector Switches 24V AC/DC Flush Bezel Solder/Tab PC Board Terminal Terminal Pushbuttons 24V AC/DC Standard Bezel Solder/Tab PC Board Terminal Terminal Pilot Lights Silver Contact Illuminated Pushbuttons Round / Square Illuminated Pushbuttons with Guard ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Illuminated pushbuttons contain an LED unit. ** See page 26 for dimensions. ** See page 39 for maintenance LED unit. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB6GL-M1T11W 9 LB Series Illuminated Pushbuttons Rectangular Illuminated Pushbuttons with Guard Package Quantity:1 Part No. (Ordering No.) Shape Operation Flush Bezel with Rectangular Guard (flush lens) LB8GL-M1 LB8GL-A1 Contact Material Operating Voltage 5V DC Gold 12V AC/DC 24V AC/DC Momentary 5V DC Silver 12V AC/DC 24V AC/DC 5V DC Gold 12V AC/DC 24V AC/DC Maintained 5V DC Silver 12V AC/DC 24V AC/DC Contact Standard Bezel Solder/Tab PC Board Terminal Terminal Flush Bezel Solder/Tab PC Board Terminal Terminal SPDT LB8GL-M1T11 LB8GL-M1T11V DPDT LB8GL-M1T21 LB8GL-M1T21V SPDT LB8GL-M1T13 LB8GL-M1T13V DPDT LB8GL-M1T23 LB8GL-M1T23V SPDT LB8GL-M1T14 LB8GL-M1T14V LB8GL-M1T24V DPDT LB8GL-M1T24 SPDT LB8GL-M1T51 -- DPDT LB8GL-M1T61 -- SPDT LB8GL-M1T53 -- DPDT LB8GL-M1T63 -- SPDT LB8GL-M1T54 -- DPDT SPDT Use with an optional switchguard (AL-KH6SP) LB8GL-M1T64 -- LB8GL-A1T11 LB8GL-A1T11V DPDT LB8GL-A1T21 LB8GL-A1T21V SPDT LB8GL-A1T13 LB8GL-A1T13V DPDT LB8GL-A1T23 LB8GL-A1T23V SPDT LB8GL-A1T14 LB8GL-A1T14V LB8GL-A1T24V DPDT LB8GL-A1T24 SPDT LB8GL-A1T51 -- DPDT LB8GL-A1T61 -- SPDT LB8GL-A1T53 -- DPDT LB8GL-A1T63 -- SPDT LB8GL-A1T54 -- DPDT LB8GL-A1T64 -- Color Code A G PW R S W Y ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Illuminated pushbuttons contain an LED unit. ** See page 26 for dimensions. ** See page 39 for maintenance LED unit. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB6GL-M1T11W 10 LB Series Pilot Lights Package Quantity: 1 Part No. (Ordering No.) Shape Operating Voltage Standard Bezel Solder/Tab Terminal PC Board Terminal Flush Bezel Solder/Tab Terminal PC Board Terminal Color Code Standard Bezel Round LB1P 5V DC LB1P-1T01 LB1P-1T01V LB6P-1T01 LB6P-1T01V Illuminated Pushbuttons Round / Square Pilot Lights Flush Bezel Round (Flush Lens) LB6P LB1P-1T03 LB1P-1T03V LB6P-1T03 LB6P-1T03V 24V AC/DC LB1P-1T04 LB1P-1T04V LB6P-1T04 LB6P-1T04V 5V DC LB2P-1T01 LB2P-1T01V LB7P-1T01 LB7P-1T01V Metal Bezel Pilot Lights 12V AC/DC A G PW R S W Y Black Bezel Pushbuttons Standard Bezel Square LB2P Flush Bezel Square (Flush Lens) LB7P LB2P-1T03 LB2P-1T03V LB7P-1T03 LB7P-1T03V 24V AC/DC LB2P-1T04 LB2P-1T04V LB7P-1T04 LB7P-1T04V Metal Bezel Selector Switches 12V AC/DC A G PW R S W Y Black Bezel Key Selector Switches ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Illuminated pushbuttons contain an LED unit. ** See page 27 for dimensions. ** See page 39 for maintenance LED unit. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB1P-1T04W 11 LB Series Pilot Lights Rectangular / Rectangular with 3-sided Barrier Pilot Lights Package Quantity: 1 Part No. (Ordering No.) Shape Operating Voltage Standard Bezel Solder/Tab Terminal PC Board Terminal Flush Bezel Solder/Tab Terminal PC Board Terminal Color Code Standard Bezel Rectangular LB3P 5V DC LB3P-1T01 LB3P-1T01V LB8P-1T01 LB8P-1T01V Flush Bezel Rectangular (flush lens) LB8P 12V AC/DC LB3P-1T03 LB3P-1T03V LB8P-1T03 LB8P-1T03V 24V AC/DC LB3P-1T04 LB3P-1T04V LB8P-1T04 LB8P-1T04V 5V DC LB4P-1T01 LB4P-1T01V Metal Bezel A G PW R S W Y Black Bezel Standard Bezel Rectangular with 3-sided LB4P 12V AC/DC LB4P-1T03 LB4P-1T03V 24V AC/DC LB4P-1T04 LB4P-1T04V ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Specify the color code in place of in the Part No.: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) ** Pilot lights contain an LED unit. ** See page 27 for dimensions. ** See page 39 for maintenance LED unit. ** When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. Example: LB1P-1T04W 12 A G PW R S W Y LB Series Pushbuttons Package Quantity: 1 Part No. (Ordering No.) Shape Button Style Operation Standard Bezel Round LB1B Contact Contact Material Gold Momentary Silver Button Gold Maintained Silver Gold Metal Bezel Momentary Silver Illuminated Lens Gold Maintained Black Bezel Standard Bezel Square LB2B Gold Momentary Silver Button Gold Maintained Silver Gold Momentary Metal Bezel Silver Illuminated Lens Gold Maintained Silver LB1B-M1T1V LB6B-M1T1 LB6B-M1T1V LB1B-M1T2V LB6B-M1T2 LB6B-M1T2V LB1B-M1T3V LB6B-M1T3 LB6B-M1T3V 3PDT LB1B-M1T3 SPDT LB1B-M1T5 -- LB6B-M1T5 -- DPDT LB1B-M1T6 -- LB6B-M1T6 -- 3PDT LB1B-M1T7 SPDT LB1B-A1T1 LB1B-A1T1V -- LB6B-A1T1 LB6B-A1T1V DPDT LB1B-A1T2 LB1B-A1T2V LB6B-A1T2 LB6B-A1T2V 3PDT LB1B-A1T3 LB1B-A1T3V LB6B-A1T3 LB6B-A1T3V SPDT LB1B-A1T5 -- LB6B-A1T5 -- DPDT LB1B-A1T6 -- LB6B-A1T6 -- LB6B-A1T7 -- -- LB6B-M1T7 -- 3PDT LB1B-A1T7 SPDT LB1B-M1T1L LB1B-M1T1VL LB6B-M1T1L LB6B-M1T1VL DPDT LB1B-M1T2L LB1B-M1T2VL LB6B-M1T2L LB6B-M1T2VL 3PDT LB1B-M1T3L LB1B-M1T3VL SPDT LB1B-M1T5L -- LB6B-M1T5L -- DPDT LB1B-M1T6L -- LB6B-M1T6L -- LB6B-M1T3L LB6B-M1T3VL 3PDT LB1B-M1T7L -- LB6B-M1T7L -- SPDT LB1B-A1T1L LB1B-A1T1VL LB6B-A1T1L LB6B-A1T1VL DPDT LB1B-A1T2L LB1B-A1T2VL LB6B-A1T2L LB6B-A1T2VL 3PDT LB1B-A1T3L LB1B-A1T3VL LB6B-A1T3L LB6B-A1T3VL SPDT LB1B-A1T5L -- LB6B-A1T5L -- DPDT LB1B-A1T6L -- LB6B-A1T6L -- 3PDT LB1B-A1T7L -- LB6B-A1T7L -- SPDT LB2B-M1T1 LB2B-M1T1V LB7B-M1T1 LB7B-M1T1V DPDT LB2B-M1T2 LB2B-M1T2V LB7B-M1T2 LB7B-M1T2V 3PDT LB2B-M1T3 LB2B-M1T3V LB7B-M1T3 LB7B-M1T3V SPDT LB2B-M1T5 -- LB7B-M1T5 -- DPDT LB2B-M1T6 -- LB7B-M1T6 -- -- 3PDT LB2B-M1T7 SPDT LB2B-A1T1 LB2B-A1T1V LB7B-A1T1 LB7B-A1T1V DPDT LB2B-A1T2 LB2B-A1T2V LB7B-A1T2 LB7B-A1T2V 3PDT LB2B-A1T3 LB2B-A1T3V LB7B-A1T3 LB7B-A1T3V SPDT LB2B-A1T5 -- LB7B-A1T5 -- DPDT LB2B-A1T6 -- LB7B-A1T6 -- LB7B-A1T7 -- -- B G R S Y W LB7B-M1T7 -- 3PDT LB2B-A1T7 SPDT LB2B-M1T1L LB2B-M1T1VL LB7B-M1T1L LB7B-M1T1VL DPDT LB2B-M1T2L LB2B-M1T2VL LB7B-M1T2L LB7B-M1T2VL 3PDT LB2B-M1T3L LB2B-M1T3VL SPDT LB2B-M1T5L -- LB7B-M1T5L -- DPDT LB2B-M1T6L -- LB7B-M1T6L -- A G R S Y W B G R S Y W LB7B-M1T3L LB7B-M1T3VL 3PDT LB2B-M1T7L -- LB7B-M1T7L -- SPDT LB2B-A1T1L LB2B-A1T1VL LB7B-A1T1L LB7B-A1T1VL DPDT LB2B-A1T2L LB2B-A1T2VL LB7B-A1T2L LB7B-A1T2VL 3PDT LB2B-A1T3L LB2B-A1T3VL LB7B-A1T3L LB7B-A1T3VL SPDT LB2B-A1T5L -- LB7B-A1T5L -- DPDT LB2B-A1T6L -- LB7B-A1T6L -- 3PDT LB2B-A1T7L -- LB7B-A1T7L -- A G R S Y W ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** For buttons, specify the color code in place of in the Part No.: B (black), G (green), R (red), S (blue), W (white), Y (yellow) ** For illuminated lens, specify the color code in place of in the Part No.: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) ** See page 28 and 29 for dimensions. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** Black is available for illuminated lens. Black illuminated lens consists of a transparent lens and a black marking plate. Specify "B" in place of in the Part No. Example: LB1B-M1T1LB 13 Key Selector Switches Black Bezel LB1B-M1T1 LB1B-M1T2 Selector Switches Flush Bezel Square (flush lens) LB7B-M1 LB7B-A1 SPDT DPDT Color Code Pushbuttons Silver Flush Bezel Solder/Tab PC Board Terminal Terminal Pilot Lights Flush Bezel Round (flush lens) LB6B-M1 LB6B-A1 Standard Bezel Solder/Tab PC Board Terminal Terminal Illuminated Pushbuttons Round / Square Pushbuttons LB Series Pushbuttons Rectangular / Rectangular with 3-sided Barrier Pushbuttons Package Quantity: 1 Part No. (Ordering No.) Shape Button Style Operation Standard Bezel Rectangular LB3B Contact Contact Material Gold Momentary Silver Button Gold Flush Bezel Rectangular (flush lens) LB8B-M1 LB8B-A1 Maintained Silver Gold Momentary Metal Bezel Silver Illuminated Lens Gold Maintained Black Bezel Silver Standard Bezel Rectangular with 3-sided Barrier LB4B Gold Momentary Silver Button Gold Maintained Silver Gold Momentary Silver Illuminated Lens Gold Maintained Silver Standard Bezel Solder/Tab PC Board Terminal Terminal Flush Bezel Solder/Tab PC Board Terminal Terminal SPDT LB3B-M1T1 LB3B-M1T1V LB8B-M1T1 LB8B-M1T1V DPDT LB3B-M1T2 LB3B-M1T2V LB8B-M1T2 LB8B-M1T2V LB3B-M1T3V LB8B-M1T3 LB8B-M1T3V SPDT LB3B-M1T3 DPDT LB3B-M1T5 -- LB8B-M1T5 -- SPDT LB3B-M1T6 -- LB8B-M1T6 -- DPDT LB3B-M1T7 SPDT LB3B-A1T1 LB3B-A1T1V -- LB8B-A1T1 LB8B-A1T1V DPDT LB3B-A1T2 LB3B-A1T2V LB8B-A1T2 LB8B-A1T2V SPDT LB3B-A1T3 LB3B-A1T3V LB8B-A1T3 LB8B-A1T3V DPDT LB3B-A1T5 -- LB8B-A1T5 -- SPDT LB3B-A1T6 -- LB8B-A1T6 -- LB8B-A1T7 -- -- LB8B-M1T7 -- DPDT LB3B-A1T7 SPDT LB3B-M1T1L LB3B-M1T1VL LB8B-M1T1L LB8B-M1T1VL DPDT LB3B-M1T2L LB3B-M1T2VL LB8B-M1T2L LB8B-M1T2VL SPDT LB3B-M1T3L LB3B-M1T3VL DPDT LB3B-M1T5L -- LB8B-M1T5L -- SPDT LB3B-M1T6L -- LB8B-M1T6L -- DPDT LB3B-M1T7L -- LB8B-M1T7L -- LB3B-A1T1L LB3B-A1T1VL LB8B-A1T1L LB8B-A1T1VL DPDT LB3B-A1T2L LB3B-A1T2VL LB8B-A1T2L LB8B-A1T2VL SPDT LB3B-A1T3L LB3B-A1T3VL LB8B-A1T3L LB8B-A1T3VL DPDT LB3B-A1T5L -- LB8B-A1T5L -- SPDT LB3B-A1T6L -- LB8B-A1T6L -- DPDT LB3B-A1T7L -- LB8B-A1T7L -- SPDT LB4B-M1T1 LB4B-M1T1V DPDT LB4B-M1T2 LB4B-M1T2V SPDT LB4B-M1T3 LB4B-M1T3V DPDT LB4B-M1T5 -- SPDT LB4B-M1T6 -- DPDT LB4B-M1T7 LB4B-A1T1 LB4B-A1T1V -- DPDT LB4B-A1T2 LB4B-A1T2V SPDT LB4B-A1T3 LB4B-A1T3V DPDT LB4B-A1T5 -- SPDT LB4B-A1T6 -- DPDT LB4B-A1T7 SPDT LB4B-M1T1L LB4B-M1T1VL DPDT LB4B-M1T2L LB4B-M1T2VL SPDT LB4B-M1T3L LB4B-M1T3VL DPDT LB4B-M1T5L -- SPDT LB4B-M1T6L -- B G R S W Y LB8B-M1T3L LB8B-M1T3VL SPDT SPDT Color Code A G R S W Y B G R S W Y -- DPDT LB4B-M1T7L -- SPDT LB4B-A1T1L LB4B-A1T1VL DPDT LB4B-A1T2L LB4B-A1T2VL SPDT LB4B-A1T3L LB4B-A1T3VL DPDT LB4B-A1T5L -- SPDT LB4B-A1T6L -- DPDT LB4B-A1T7L -- A G R S W Y ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** For buttons, specify the color code in place of in the Part No.: B (black), G (green), R (red), S (blue), W (white), Y (yellow) ** For illuminated lens, specify the color code in place of in the Part No.: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) ** See page 28 and 29 for dimensions. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** Black is available for illuminated lens. Black illuminated lens consist of a transparent lens and a black marking plate. Specify "B" in place of in the Part No. Example: LB3B-M1T1LB 14 LB Series Pushbuttons Package Quantity: 1 Part No. (Ordering No.) Shape Button Style Flush Bezel with Round Guard (flush button) LB6GB-M1 LB6GB-A1 Operation Contact Contact Material Gold Momentary Silver Button Gold Silver Gold Momentary Silver Illuminated Lens Gold Maintained SPDT LB6GB-M1T1 LB6GB-M1T1V DPDT LB6GB-M1T2 LB6GB-M1T2V 3PDT LB6GB-M1T3 LB6GB-M1T3V SPDT LB6GB-M1T5 -- DPDT LB6GB-M1T6 -- 3PDT LB6GB-M1T7 -- SPDT LB6GB-A1T1 LB6GB-A1T1V DPDT LB6GB-A1T2 LB6GB-A1T2V 3PDT LB6GB-A1T3 LB6GB-A1T3V SPDT LB6GB-A1T5 -- DPDT LB6GB-A1T6 -- 3PDT LB6GB-A1T7 SPDT LB6GB-M1T1L LB6GB-M1T1VL DPDT LB6GB-M1T2L LB6GB-M1T2VL 3PDT LB6GB-M1T3L LB6GB-M1T3VL SPDT LB6GB-M1T5L -- DPDT LB6GB-M1T6L -- 3PDT LB6GB-M1T7L -- SPDT LB6GB-A1T1L LB6GB-A1T1VL DPDT LB6GB-A1T2L LB6GB-A1T2VL 3PDT LB6GB-A1T3L LB6GB-A1T3VL SPDT LB6GB-A1T5L -- DPDT LB6GB-A1T6L -- 3PDT SPDT Flush Bezel with Square Guard (flush button) LB7GB-M1 LB7GB-A1 Gold Momentary Silver Button Gold Maintained Gold Momentary Silver Illuminated Lens Gold Maintained -- R G Y A W S -- LB7GB-M1T1 LB7GB-M1T1V DPDT LB7GB-M1T2 LB7GB-M1T2V 3PDT LB7GB-M1T3 LB7GB-M1T3V SPDT LB7GB-M1T5 -- DPDT LB7GB-M1T6 -- 3PDT LB7GB-M1T7 -- SPDT LB7GB-A1T1 LB7GB-A1T1V DPDT LB7GB-A1T2 LB7GB-A1T2V 3PDT LB7GB-A1T3 LB7GB-A1T3V SPDT LB7GB-A1T5 -- DPDT LB7GB-A1T6 -- 3PDT LB7GB-A1T7 SPDT LB7GB-M1T1L LB7GB-M1T1VL DPDT LB7GB-M1T2L LB7GB-M1T2VL 3PDT LB7GB-M1T3L LB7GB-M1T3VL SPDT LB7GB-M1T5L -- DPDT LB7GB-M1T6L -- 3PDT LB7GB-M1T7L -- SPDT LB7GB-A1T1L LB7GB-A1T1VL DPDT LB7GB-A1T2L LB7GB-A1T2VL 3PDT LB7GB-A1T3L LB7GB-A1T3VL SPDT LB7GB-A1T5L -- DPDT LB7GB-A1T6L -- 3PDT LB7GB-A1T7L -- B G R S W Y -- A G R S W Y ** For buttons, specify the color code in place of in the Part No.: B (black), G (green), R (red), S (blue), W (white), Y (yellow) ** For illuminated lens, specify the color code in place of in the Part No.: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) ** See page 30 for dimensions. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** Black is available for illuminated lens. Black illuminated lens consist of a transparent lens and a black marking plate. Specify "B" in place of in the Part No. Example: LB6GB-M1T1LB 15 Key Selector Switches Silver LB6GB-A1T7L B G R Y S W Selector Switches Silver Use with an optional switchguard (AL-K6SP) Color Code Pushbuttons Silver Flush Bezel Solder/Tab PC Board Terminal Terminal Pilot Lights Maintained Standard Bezel Solder/Tab PC Board Terminal Terminal Illuminated Pushbuttons Round / Square Pushbuttons with Guard LB Series Pushbuttons Rectangular Pushbuttons with Guard Package Quantity: 1 Part No. (Ordering No.) Shape Button Style Flush Bezel with Rectangular Guard (flush button) LB8GB-M1 LB8GB-A1 Operation Contact Contact Material Gold Momentary Silver Button Gold Maintained Silver LB8GB-M1T1 LB8GB-M1T1V DPDT LB8GB-M1T2 LB8GB-M1T2V 3PDT LB8GB-M1T3 LB8GB-M1T3V SPDT LB8GB-M1T5 -- DPDT LB8GB-M1T6 -- 3PDT LB8GB-M1T7 SPDT LB8GB-A1T1 LB8GB-A1T1V DPDT LB8GB-A1T2 LB8GB-A1T2V 3PDT LB8GB-A1T3 LB8GB-A1T3V SPDT LB8GB-A1T5 -- DPDT LB8GB-A1T6 -- SPDT Momentary Silver Illuminated Lens Gold Maintained Silver Flush Bezel Solder/Tab PC Board Terminal Terminal SPDT 3PDT Gold Standard Bezel Solder/Tab PC Board Terminal Terminal Use with an optional switchguard (AL-KH6SP) LB8GB-A1T7 -- Color Code B G R Y S W -- LB8GB-M1T1L LB8GB-M1T1VL DPDT LB8GB-M1T2L LB8GB-M1T2VL 3PDT LB8GB-M1T3L LB8GB-M1T3VL SPDT LB8GB-M1T5L -- DPDT LB8GB-M1T6L -- 3PDT LB8GB-M1T7L -- SPDT LB8GB-A1T1L LB8GB-A1T1VL DPDT LB8GB-A1T2L LB8GB-A1T2VL 3PDT LB8GB-A1T3L LB8GB-A1T3VL SPDT LB8GB-A1T5L -- DPDT LB8GB-A1T6L -- 3PDT LB8GB-A1T7L -- A G R S W Y ** For buttons, specify the color code in place of in the Part No.: B (black), G (green), R (red), S (blue), W (white), Y (yellow) ** For illuminated lens, specify the color code in place of in the Part No.: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) ** See page 30 for dimensions. ** Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. For details on the marking plate and film, see page 42. ** Black is available for illuminated lens. Black illuminated lens consist of a transparent lens and a black marking plate. Specify "B" in place of in the Part No. Example: LB6GB-M1T1LB 16 LB Series Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Round LB1S Contact Maintained Gold L R Silver 90 2-position Spring return from right Gold R L Maintained L C Silver Gold R Silver Spring return from right C R L Metal Bezel 45 3-position Gold Silver Spring return from left L C Gold R Spring return two-way L C R Gold Silver Standard Bezel Square LB2S Maintained Gold L R Silver 90 2-position Spring return from right Flush Bezel Square LB7S R L Maintained L C Silver Gold R Silver Metal Bezel Spring return from right L Black Bezel Gold R Silver Spring return from left L C Gold R Silver Spring return two-way Gold L C R Silver LB1S-2T1V LB6S-2T1 LB6S-2T1V LB1S-2T2V LB6S-2T2 LB6S-2T2V LB1S-2T3V LB6S-2T3 LB6S-2T3V 3PDT LB1S-2T3 SPDT LB1S-2T5 -- LB6S-2T5 -- DPDT LB1S-2T6 -- LB6S-2T6 -- 3PDT LB1S-2T7 SPDT LB1S-21T1 -- LB1S-21T1V LB6S-2T7 LB6S-21T1 -- LB6S-21T1V DPDT LB1S-21T2 LB1S-21T2V LB6S-21T2 LB6S-21T2V 3PDT LB1S-21T3 LB1S-21T3V LB6S-21T3 LB6S-21T3V SPDT LB1S-21T5 -- LB6S-21T5 -- DPDT LB1S-21T6 -- LB6S-21T6 -- 3PDT LB1S-21T7 -- LB6S-21T7 DPDT LB1S-3T2 LB1S-3T2V LB1S-3T3V -- LB6S-3T2 LB6S-3T2V LB6S-3T3 LB6S-3T3V 3PDT LB1S-3T3 DPDT LB1S-3T6 -- LB6S-3T6 -- 3PDT LB1S-3T7 -- LB6S-3T7 -- DPDT LB1S-31T2 LB1S-31T2V LB6S-31T2 LB6S-31T2V 3PDT LB1S-31T3 LB1S-31T3V LB6S-31T3 LB6S-31T3V DPDT LB1S-31T6 -- LB6S-31T6 -- 3PDT LB1S-31T7 -- LB6S-31T7 -- DPDT LB1S-32T2 LB1S-32T2V LB6S-32T2 LB6S-32T2V 3PDT LB1S-32T3 LB1S-32T3V LB6S-32T3 LB6S-32T3V DPDT LB1S-32T6 -- LB6S-32T6 -- 3PDT LB1S-32T7 -- LB6S-32T7 -- DPDT LB1S-33T2 LB1S-33T2V LB6S-33T2 LB6S-33T2V 3PDT LB1S-33T3 LB1S-33T3V LB6S-33T3 LB6S-33T3V DPDT LB1S-33T6 -- LB6S-33T6 -- 3PDT LB1S-33T7 -- LB6S-33T7 -- SPDT LB2S-2T1 LB2S-2T1V LB7S-2T1 LB7S-2T1V DPDT LB2S-2T2 LB2S-2T2V LB7S-2T2 LB7S-2T2V LB2S-2T3V LB7S-2T3 LB7S-2T3V 3PDT LB2S-2T3 SPDT LB2S-2T5 -- LB7S-2T5 -- DPDT LB2S-2T6 -- LB7S-2T6 -- 3PDT LB2S-2T7 SPDT LB2S-21T1 -- LB2S-21T1V LB7S-2T7 LB7S-21T1 -- LB7S-21T1V DPDT LB2S-21T2 LB2S-21T2V LB7S-21T2 LB7S-21T2V 3PDT LB2S-21T3 LB2S-21T3V LB7S-21T3 LB7S-21T3V SPDT LB2S-21T5 -- LB7S-21T5 -- DPDT LB2S-21T6 -- LB7S-21T6 -- 3PDT LB2S-21T7 -- LB7S-21T7 DPDT LB2S-3T2 LB2S-3T2V LB2S-3T3V -- LB7S-3T2 LB7S-3T2V LB7S-3T3 LB7S-3T3V 3PDT LB2S-3T3 DPDT LB2S-3T6 -- LB7S-3T6 -- 3PDT LB2S-3T7 -- LB7S-3T7 -- DPDT LB2S-31T2 LB2S-31T2V LB7S-31T2 LB7S-31T2V 3PDT LB2S-31T3 LB2S-31T3V LB7S-31T3 LB7S-31T3V DPDT LB2S-31T6 -- LB7S-31T6 -- 3PDT LB2S-31T7 -- LB7S-31T7 -- DPDT LB2S-32T2 LB2S-32T2V LB7S-32T2 LB7S-32T2V 3PDT LB2S-32T3 LB2S-32T3V LB7S-32T3 LB7S-32T3V DPDT LB2S-32T6 -- LB7S-32T6 -- 3PDT LB2S-32T7 -- LB7S-32T7 -- DPDT LB2S-33T2 LB2S-33T2V LB7S-33T2 LB7S-33T2V 3PDT LB2S-33T3 LB2S-33T3V LB7S-33T3 LB7S-33T3V DPDT LB2S-33T6 -- LB7S-33T6 -- 3PDT LB2S-33T7 -- LB7S-33T7 -- ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** For dimensions, see page 31 and 32. 17 Key Selector Switches 45 3-position C LB1S-2T1 LB1S-2T2 Selector Switches Gold SPDT DPDT Pushbuttons Silver Black Bezel Flush Bezel Solder/Tab PC Board Terminal Terminal Pilot Lights Flush Bezel Round LB6S Standard Bezel Solder/Tab PC Board Terminal Terminal Illuminated Pushbuttons Round / Square Selector Switches LB Series Selector Switches Rectangular Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Rectangular LB3S Maintained Gold L R Silver 90 2-position Spring return from right Gold Flush Bezel Rectangular LB8S R L Silver Maintained L C Gold R Silver Metal Bezel Spring return from right L 45 3-position Black Bezel Standard Bezel Solder/Tab PC Board Terminal Terminal Contact C Gold R Silver Spring return from left C L R Gold Silver Spring return two-way L C R Gold Silver Flush Bezel Solder/Tab PC Board Terminal Terminal SPDT LB3S-2T1 LB3S-2T1V LB8S-2T1 DPDT LB3S-2T2 LB3S-2T2V LB8S-2T2 LB8S-2T2V 3PDT LB3S-2T3 LB3S-2T3V LB8S-2T3 LB8S-2T3V LB8S-2T1V SPDT LB3S-2T5 -- LB8S-2T5 -- DPDT LB3S-2T6 -- LB8S-2T6 -- 3PDT LB3S-2T7 -- LB8S-2T7 SPDT LB3S-21T1 LB3S-21T1V LB8S-21T1 -- LB8S-21T1V DPDT LB3S-21T2 LB3S-21T2V LB8S-21T2 LB8S-21T2V 3PDT LB3S-21T3 LB3S-21T3V LB8S-21T3 LB8S-21T3V SPDT LB3S-21T5 -- LB8S-21T5 -- DPDT LB3S-21T6 -- LB8S-21T6 -- 3PDT LB3S-21T7 DPDT LB3S-3T2 LB3S-3T2V LB3S-3T3V -- -- LB8S-21T7 LB8S-3T2 LB8S-3T2V LB8S-3T3 LB8S-3T3V 3PDT LB3S-3T3 DPDT LB3S-3T6 -- LB8S-3T6 -- 3PDT LB3S-3T7 -- LB8S-3T7 -- DPDT LB3S-31T2 LB3S-31T2V LB8S-31T2 LB8S-31T2V 3PDT LB3S-31T3 LB3S-31T3V LB8S-31T3 LB8S-31T3V DPDT LB3S-31T6 -- LB8S-31T6 -- 3PDT LB3S-31T7 -- LB8S-31T7 -- DPDT LB3S-32T2 LB3S-32T2V LB8S-32T2 LB8S-32T2V 3PDT LB3S-32T3 LB3S-32T3V LB8S-32T3 LB8S-32T3V DPDT LB3S-32T6 -- LB8S-32T6 -- 3PDT LB3S-32T7 -- LB8S-32T7 -- DPDT LB3S-33T2 LB3S-33T2V LB8S-33T2 LB8S-33T2V 3PDT LB3S-33T3 LB3S-33T3V LB8S-33T3 LB8S-33T3V DPDT LB3S-33T6 -- LB8S-33T6 -- 3PDT LB3S-33T7 -- LB8S-33T7 -- ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** For dimensions, see page 31 and 32. Contact Operation Operator Position & Contact Operation (Top View) Position Contact Left Center Right NO1 NC1 NO1 NC1 SPDT C1 L 90 2-position L R C1 Left Right NO1 NC1 NO2 NC2 R Left Right NO1 NC1 NO2 NC2 DPDT Maintained Spring return from right C1 C2 C1 C2 Left Center Right NO1 NC1 NO2NC2 NO3 NC3 Left Center Right NO1 NC1 NO2 NC2 NO3 NC3 3PDT C1 C2 C3 Left Right NO1 NC1 NO2 NC2 L 45 3-position 18 C R L C R L C R L C R Spring return from right Spring return from left Spring return two-way C2 C3 Left Right NO1 NC1 NO2 NC2 DPDT C1 Maintained C1 Left Right NO1 NC1 NO2 NC2 C2 C1 C2 C1 C2 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 C1 C1 C1 3PDT C2 C3 C2 C3 C2 C3 LB Series Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Round LB1K Key retained at Contact Gold A L R Silver Gold Maintained B L R Gold Flush Bezel Round LB6K C L R Silver Spring return from right Metal Bezel Gold B L R Silver L C Gold R Silver Black Bezel B L C Gold R Silver C L C Gold R Silver 45 3-position Maintained D L C Gold R Silver L C Gold R Silver G L C Gold R Silver H L C Gold R Silver Key Selector Switches ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used with A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB1K-2T1A ** Besides the standard key (key number 0H), six other keys are available. To order other keys, specify the key number as shown below: Selector Switches E Pushbuttons A Flush Bezel Solder/Tab PC Board Terminal Terminal LB6K-2ST1A LB6K-2ST1VA LB6K-2ST2A LB6K-2ST2VA LB6K-2ST3A LB6K-2ST3VA LB6K-2ST5A -- LB6K-2ST6A -- LB6K-2ST7A -- LB6K-2ST1B LB6K-2ST1VB LB6K-2ST2B LB6K-2ST2VB LB6K-2ST3B LB6K-2ST3VB LB6K-2ST5B -- LB6K-2ST6B -- LB6K-2ST7B -- LB6K-2ST1C LB6K-2ST1VC LB6K-2ST2C LB6K-2ST2VC LB6K-2ST3C LB6K-2ST3VC LB6K-2ST5C -- LB6K-2ST6C -- LB6K-2ST7C -- LB6K-21ST1B LB6K-21ST1VB LB6K-21ST2B LB6K-21ST2VB LB6K-21ST3B LB6K-21ST3VB LB6K-21ST5B -- LB6K-21ST6B -- LB6K-21ST7B -- LB6K-3ST2A LB6K-3ST2VA LB6K-3ST3A LB6K-3ST3VA LB6K-3ST6A -- LB6K-3ST7A -- LB6K-3ST2B LB6K-3ST2VB LB6K-3ST3B LB6K-3ST3VB LB6K-3ST6B -- LB6K-3ST7B -- LB6K-3ST2C LB6K-3ST2VC LB6K-3ST3C LB6K-3ST3VC LB6K-3ST6C -- LB6K-3ST7C -- LB6K-3ST2D LB6K-3ST2VD LB6K-3ST3D LB6K-3ST3VD LB6K-3ST6D -- LB6K-3ST7D -- LB6K-3ST2E LB6K-3ST2VE LB6K-3ST3E LB6K-3ST3VE LB6K-3ST6E -- LB6K-3ST7E -- LB6K-3ST2G LB6K-3ST2VG LB6K-3ST3G LB6K-3ST3VG LB6K-3ST6G -- LB6K-3ST7G -- LB6K-3ST2H LB6K-3ST2VH LB6K-3ST3H LB6K-3ST3VH LB6K-3ST6H -- LB6K-3ST7H -- Pilot Lights Silver 90 2-position SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB1K-2ST1A LB1K-2ST1VA LB1K-2ST2A LB1K-2ST2VA LB1K-2ST3A LB1K-2ST3VA LB1K-2ST5A -- LB1K-2ST6A -- LB1K-2ST7A -- LB1K-2ST1B LB1K-2ST1VB LB1K-2ST2B LB1K-2ST2VB LB1K-2ST3B LB1K-2ST3VB LB1K-2ST5B -- LB1K-2ST6B -- LB1K-2ST7B -- LB1K-2ST1C LB1K-2ST1VC LB1K-2ST2C LB1K-2ST2VC LB1K-2ST3C LB1K-2ST3VC LB1K-2ST5C -- LB1K-2ST6C -- LB1K-2ST7C -- LB1K-21ST1B LB1K-21ST1VB LB1K-21ST2B LB1K-21ST2VB LB1K-21ST3B LB1K-21ST3VB LB1K-21ST5B -- LB1K-21ST6B -- LB1K-21ST7B -- LB1K-3ST2A LB1K-3ST2VA LB1K-3ST3A LB1K-3ST3VA LB1K-3ST6A -- LB1K-3ST7A -- LB1K-3ST2B LB1K-3ST2VB LB1K-3ST3B LB1K-3ST3VB LB1K-3ST6B -- LB1K-3ST7B -- LB1K-3ST2C LB1K-3ST2VC LB1K-3ST3C LB1K-3ST3VC LB1K-3ST6C -- LB1K-3ST7C -- LB1K-3ST2D LB1K-3ST2VD LB1K-3ST3D LB1K-3ST3VD LB1K-3ST6D -- LB1K-3ST7D -- LB1K-3ST2E LB1K-3ST2VE LB1K-3ST3E LB1K-3ST3VE LB1K-3ST6E -- LB1K-3ST7E -- LB1K-3ST2G LB1K-3ST2VG LB1K-3ST3G LB1K-3ST3VG LB1K-3ST6G -- LB1K-3ST7G -- LB1K-3ST2H LB1K-3ST2VH LB1K-3ST3H LB1K-3ST3VH LB1K-3ST6H -- LB1K-3ST7H -- Illuminated Pushbuttons Round Key Selector Switches Example: LB1K-2ST1A-1H (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. 19 LB Series Key Selector Switches Round Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Round LB1K Key retained at L B C Contact Gold R Silver Spring return from right Flush Bezel Round LB6K L D C Gold R Silver L G C Gold R Silver 45 3-position L C C Gold R Silver Metal Bezel Spring return from left L D Gold R Silver L H Black Bezel C C Gold R Silver Spring return two-way L D C Gold R Silver DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB1K-31ST2B LB1K-31ST2VB LB1K-31ST3B LB1K-31ST3VB LB1K-31ST6B -- LB1K-31ST7B -- LB1K-31ST2D LB1K-31ST2VD LB1K-31ST3D LB1K-31ST3VD LB1K-31ST6D -- LB1K-31ST7D -- LB1K-31ST2G LB1K-31ST2VG LB1K-31ST3G LB1K-31ST3VG LB1K-31ST6G -- LB1K-31ST7G -- LB1K-32ST2C LB1K-32ST2VC LB1K-32ST3C LB1K-32ST3VC LB1K-32ST6C -- LB1K-32ST7C -- LB1K-32ST2D LB1K-32ST2VD LB1K-32ST3D LB1K-32ST3VD LB1K-32ST6D -- LB1K-32ST7D -- LB1K-32ST2H LB1K-32ST2VH LB1K-32ST3H LB1K-32ST3VH LB1K-32ST6H -- LB1K-32ST7H -- LB1K-33ST2D LB1K-33ST2VD LB1K-33ST3D LB1K-33ST3VD LB1K-33ST6D -- LB1K-33ST7D -- Flush Bezel Solder/Tab PC Board Terminal Terminal LB6K-31ST2B LB6K-31ST2VB LB6K-31ST3B LB6K-31ST3VB LB6K-31ST6B -- LB6K-31ST7B -- LB6K-31ST2D LB6K-31ST2VD LB6K-31ST3D LB6K-31ST3VD LB6K-31ST6D -- LB6K-31ST7D -- LB6K-31ST2G LB6K-31ST2VG LB6K-31ST3G LB6K-31ST3VG LB6K-31ST6G -- LB6K-31ST7G -- LB6K-32ST2C LB6K-32ST2VC LB6K-32ST3C LB6K-32ST3VC LB6K-32ST6C -- LB6K-32ST7C -- LB6K-32ST2D LB6K-32ST2VD LB6K-32ST3D LB6K-32ST3VD LB6K-32ST6D -- LB6K-32ST7D -- LB6K-32ST2H LB6K-32ST2VH LB6K-32ST3H LB6K-32ST3VH LB6K-32ST6H -- LB6K-32ST7H -- LB6K-33ST2D LB6K-33ST2VD LB6K-33ST3D LB6K-33ST3VD LB6K-33ST6D -- LB6K-33ST7D -- ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used for A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB1K-31T2B ** Besides the standard key (key number 0H), six other keys are available. To order other keys, specify the key number as shown below: Example: LB1K-2ST2B-1H Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Contact Operation Operator Position & Contact Operation (Top View) Position Contact Left Center Right NO1 NC1 NO1 NC1 SPDT C1 L 90 2-position L R C1 Left Right NO1 NC1 NO2 NC2 R Left Right NO1 NC1 NO2 NC2 DPDT Maintained Spring return from right C1 C2 C1 C2 Left Center Right NO1 NC1 NO2NC2 NO3 NC3 Left Center Right NO1 NC1 NO2 NC2 NO3 NC3 3PDT C1 C2 C3 Left Right NO1 NC1 NO2 NC2 L 45 3-position 20 C R L C R L C R L C R Spring return from right Spring return from left Spring return two-way C2 C3 Left Right NO1 NC1 NO2 NC2 DPDT C1 Maintained C1 Left Right NO1 NC1 NO2 NC2 C2 C1 C2 C1 C2 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 C1 C1 C1 3PDT C2 C3 C2 C3 C2 C3 LB Series Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Key retained at Operator Position Standard Bezel Square LB2K Contact Gold A L R Silver Gold Maintained B L R Gold C Flush Bezel Square LB7K L R Silver Gold Spring return from right B L R Silver Metal Bezel L C R Gold Silver B Black Bezel L C Gold R Silver C L C Gold R Silver D L C Gold R Silver E L C Gold R Silver G L C Gold R Silver H L C Gold R Silver Key Selector Switches ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used for A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB2K-2T1A ** Besides the standard key (key number 0H) six other keys are available. To order other keys, specify the key number as shown below: Example: LB2K-2ST1A-1H (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Selector Switches 45 3-position Maintained Pushbuttons A Flush Bezel Solder/Tab PC Board Terminal Terminal LB7K-2ST1A LB7K-2ST1VA LB7K-2ST2A LB7K-2ST2VA LB7K-2ST3A LB7K-2ST3VA LB7K-2ST5A -- LB7K-2ST6A -- LB7K-2ST7A -- LB7K-2ST1B LB7K-2ST1VB LB7K-2ST2B LB7K-2ST2VB LB7K-2ST3B LB7K-2ST3VB LB7K-2ST5B -- LB7K-2ST6B -- LB7K-2ST7B -- LB7K-2ST1C LB7K-2ST1VC LB7K-2ST2C LB7K-2ST2VC LB7K-2ST3C LB7K-2ST3VC LB7K-2ST5C -- LB7K-2ST6C -- LB7K-2ST7C -- LB7K-21ST1B LB7K-21ST1VB LB7K-21ST2B LB7K-21ST2VB LB7K-21ST3B LB7K-21ST3VB LB7K-21ST5B -- LB7K-21ST6B -- LB7K-21ST7B -- LB7K-3ST2A LB7K-3ST2VA LB7K-3ST3A LB7K-3ST3VA LB7K-3ST6A -- LB7K-3ST7A -- LB7K-3ST2B LB7K-3ST2VB LB7K-3ST3B LB7K-3ST3VB LB7K-3ST6B -- LB7K-3ST7B -- LB7K-3ST2C LB7K-3ST2VC LB7K-3ST3C LB7K-3ST3VC LB7K-3ST6C -- LB7K-3ST7C -- LB7K-3ST2D LB7K-3ST2VD LB7K-3ST3D LB7K-3ST3VD LB7K-3ST6D -- LB7K-3ST7D -- LB7K-3ST2E LB7K-3ST2VE LB7K-3ST3E LB7K-3ST3VE LB7K-3ST6E -- LB7K-3ST7E -- LB7K-3ST2G LB7K-3ST2VG LB7K-3ST3G LB7K-3ST3VG LB7K-3ST6G -- LB7K-3ST7G -- LB7K-3ST2H LB7K-3ST2VH LB7K-3ST3H LB7K-3ST3VH LB7K-3ST6H -- LB7K-3ST7H -- Pilot Lights Silver 90 2-position SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB2K-2ST1A LB2K-2ST1VA LB2K-2ST2A LB2K-2ST2VA LB2K-2ST3A LB2K-2ST3VA LB2K-2ST5A -- LB2K-2ST6A -- LB2K-2ST7A -- LB2K-2ST1B LB2K-2ST1VB LB2K-2ST2B LB2K-2ST2VB LB2K-2ST3B LB2K-2ST3VB LB2K-2ST5B -- LB2K-2ST6B -- LB2K-2ST7B -- LB2K-2ST1C LB2K-2ST1VC LB2K-2ST2C LB2K-2ST2VC LB2K-2ST3C LB2K-2ST3VC LB2K-2ST5C -- LB2K-2ST6C -- LB2K-2ST7C -- LB2K-21ST1B LB2K-21ST1VB LB2K-21ST2B LB2K-21ST2VB LB2K-21ST3B LB2K-21ST3VB LB2K-21ST5B -- LB2K-21ST6B -- LB2K-21ST7B -- LB2K-3ST2A LB2K-3ST2VA LB2K-3ST3A LB2K-3ST3VA LB2K-3ST6A -- LB2K-3ST7A -- LB2K-3ST2B LB2K-3ST2VB LB2K-3ST3B LB2K-3ST3VB LB2K-3ST6B -- LB2K-3ST7B -- LB2K-3ST2C LB2K-3ST2VC LB2K-3ST3C LB2K-3ST3VC LB2K-3ST6C -- LB2K-3ST7C -- LB2K-3ST2D LB2K-3ST2VD LB2K-3ST3D LB2K-3ST3VD LB2K-3ST6D -- LB2K-3ST7D -- LB2K-3ST2E LB2K-3ST2VE LB2K-3ST3E LB2K-3ST3VE LB2K-3ST6E -- LB2K-3ST7E -- LB2K-3ST2G LB2K-3ST2VG LB2K-3ST3G LB2K-3ST3VG LB2K-3ST6G -- LB2K-3ST7G -- LB2K-3ST2H LB2K-3ST2VH LB2K-3ST3H LB2K-3ST3VH LB2K-3ST6H -- LB2K-3ST7H -- Illuminated Pushbuttons Square Key Selector Switches Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. 21 LB Series Key Selector Switches Square Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Square LB2K Key retained at B L Contact Gold C R Silver Spring return from right Flush Bezel Square LB7K L D Gold C R Silver L G C R Gold Silver 45 3-position L C Gold C R Silver Spring return from left Metal Bezel D L Gold C R Silver L H Gold C R Silver Black Bezel Spring return two-way L D C R Gold Silver DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB2K-31ST2B LB2K-31ST2VB LB2K-31ST3B LB2K-31ST3VB LB2K-31ST6B -- LB2K-31ST7B -- LB2K-31ST2D LB2K-31ST2VD LB2K-31ST3D LB2K-31ST3VD LB2K-31ST6D -- LB2K-31ST7D -- LB2K-31ST2G LB2K-31ST2VG LB2K-31ST3G LB2K-31ST3VG LB2K-31ST6G -- LB2K-31ST7G -- LB2K-32ST2C LB2K-32ST2VC LB2K-32ST3C LB2K-32ST3VC LB2K-32ST6C -- LB2K-32ST7C -- LB2K-32ST2D LB2K-32ST2VD LB2K-32ST3D LB2K-32ST3VD LB2K-32ST6D -- LB2K-32ST7D -- LB2K-32ST2H LB2K-32ST2VH LB2K-32ST3H LB2K-32ST3VH LB2K-32ST6H -- LB2K-32ST7H -- LB2K-33ST2D LB2K-33ST2VD LB2K-33ST3D LB2K-33ST3VD LB2K-33ST6D -- LB2K-33ST7D -- Flush Bezel Solder/Tab PC Board Terminal Terminal LB7K-31ST2B LB7K-31ST2VB LB7K-31ST3B LB7K-31ST3VB LB7K-31ST6B -- LB7K-31ST7B -- LB7K-31ST2D LB7K-31ST2VD LB7K-31ST3D LB7K-31ST3VD LB7K-31ST6D -- LB7K-31ST7D -- LB7K-31ST2G LB7K-31ST2VG LB7K-31ST3G LB7K-31ST3VG LB7K-31ST6G -- LB7K-31ST7G -- LB7K-32ST2C LB7K-32ST2VC LB7K-32ST3C LB7K-32ST3VC LB7K-32ST6C -- LB7K-32ST7C -- LB7K-32ST2D LB7K-32ST2VD LB7K-32ST3D LB7K-32ST3VD LB7K-32ST6D -- LB7K-32ST7D -- LB7K-32ST2H LB7K-32ST2VH LB7K-32ST3H LB7K-32ST3VH LB7K-32ST6H -- LB7K-32ST7H -- LB7K-33ST2D LB7K-33ST2VD LB7K-33ST3D LB7K-33ST3VD LB7K-33ST6D -- LB7K-33ST7D -- ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used for A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB2K-31T2B ** Besides the standard key (key number 0H) six other keys are available. To order other keys, specify the key number as shown below: Example: LB2K-2ST1B-1H Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Contact Operation Operator Position & Contact Operation (Top View) Position Contact Left Center Right NO1 NC1 NO1 NC1 SPDT C1 C1 L 90 2-position R L Left Right NO1 NC1 NO2 NC2 R Left Right NO1 NC1 NO2 NC2 DPDT Maintained Spring return from right C1 C2 C1 C2 Left Center Right NO1 NC1 NO2NC2 NO3 NC3 Left Center Right NO1 NC1 NO2 NC2 NO3 NC3 3PDT C1 C2 C3 Left Right NO1 NC1 NO2 NC2 L 45 3-position 22 C R L C R L C R L C R Spring return from right Spring return from left Spring return two-way C2 C3 Left Right NO1 NC1 NO2 NC2 DPDT C1 Maintained C1 Left Right NO1 NC1 NO2 NC2 C2 C1 C2 C1 C2 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 C1 C1 C1 3PDT C2 C3 C2 C3 C2 C3 LB Series Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Rectangular LB3K Key retained at Contact Gold A L R Silver Gold Maintained B L R Gold C L R Silver Flush Bezel Rectangular LB8K Gold Spring return from right B R Silver L C Gold R Silver B L C R Gold Silver Black Bezel C L C Gold R Silver D L C R Gold Silver E L C R Gold Silver G L C R Gold Silver H L C Gold R Silver Key Selector Switches ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used for A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB3K-2T1A ** Besides the standard key (key number 0H) six other keys are available. To order other keys, specify the key number as shown below: Example: LB3K-2ST1A-1H (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Selector Switches 45 3-position Maintained Pushbuttons A Metal Bezel L Flush Bezel Solder/Tab PC Board Terminal Terminal LB8K-2ST1A LB8K-2ST1VA LB8K-2ST2A LB8K-2ST2VA LB8K-2ST3A LB8K-2ST3VA LB8K-2ST5A -- LB8K-2ST6A -- LB8K-2ST7A -- LB8K-2ST1B LB8K-2ST1VB LB8K-2ST2B LB8K-2ST2VB LB8K-2ST3B LB8K-2ST3VB LB8K-2ST5B -- LB8K-2ST6B -- LB8K-2ST7B -- LB8K-2ST1C LB8K-2ST1VC LB8K-2ST2C LB8K-2ST2VC LB8K-2ST3C LB8K-2ST3VC LB8K-2ST5C -- LB8K-2ST6C -- LB8K-2ST7C -- LB8K-21ST1B LB8K-21ST1VB LB8K-21ST2B LB8K-21ST2VB LB8K-21ST3B LB8K-21ST3VB LB8K-21ST5B -- LB8K-21ST6B -- LB8K-21ST7B -- LB8K-3ST2A LB8K-3ST2VA LB8K-3ST3A LB8K-3ST3VA LB8K-3ST6A -- LB8K-3ST7A -- LB8K-3ST2B LB8K-3ST2VB LB8K-3ST3B LB8K-3ST3VB LB8K-3ST6B -- LB8K-3ST7B -- LB8K-3ST2C LB8K-3ST2VC LB8K-3ST3C LB8K-3ST3VC LB8K-3ST6C -- LB8K-3ST7C -- LB8K-3ST2D LB8K-3ST2VD LB8K-3ST3D LB8K-3ST3VD LB8K-3ST6D -- LB8K-3ST7D -- LB8K-3ST2E LB8K-3ST2VE LB8K-3ST3E LB8K-3ST3VE LB8K-3ST6E -- LB8K-3ST7E -- LB8K-3ST2G LB8K-3ST2VG LB8K-3ST3G LB8K-3ST3VG LB8K-3ST6G -- LB8K-3ST7G -- LB8K-3ST2H LB8K-3ST2VH LB8K-3ST3H LB8K-3ST3VH LB8K-3ST6H -- LB8K-3ST7H -- Pilot Lights Silver 90 2-position SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB3K-2ST1A LB3K-2ST1VA LB3K-2ST2A LB3K-2ST2VA LB3K-2ST3A LB3K-2ST3VA LB3K-2ST5A -- LB3K-2ST6A -- LB3K-2ST7A -- LB3K-2ST1B LB3K-2ST1VB LB3K-2ST2B LB3K-2ST2VB LB3K-2ST3B LB3K-2ST3VB LB3K-2ST5B -- LB3K-2ST6B -- LB3K-2ST7B -- LB3K-2ST1C LB3K-2ST1VC LB3K-2ST2C LB3K-2ST2VC LB3K-2ST3C LB3K-2ST3VC LB3K-2ST5C -- LB3K-2ST6C -- LB3K-2ST7C -- LB3K-21ST1B LB3K-21ST1VB LB3K-21ST2B LB3K-21ST2VB LB3K-21ST3B LB3K-21ST3VB LB3K-21ST5B -- LB3K-21ST6B -- LB3K-21ST7B -- LB3K-3ST2A LB3K-3ST2VA LB3K-3ST3A LB3K-3ST3VA LB3K-3ST6A -- LB3K-3ST7A -- LB3K-3ST2B LB3K-3ST2VB LB3K-3ST3B LB3K-3ST3VB LB3K-3ST6B -- LB3K-3ST7B -- LB3K-3ST2C LB3K-3ST2VC LB3K-3ST3C LB3K-3ST3VC LB3K-3ST6C -- LB3K-3ST7C -- LB3K-3ST2D LB3K-3ST2VD LB3K-3ST3D LB3K-3ST3VD LB3K-3ST6D -- LB3K-3ST7D -- LB3K-3ST2E LB3K-3ST2VE LB3K-3ST3E LB3K-3ST3VE LB3K-3ST6E -- LB3K-3ST7E -- LB3K-3ST2G LB3K-3ST2VG LB3K-3ST3G LB3K-3ST3VG LB3K-3ST6G -- LB3K-3ST7G -- LB3K-3ST2H LB3K-3ST2VH LB3K-3ST3H LB3K-3ST3VH LB3K-3ST6H -- LB3K-3ST7H -- Illuminated Pushbuttons Round Key Selector Switches Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. 23 LB Series Key Selector Switches Round Key Selector Switches Package Quantity: 1 Part No. (Ordering No.) Shape Operator Position Standard Bezel Rectangular LB3K Key retained at L B C R Contact Gold Silver Spring return from right Flush Bezel Rectangular LB8K L D C R Gold Silver L G C R Gold Silver 45 3-position L C C R Gold Silver Spring return from left Metal Bezel L D C R Gold Silver L H C R Gold Silver Black Bezel Spring return two-way L D C R Gold Silver DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Standard Bezel Solder/Tab PC Board Terminal Terminal LB3K-31ST2B LB3K-31ST2VB LB3K-31ST3B LB3K-31ST3VB LB3K-31ST6B -- LB3K-31ST7B -- LB3K-31ST2D LB3K-31ST2VD LB3K-31ST3D LB3K-31ST3VD LB3K-31ST6D -- LB3K-31ST7D -- LB3K-31ST2G LB3K-31ST2VG LB3K-31ST3G LB3K-31ST3VG LB3K-31ST6G -- LB3K-31ST7G -- LB3K-32ST2C LB3K-32ST2VC LB3K-32ST3C LB3K-32ST3VC LB3K-32ST6C -- LB3K-32ST7C -- LB3K-32ST2D LB3K-32ST2VD LB3K-32ST3D LB3K-32ST3VD LB3K-32ST6D -- LB3K-32ST7D -- LB3K-32ST2H LB3K-32ST2VH LB3K-32ST3H LB3K-32ST3VH LB3K-32ST6H -- LB3K-32ST7H -- LB3K-33ST2D LB3K-33ST2VD LB3K-33ST3D LB3K-33ST3VD LB3K-33ST6D -- LB3K-33ST7D -- Flush Bezel Solder/Tab PC Board Terminal Terminal LB8K-31ST2B LB8K-31ST2VB LB8K-31ST3B LB8K-31ST3VB -- LB8K-31ST6B -- LB8K-31ST7B LB8K-31ST2D LB8K-31ST2VD LB8K-31ST3D LB8K-31ST3VD -- LB8K-31ST6D -- LB8K-31ST7D LB8K-31ST2G LB8K-31ST2VG LB8K-31ST3G LB8K-31ST3VG -- LB8K-31ST6G -- LB8K-31ST7G LB8K-32ST2C LB8K-32ST2VC LB8K-32ST3C LB8K-32ST3VC -- LB8K-32ST6C -- LB8K-32ST7C LB8K-32ST2D LB8K-32ST2VD LB8K-32ST3D LB8K-32ST3VD -- LB8K-32ST6D -- LB8K-32ST7D LB8K-32ST2H LB8K-32ST2VH LB8K-32ST3H LB8K-32ST3VH -- LB8K-32ST6H -- LB8K-32ST7H LB8K-33ST2D LB8K-33ST2VD LB8K-33ST3D LB8K-33ST3VD -- LB8K-33ST6D -- LB8K-33ST7D ** Specify the bezel color in place of in the Part No.: M (metal), Blank (black) ** Key is retained at and removable at positions. ** Two keys are supplied. ** For dimensions, see page 33 and 34. ** Pin tumbler keys also available. (The key AS6-SK-132 is also used for A6/L6 series key selector switches.) Remove the letter "S" before the "T" from the part no. Example: LB3K-31T2B ** Besides the standard key (key number 0H) six other keys are available. To order other keys, specify the key number as shown below: Example: LB2K-31ST1B-1H Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. (blank): Standard key (0H) 1H to 2H: Reversible key 3H to 6H: Non-reversible key Contact Operation Operator Position & Contact Operation (Top View) Position Contact Left Center Right NO1 NC1 NO1 NC1 SPDT C1 L 90 2-position R L C1 Left Right NO1 NC1 NO2 NC2 R Left Right NO1 NC1 NO2 NC2 DPDT Maintained Spring return from right C1 C2 C1 C2 Left Center Right NO1 NC1 NO2NC2 NO3 NC3 Left Center Right NO1 NC1 NO2 NC2 NO3 NC3 3PDT C1 C2 C3 Left Right NO1 NC1 NO2 NC2 L 45 3-position 24 C R L C R L C R L C R Spring return from right Spring return from left Spring return two-way C2 C3 Left Right NO1 NC1 NO2 NC2 DPDT C1 Maintained C1 Left Right NO1 NC1 NO2 NC2 C2 C1 C2 C1 C2 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 Left Center Right NO1NC1 NO2NC2 NO3NC3 C1 C1 C1 3PDT C2 C3 C2 C3 C2 C3 LB Series Dimensions Mounting Hole Layout / PC Board Drilling Layout Mounting Hole Layout 8. +0 .2 0 2 18.2 +0 0 .2 18 1 Flush Bezel / Rectangular +0.2 0 22 2 18 2 6.2 22 2 o1 o1 Flush Bezel / Square 18.2 +0.2 0 Flush Bezel / Round 24.2 +0.2 0 22 2 Standard Bezel 22 1 28 22 1 *1 3PDT: 23.2 mm *2 Switches with Guard: 45 mm Note: When using the LB series with a rubber boot or terminal cover, make sure to note the dimensions on page 37 and 38. *1 Rectangular: 24 mm 3PDT: 23.2 mm *2 3PDT: 21 mm Notes for Designing PC Board and Circuit **Use 1.6-mm-thick glass epoxy PC board with drilled holes. **Design a circuit so that the LB series can operate within the rated voltage and current range. Make sure that inrush current and voltage do not exceed the rating. **Minimum applicable load is 5V AC/DC, 1 mA on gold contacts. Applicable range is subject to the operating condition and load. **Since the *2.8-mm-wide terminal touches the PC board as shown on the right, short circuit may occur with pattern lines. Design a circuit that prevents short circuits. 8 (0.5) (0.5) 2.8 2.8 2.8 2.8 2.8 2.8 Soldered Soldered Side Side Mounting Mounting Side Side 1.6 (PC1.6 Board) (PC Board) 5 2.4 2.4 SW Terminal SW Terminal (0.8) (0.8) SW Terminal SW Terminal SW Terminal SW Terminal 9 9- -o1 o1 .2 .2 +0 +0 0 .1 0 .1 5 5 5 NC Terminal NC Terminal NO Terminal NO Terminal COM Terminal COM Terminal Mounting Mounting Side Side 2.8 2.8 2.8 2.8 8 (0.8) (0.8) (0.8) (0.8) 8 2.4 2.4 8 2.4 2.4 6.0 6.0 Soldered Soldered Side Side 3PDT Contacts (0.5) (0.5) (0.5) (0.5) 2.4 2.4 5 5 5 5 NC Terminal NC Terminal NO Terminal NO Terminal COM Terminal COM Terminal SW Terminal SW Terminal DPDT DPDT Lamp Terminal Lamp Terminal SW Terminal SW Terminal SPDT SPDT (0.8) (0.8) 9 9- -o1 o1 .2 + .2 +0 0 0.1 0 .1 (0.8) (0.8) Lamp Terminal (+) LampTerminal Terminal(-) (+) Lamp Lamp Terminal (-) 1.6 1.6 (PC Board) (PC Board) 1.6 1.6 (PC Board) (PC Board) 2.8 2.8 4.0 4.0 (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) 6.95 (0.5) 6.95 (0.5) 2.8 2.8 3.85 (0.5) 3.85 (0.5) (0.5) (0.5) 2.8 2.8 SPDT/DPDT Contacts Mounting Mounting Side Side Soldered Soldered Side Side PC Board Drilling Layout (Bottom View) .2 o1 8- le ho r d ng ve ir lle rati g le ) 3 d e in o6 op ck ote 0.5 for e lo (N th o (N te 5 9.3 3PDT Contacts 9- o1 .2 (N ot e 1.45 2) le ho r ed g rill ratin leve d o6 ope king te 3) r fo e loc (No th 5 SPDT/DPDT Contacts 6.95 1 (Note 1) 1 ( Note 1) 5 5 10 2) 3.85 1.95 (Note 1) 8 8 All dimensions in mm. Note 1: When designing, note the alignment of centerlines of the contact blocks and centerlines of the operators. Note 2: The diameter of the terminal hole is o1.2. Note 3: Hole diameter may vary to meet installation requirements. Determine the location and the size of the hole so that the locking lever can be operated. 25 LB Series Dimensions Dimensions for Illuminated Pushbuttons Standard Bezel Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Round 8 o1 3.85 3.85 5.7 6.95 6.95 Square Mounting Plate 0.6 18 0.8W x 0.5t LOCK Rectangular 2.6 18 6 1 1 2 5.5 17.8 PC Board Terminal 8.8 7 20.9 24 Panel Thickness: 0.5 to 3.2 mm SPDT/DPDT Contacts Gasket Locking Ring 2-R0.6 9 Solder/Tab Terminal Solder/Tab Terminal Flush Bezel Round 2 o2 3.85 3.85 1.2 3 6 5 5 17.8 15.8 3 1 2.8W x 0.5t Square 6.95 6.95 Mounting Bracket 22 0.8W x 0.5t LOCK 2.6 1 6 22 6 1 5 5 3 1 3 17.8 15.8 Rectangular 2.8W x 0.5t 7 PC Board Terminal 27.9 28 2 2-R0.6 1.2 2 5.5 17.8 Solder/Tab Terminal Solder/Tab Terminal Switch with Guard Panel Thickness: 0.5 to 3.2 mm Round Gasket Square 11 22.5 Mounting Bracket 6.95 6.95 11 22.5 o22 3.85 3.85 Locking Ring 24.2 22 0.8W x 0.5t 2.8W x 0.5t 1 2.6 1 PC Board Terminal * For details on terminal arrangement, see page 27. * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 2 7 27.9 Solder/Tab Terminal 5.2 28 1.2 2 5.5 11 22.5 30.4 6 5 5 3 17.8 15.8 17.8 26 Rectangular 6 1 3 LOCK 2-R0.6 Solder/Tab Terminal All dimensions in mm. LB Series Dimensions Dimensions for Pilot Lights Standard Bezel Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Round 5.7 8 o1 Square Mounting Plate 0.6 0.8W x 0.5t 18 2.8W x 0.5t Rectangular 1 2.6 3 2 5.5 17.8 8.8 7 PC Board Terminal 20.9 1.2 3 3 18 17.8 15.8 3 LOCK 24 Solder/Tab Terminal Solder/Tab Terminal Panel Thickness: 0.5 to 3.2 mm Flush Bezel Round Gasket SPDT/DPDT Contacts 2-R0.6 9 2 o2 3.85 Locking Ring Square 6.95 Mounting Bracket 22 0.8W x 0.5t LOCK Rectangular 2.6 2 5.5 17.8 PC Board Terminal 7 27.9 28 2 1.2 3 6 22 6 3 17.8 15.8 1 1 2.8W x 0.5t 2-R0.6 Solder/Tab Terminal Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) Illuminated Pushbuttons Lamp Terminal (+) Pilot Lights TOP 22 TOP 12 X1 24 Lamp Terminal (-) 14 X2 21 Lamp Terminal (+) Lamp Terminal (-) X1 X2 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 27 LB Series Dimensions Dimensions for Pushbuttons Standard Bezel SPDT/DPDT Contacts Panel Thickness: 0.5 to 3.2 mm 3.85 3.85 6.95 6.95 Gasket Locking Ring Round 8 o1 5.7 Square Mounting Plate 0.6 18 0.8W x 0.5t 2.8W x 0.5t Rectangular 1.2 2 5.5 17.8 8.8 7 20.9 24 3PDT Contacts 8 Round o1 1.95 5.7 Square 8 8 8 1.95 Solder/Tab Terminal 9 Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 8 2-R0.6 Solder/Tab Terminal PC Board Terminal Mounting Plate 0.6 18 0.8W x 0.5t 2.8W x 0.5t Rectangular 1 1 18 2.6 1.2 6 5 5 6 1 LOCK 20.8 18.8 11.9 2.6 18 6 1 1 6 5 5 17.8 15.8 1 LOCK 11.1 2 23 8.8 7 5.5 PC Board Terminal 20.9 2-R0.6 Solder/Tab Terminal 24 9 Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 28 LB Series Dimensions Dimensions for Pushbuttons Flush Bezel Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Round 2 o2 3.85 3.85 SPDT/DPDT Contacts Mounting Bracket 6.95 6.95 Square 22 0.8W x 0.5t 2.8W x 0.5t 1 2.6 1 22 * 1.2 6 5 5 17.8 15.8 Rectangular 6 1 LOCK 2 5.5 17.8 PC Board Terminal 7 27.9 2-R0.6 28 2 Solder/Tab Terminal Solder/Tab Terminal 3PDT Contacts Panel Thickness: 0.5 to 3.2 mm Round Gasket 2 o2 8 8 1.95 8 8 1.95 Locking Ring Square Mounting Bracket 0.8W x 0.5t 22 LOCK Rectangular 22 6 1.2 11.1 2 5.5 23 2.6 1 1 6 20.8 18.8 11.9 5 5 1 2.8W x 0.5t PC Board Terminal 28 7 2 27.9 2-R0.6 Solder/Tab Terminal Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 29 LB Series Dimensions Dimensions for Pushbuttons Switch with Guard SPDT/DPDT Contacts Round 11 22.5 o22 3.85 3.85 Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 11 22.5 6.95 6.95 Square Mounting Bracket 24.2 0.8W x 0.5t 22 2.8W x 0.5t 1 2.6 2 7 28 5.2 27.9 2-R0.6 1.2 30.4 6 Solder/Tab Terminal Solder/Tab Terminal PC Board Terminal Switch with Guard 3PDT Contacts Round o22 8 8 8 8 11 1.95 1.95 Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 22.5 2 5.5 17.8 11 22.5 6 1 5 5 17.8 15.8 Rectangular 1 LOCK Square 11 24.2 22 0.8W x 0.5t 2.8W x 0.5t 1 2.6 PC Board Terminal 27.9 2-R0.6 28 2 7 1.2 11 22.5 30.4 6 6 1 5 5 20.8 18.8 11.9 2 5.5 23 Rectangular 1 LOCK 11.1 22.5 Mounting Bracket Solder/Tab Terminal 5.2 Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 30 LB Series Dimensions Dimensions for Selector Switches Standard Bezel SPDT/DPDT Contacts Panel Thickness: 0.5 to 3.2 mm 3.85 3.85 6.95 6.95 Gasket Locking Ring 8 Round o1 Square Mounting Plate 0.6 18 0.8W x 0.5t 2.8W x 0.5t Rectangular 2.6 18 6 1 1 1.2 6 5 5 17.8 15.8 1 LOCK 2 5.5 17.8 8.8 PC Board Terminal 7 8.7 20.9 24 2-R0.6 Solder/Tab Terminal 15.5 Solder/Tab Terminal 3PDT Contacts Panel Thickness: 0.5 to 3.2 mm Round Gasket 8 o1 8 8 8 8 1.95 1.95 Locking Ring Square Mounting Plate 0.6 18 0.8W x 0.5t LOCK 2.8W x 0.5t 2.6 18 1.2 6 2 5.5 23 1 1 6 1 5 5 20.8 18.8 11.9 11.1 Rectangular PC Board Terminal 8.8 7 8.7 20.9 24 2-R0.6 Solder/Tab Terminal 15.5 Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 31 LB Series Dimensions Dimensions for Selector Switches Flush Bezel Panel Thickness: 0.5 to 3.2 mm SPDT/DPDT Contacts Round 2 o2 3.85 3.85 Gasket Locking Ring Square 6.95 6.95 Mounting Bracket 0.8W x 0.5t 22 2.8W x 0.5t 1 2.6 22 6 6 5 5 2 5.5 17.8 2 PC Board Terminal 7 28 8.5 27.9 2-R0.6 1.2 17.8 15.8 Rectangular 1 1 LOCK Solder/Tab Terminal Solder/Tab Terminal 8 8 8 8 1.95 1.95 3PDT Contacts Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Round 2 o2 Square Mounting Bracket 0.8W x 0.5t 22 2.8W x 0.5t Rectangular 22 6 1.2 11.1 2 5.5 23 2.6 1 1 6 20.8 18.8 11.9 5 5 1 LOCK PC Board Terminal 2 7 28 8.5 27.9 2-R0.6 Solder/Tab Terminal Solder/Tab Terminal All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 32 LB Series Dimensions Dimensions for Key Selector Switches Standard Bezel SPDT/DPDT Contacts 8 o1 3.85 3.85 Round Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Mounting Bracket 6.95 6.95 Square 0.6 18 0.8W x 0.5t 2.8W x 0.5t Rectangular 1.2 2 5.5 17.8 2.6 18 14 6 1 1 6 5 5 17.8 15.8 1 LOCK 7 10.2 24 20.9 31.3 Solder/Tab Terminal 2-R0.6 Solder/Tab Terminal Key No.: N/A to 2H 1.5 PC Board Terminal 8.8 Key No.: 3H to 6H Gasket 3PDT Contacts Round Panel Thickness: 0.5 to 3.2 mm 8 o1 8 8 1.95 8 8 1.95 Locking Ring Square Mounting Bracket 0.6 18 LOCK 0.8W x 0.5t 2.8W x 0.5t 11.1 2 23 1 1 5.5 1.2 8.8 7 10.2 20.9 Solder/Tab Terminal 24 2-R0.6 Solder/Tab Terminal 31.3 Key No.: N/A to 2H 1.5 PC Board Terminal 2.6 18 6 6 20.8 18.8 11.9 5 5 1 14 Rectangular Key No.: 3H to 6H All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 33 LB Series Dimensions Dimensions for Key Selector Switches Flush Bezel Round Gasket Locking Ring 2 o2 3.85 3.85 SPDT/DPDT Contacts Panel Thickness: 0.5 to 3.2 mm Mounting Bracket 6.95 6.95 Square 0.8W x 0.5t 22 2.8W x 0.5t 22 14 1.2 2 5.5 17.8 2.6 1 1 6 5 5 17.8 15.8 Rectangular 6 1 LOCK 2 27.9 Solder/Tab Terminal 28 24.3 Solder/Tab Terminal Key No.: N/A to 2H 1.5 PC Board Terminal 7 2-R0.6 Key No.: 3H to 6H 3PDT Contacts Round 2 o2 8 8 1.95 8 8 1.95 Gasket Locking Ring Panel Thickness: 0.5 to 3.2 mm Square Mounting Bracket 22 0.8W x 0.5t 2.8W x 0.5t 1 2.6 22 5.5 1.2 6 2 23 14 6 1 5 5 20.8 18.8 11.9 11.1 Rectangular 1 LOCK 2 7 27.9 Solder/Tab Terminal Key No.: N/A to 2H 1.5 PC Board Terminal Solder/Tab Terminal 28 24.3 2-R0.6 Key No.: 3H to 6H All dimensions in mm. Terminal Arrangement (Bottom View) SPDT/DPDT Contacts 3PDT Contacts TOP TOP 22 12 32 22 12 24 14 34 24 14 21 11 31 21 11 (SPDT contacts on the right only) * For details on terminal arrangement, see page 33. * For details on mounting hole layout, see page 25. * For details on single board mounting, see page 44. 34 LB Series Accessories Accessories Shape Material Part No. Ordering No. Package Quantity Locking Ring Wrench Remarks * Used to tighten the locking ring when installing the units on to the panel. o18.0 60.0 Metal (Nickel-plated brass) MT-001 MT-001 1 Lens Removal Tool * Used to remove the lens or button. (for standard bezels) Stainless Steel MT-101 MT-101 1 60.0 Switch Guard (180 Spring return) For round / square units AL-K6SP AL-K6SP 1 AL-KH6SP AL-KH6SP 1 Guard (Polyacetal) Spring return * Degree of protection: IP65 * Used to protect pushbuttons and illuminated pushbuttons from inadvertent operation. * See page 38 for dimensions. * With the gasket mounted on the switch, attach the switch guard and mount on the panel. Base (Polyarylate) For rectangular units Switchguard for Single Board Mounting For rectangular units Guard (Polyacetal) Base (Polyarylate) LA9Z-K3 LA9Z-K3 1 Ruber Boot 1 For Standard Bezels 1. For round units LB9Z-D1 LB9Z-D1 1 LB9Z-D2 LB9Z-D2 1 LB9Z-D3 LB9Z-D3 1 * Degree of protection: IP65 * With the gasket mounted on the switch, attach the switch guard and mount on the panel. * See page 38 for dimensions. * Degree of protection: IP65 * See page 37 for dimensions. * See page 43 for mounting. 2 2. For square units Rubber (Transparent silicon rubber) 3 3. For rectangular units Mounting Hole Plug * Degree of protection: IP65 * Tightening torque: 0.1 to 0.29 N * m * See page 37 for dimensions. [Plug] Metal (Zinc diecast) Metal [Locking nut] Polyacetal AL-BM6 AL-BM6 1 [Gasket] Nitrile rubber Mounting Hole Plug * Degree of protection: IP65 * See page 37 for dimensions. Rubber Nitrile rubber (black) AL-B6 AL-B6PN05 5 35 LB Series Accessories Accessories Shape Material Part No. Ordering No. Package Quantity Rubber Boot 1 1. For round units 2 2. For square units For Flush Bezels 3 1 LB9Z-D7 LB9Z-D7 1 LB9Z-D8 LB9Z-D8 1 Black LB9Z-BS6 LB9Z-BS6 1 White LB9Z-BS6-W LB9Z-BS6-W 1 Black LB9Z-BS7 1 White LB9Z-BS7-W LB9Z-BS7-W 1 Black LB9Z-BS8 1 White LB9Z-BS8-W LB9Z-BS8-W Mounting Hole Plug 1 1. For round units 2. For square units [Plug] Polyamide (Black) [Gasket] Nitrile rubber [Mounting Plate] Stainless Steel 3 3. For rectangular units Terminal Cover 36 LB9Z-D6 3. For rectangular units 2 1 Degree of protection: IP65 See page 37 for dimensions. See page 43 for mounting. LB9Z-D6 Rubber (Transparent silicon rubber) 2 LB9Z-BS7 LB9Z-BS8 Remarks Degree of protection: IP65 Panel thickness: 0.5 to 3.2 mm See page 37 for dimensions. 1 1. For SPDT/ DPDT contacts LB9Z-VL2 LB9Z-VL2PN10 10 2. For 3PDT contacts LB9Z-VL3 LB9Z-VL3PN10 10 See page 38 for dimensions. See page 41 for mounting. LB Series Accessories Dimensions for Accessories Rubber Boot Standard Bezel For round units (LB9Z-D1) For square units (LB9Z-D2) For rectangular units (LB9Z-D3) 26 Flush Bezel For round units (LB9Z-D6) 11.5 11.5 11.5 20 o2 0 20 or square units F (LB9Z-D7) or rectangular units F (LB9Z-D8) 24 30 4 4 4 24 4 o2 Mounting Hole Plug Standard Bezel 6. 2 12 o1 6. 2 2.5 o1 6 o17.8 o18 o16.5 2 +0 0 .2 AL-BM6 +0 0 .2 AL-B6 Mounting Hole Layout Flush Bezel For round units (LB9Z-BS6/LB9Z-BS6-W) 2 Gasket Locking Ring Panel Thickness: 0.5 to 6 mm or square units F (LB9Z-BS7/LB9Z-BS7-W) or rectangular units F (LB9Z-BS8/LB9Z-BS8-W) Mounting Hole Layout Panel Thickness: 0.5 to 3.2 mm Gasket Mounting Plate Locking Ring 22 22 o2 18.1 28 .2 8 o1 Mounting Hole Layout 18.2 +0.2 0 Mounting Hole Layout +0.2 0 24.2 +0.2 0 .2 +00 18.2 Mounting Hole Layout 2 All dimensions in mm. 37 LB Series Accessories Dimensions for Accessories Terminal Cover For SPDT/DPDT contacts (LB9Z-VL2) 29.9 For 3PDT contacts (LB9Z-VL3) 29.9 TOP 12.5 2.2 4.4 12.5 20.6 17.6 TOP 19.6 24.8 Switch Guard For round / square units (AL-K6SP) For rectangular units (AL-KH6SP ) 34 Panel Thickness 0.5 to 2.0 13.0 23.5 11.0 13.0 23.5 11.0 33 22 R 24.0 18.0 14 [For round / square units] [For rectangular units] For Single Board Mounting (LA9Z-K3) 32.6 8.8 33 22 11 13 Logo Side Key No. 0 H 23.5 Note: The panel depth is the same for switches with or without switch guards. Both types can be installed on the same PC board. 14 Panel Thickness 0.5 to 3.2 R 24 22 12.4 Key No. Side Key Reversible key Non-reversible key 8.8 22 22 6.3 14 14 8.8 Logo Side Logo Side Key No. 0 H 3 H Key No. Side Key No. Side Key No. All dimensions in mm. 22 6.3 14 8.8 Logo Side 3 H 38 Key No. LB Series Maintenance Parts Maintenance Parts Shape Lens 1 2 3 Button 1 2 3 Marking Plate 1 2 3 Material Part No. Ordering No. Package Quantity 1. For round units Polyarylate o15.4 H4 AL6M-L AL6M-LPN05 2. F or square units Polyarylate 15.4 H4 AL6Q-L AL6Q-LPN05 3. For rectangular units Polyarylate W21.4 H4 D15.4 AL6H-L AL6H-LPN05 1. For round units Polyarylate o15.4 H4 AB6M-B AB6M-BPN05 2. For square units Polyarylate 15.4 H4 AB6Q-B AB6Q-BPN05 3. For rectangular units Polyarylate W21.4 H4 D15.4 AB6H-B AB6H-BPN05 1. For round units Acrylic o13.7 H0.8 AL6M- AL6M-PN05 2. For square units Acrylic 13.7 H0.8 AL6Q- AL6Q-PN05 3. For rectangular units Acrylic W19.7 H0.8 (0.4) D13.7 AL6H- AL6H-PN05 Polyamide o17.9 H3.9 LB9Z-LN LB9Z-LNPN10 10 For standard bezel Metal (Stainless steel) 17.9 t0.6 LB9Z-LP1 LB9Z-LP1PN10 10 For flush bezel Metal (Stainless steel) W21 H8.2 D20.6 t0.8 LB9Z-LP6 LB9Z-LP6PN10 10 5 Remarks Specify the color code in place of in the part no. A: Amber, C: Clear, G: Green, R: Red, S: Blue, Y: Yellow Note: Use a clear lens for white (W) or pure white (PW) illumination. 5 5 Specify the color code in place of in the part no. B: Black, G: Green, R: Red, S: Blue W: White, Y: Yellow Specify the color code in place of in the part no. B: Black, W: White See page 42 for dimensions and engraving area. Locking Ring Anti-rotation Ring Anti-rotation Ring Key For key Reversible Key selector switches Material: Diecast zinc alloy (nickel-plated) Specify a key number in place of in the Part No. 0H: Standard key (reversible) 1H to 2H: Reversible key 3H to 6H: Non-reversible key See page 38 for dimensions. LA9Z-SK- 2 LA9Z-SK-PN02 Key size W:14 H:2 D:30.8 Non-reversible Key LB Series Maintenance LED Unit Shape LED Unit Rated Operating Voltage Package Quantity: 1 Part No. (Ordering No.) DC5V LB9Z-LED5* AC/DC12V LB9Z-LED1* AC/DC24V LB9Z-LED2* * Color Code A G PW R S W * *(Color code) R: Red, G: Green, A: Amber, W: White, S: Blue, PW: Pure White * All LB series contain an LED unit. * Use a pure white (PW) LED unit for yellow (Y) illumination. 39 LB Series Instructions o16 LB Series Miniature Control Units Flush Silhouette Switch LB Series Contents Safety Precautions 40 Instructions 40 Wiring 40 Operating Environment 40 Removing and Installing the Contact Block 41 Replacing the Lens and Marking Plate 41 Marking Plates and Films 42 Notes on Using Receptacles 42 Maintained Pushbuttons 43 Selector Switches 43 Single Board Mounting 44 Installing and Removing Contact Blocks 44 Terminal Cover 40 Handling 40 Panel Mounting 41 Installing the Lens Unit and Contact Block 42 Replacing the LED Unit 42 Installing the Rubber Boot 43 Switches with Guard 43 Key Selector Switches 43 Mounting Holes and Assembly Procedure 44 Safety Precautions **Turn off the power to the LB series control units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard. **To avoid burning your hand, use the lamp holder tool when replacing the lamps. **For wiring, use wires of a proper size to meet voltage and current requirements. Solder correctly according to the instructions in "Wiring" and "Notes on Terminal Cover." Improper soldering may cause overheating and create a fire hazard. Also, when using tab terminals, use receptacles of appropriate size. Instructions Wiring Operating Environment 1) Solder the terminals at 350C within 3 seconds using a 60W soldering iron. Sn-Ag-Cu type is recommended when using leadfree solder. When soldering, do not touch the LB series with the soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal. 2) Use non-corrosive liquid flux. **Do not use the LB series where corrosive gases exist or under an environment exceeding the operating temperature and humidity ranges. Otherwise, damages due to contact failure or change of surface color may occur. **Major parts of the switch are plastic. Scratches or damages may occur when scraped with a sharp object or applied with excessive load or shock. Note that this may cause operation and appearance failure of the operator and bezel. **Adherence of detergent, cutting oil, or special chemicals to the switch may result in operation failures and appearance failures such as change of surface color. Terminal Cover Solder/tab terminal Insert the terminal cover into the contact block with the TOP markings on the contact block and the terminal cover in the same direction. Note: When wiring, insert the lead wires into the terminal cover holes before soldering. After wiring, the terminal covers cannot be installed. Standard Bezel Flush Bezel 40 Handling Contacts (micro switch) When using NC (normally closed) and NO (normally open) contacts of the same microswitch, avoid connections of different voltages, or connections of different types of power supplies. Failure to observe this instruction may cause a short-circuit. Protection against oil (IP65) The LB series has been tested according to JIS C 0920: Appendix 1 by using water insoluble cutting oil Class N3, No. 8 (JIS K 2241) to prove that the switches will not be damaged by oil drops or splashes. This may not apply to special types of oils. Contact IDEC for details. LB Series Instructions Instructions Removing and Installing the Contact Block Replacing the Lens and Marking Plate 1) Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed. 2) Insert the contact block with the TOP markings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow. Removing [Standard Bezel] 1) From the opposite side of the TOP marking, remove the operator (lens, marking plate, and lens holder) using the optional lens removal tool (MT-101) by gripping the recesses of the color lens. Removing from the TOP side may damage the metal bezel. locking lever Panel Mounting Remove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator. (For Standard Bezel) Panel [Removing the Operator (standard bezel)] [Flush Bezel] 1) Push the tip of the flat screwdriver to the groove of the color lens and pull out the operator (lens, marking plate, lens holder). TOP Remove from the opposite side of the TOP marking Anti-rotation Ring TOP Locking Ring TOP Contact Block [Removing the Operator (flush bezel)] 2) Remove the marking plate by pushing the lens from the rear to disengage the latches between the lens and holder, using the screwdriver as shown below. (For Flush Bezel) Panel Anti-rotation Ring TOP Locking Ring [Removing the Lens] TOP Contact Block Notes on Mounting Use the optional ring wrench (MT-001) to mount the operator onto the panel. Tightening torque should not exceed 0.7 N*m. Do not use pliers. Excessive tightening will damage the locking ring. Note) The translucent in the lens holder cannot be removed because this filter is sealed to make the unit waterproof and oiltight. Installing Insert the marking plate into the color lens, and press the lens onto the lens holder to engage the latches. Pay attention to the orientation of the marking plate. Recesses Engage Engraving Surface Marking Color Lens Plate Latches Lens Holder 41 LB Series Instructions Instructions Installing the Lens Unit and Contact Block Replacing the LED Unit To insert the lens unit into the operator, press in the lens unit by making sure that the latch on the operator is aligned with the latch on the lens unit. The LED unit can be replaced without tools by pulling out the lens unit from the contact block. Round lens unit Square lens unit Latch Round lens unit Latch Square lens unit Latch Standard BezelTOP TOP Latch TOP Latch Latch TOP Latch Contact Block Latch LED Unit Orientation of the LED unit Insert the LED unit into the contact block with the TOP markings on the contact block and LED unit in the same orientation. Recess Round Lens Unit Square Lens Unit Recess Latch Latch Operator Operator TOP TOP Flush Bezel TOP TOP Latch Latch Recess Operator Marking Plates and Films For illuminated pushbuttons and pushbuttons with illuminated lens, legends and symbols can be engraved on the marking plates, or printed film can be inserted under the lens for labelling purposes. Marking Plate and Marking Film Size Engraving Area 0.8 Engraving Area 12.0 Rectangular 13.7 12.0 12.0 Square Engraving Area 0.8 0.8 12.0 Round 18.0 Notes on Using Receptacles 1) U se #110 tab receptacles, 0.5 mm-thick. 2) When connecting the terminals on the left and center, make sure that surfaces of the receptacles face each other. Otherwise, short-circuit may occur. TOP TOP 19.7x13.7 13.7 * Engraving must be made on the engraving area within 0.5 mm deep. * The marking plate is made of white acrylic resin. 13.6 13.6 Applicable Marking Film Built-in Marking Plate Lens Notes on replacing the LED Unit When replacing the LED unit, make sure that static electricity is not applied. Make sure that the LB series has cooled down before replacing the LED unit. To avoid burn injuries, be careful not to touch the unit while it is still hot. 11.8 19.6 13.6 * Film thickness: 0.1 mm per film * Marking film is not included. * Recommended marking film: Polyester film Insertion Order of Marking Plate and Film Engraved Surface Marking Lens Lens Film Plate Holder TOP Operator Note: Film is not included. The marking plate must be engraved on the specified side as shown above. Pay attention to the orientation of the marking plate. 42 Correct Incorrect 3) A pply only horizontal force against the panel to the tab. The switch may be damaged if a force other than a horizontal force is applied. LB Series Instructions Instructions Installing the Rubber Boot Flush Bezel When using in places where the switches are subjected to water splash or an excessive amount of dust, make sure to use the optional rubber boot. As shown in the drawing below, remove the gasket from the operator, and attach the rubber boot from the front (button side). Mount the rubber boot so that the protrusion at the bottom surface of the operator fits with the recess on the operator, placing the rubber boot all around the operator sleeve. Make sure that the protrusion on the rubber boot and the recess on the operator is properly fitted, otherwise, the waterproof and dustproof characteristics are not ensured. Standard Bezel How to Install the Rubber Boot For rectangular and square units, pull out the seals of the rubber boot and place them around the operator sleeve as shown below. Make sure that the seals are not twisted or tucked inside and that the gasket is removed, otherwise waterproof and dustproof characteristics are not ensured. Good Example Protrusion How to Install the Rubber Boot Recess Rectangular Remove Bad Example Seals Mount Seals Mount Operator Remove Gasket Rubber boot installed Square Seals Mount Operator Pushbuttons, Illuminated Pushbuttons, and Lenses with Switch Guard Remove Rubber boot installed When turning the operator or key, make sure that they are turned to the each position properly. Round Operator Selector Switches with Key Remove Rubber boot installed Gasket Do not apply force to the switch guard when the switch guard is not attached to a panel. When opening the switch guard, do not open more than 180. The hinge may break. Selector Switches Gasket Mount Maintained Pushbuttons Do not replace the buttons when the pushbutton is in the maintained position. Replacing the button in the maintained position may damage the internal mechanism. Also, do not remove the contact block with the button in the maintained position. The contact may not operate properly when the contact block is remounted. Make sure to push down fully when using the pushbuttons. Gasket Seals Note: Install the rubber boot before mounting the unit to the panel. Observe the following instructions to prevent malfunction or damage. * Insert the key to the bottom of the key hole. * Do not remove the key from any key retained position. * Besides the standard key (key number 0H), six other key numbers are available. Use a key of the matching number with the key cylinder. The standard key does not have a key number indication. * Keys are available in two types. Key numbers 0H (standard), 1H, and 2H are reversible keys which can be inserted in two ways. Key numbers 3H, 4H, 5H, and 6H are non-reversible keys. Make sure of correct insertion direction. 43 LB Series Instructions Single Board Mounting o6 drilled hole for operating the locking lever Flush Bezel SPDT/DPDT Contacts 3PDT Contacts * 45 mm minimum for switches with guard o1 8. o1 8. 0 .1 22 min Rear 2 * 45 mm minimum for switches with guard 2 0 .1 22 min The IDEC's LB Series is available for single board mounting. Installing and Removing Contact Blocks Turn the locking lever to install and remove contact blocks on the PC using a screwdriver from a hole in the PC board. Determine the location of the switches so that the locking lever can be operated. Panel Cut-out le o18 ss .2 0.1 1.9 +_ 0.05 1.9 0.05 Standard Bezel 28 min SPDT/DPDT Contacts 6. 3PDT Contacts 6. 0 +0. .1 +0 0 21 or more 18 or more 18 or more (24 or more for rectangular units) 28 min Assembly Procedure 1. Install the operator to the panel. 2. Mount the contact block to the operator from the rear. 3. Turn the locking lever to lock the contact block. 4. Insert the PC board to terminals and solder. 0 0 1 24.2 0.1 All dimensions in mm. o1 o1 24.2 0.1 18.2 0.1 or 23.2 min 22 min .5 17.10.05 o16.0 14.8 +_ 0.05 R0 18.2 0.1 4+0.1 0 22 min Flush Bezel 22 min Standard Bezel 18.2 0.1 22 min Drill mounting holes in the panel as shown below. When the units are mounted collectively, provide adequate clearance. 18.2 0.1 22 min Mounting Holes and Assembly Procedure 23.2 min 22 min 23.2 or more (24 or more for rectangular units) Note 1: Make sure that each terminal is inserted into the PC board correctly. Note 2: Do not apply tensile force to the connector cable for an extended period of time. Note 3: Do not expose the contact block to water. Note 4: Ensure to lock contact blocks when the contact blocks are installed on the operators. Specifications and other descriptions in this catalog are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: marketing@idec.co.jp IDEC CORPORATION (USA) IDEC (SHENZHEN) CORPORATION Unit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UK Tel: +44-1256-321000, Fax: +44-1256-327755 E-mail: sales@uk.idec.com Unit AB-3B2, Tian Xiang Building, Tian'an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRC Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 IDEC CANADA LIMITED Wendenstrasse 331, 20537 Hamburg, Germany Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 E-mail: service@idec.de IDEC ELEKTROTECHNIK GmbH IDEC (SHANGHAI) CORPORATION Units 11-15, Level 27, Tower 1, Millennium City 1, 388 Kwun Tong Road, Kwun Tong, Kowloon, Hong Kong Tel: +852-2803-8989, Fax: +852-2565-0171 E-mail: info@hk.idec.com IDEC (BEIJING) CORPORATION 8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih District, New Taipei City, Taiwan Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 E-mail: service@tw.idec.com 3155 Pepper Mill Court, Unit 4, Mississauga, Ontario, L5L 4X7, Canada Tel: +1-905-890-8561, Toll Free: (888) 317-4332 Fax: +1-905-890-8562 E-mail: sales@ca.idec.com IDEC AUSTRALIA PTY. LTD. Unit 17, 104 Ferntree Gully Road, Oakleigh, Victoria 3166, Australia Tel: +61-3-8523-5900, Toll Free: 1800-68-4332 Fax: +61-3-8523-5999 E-mail: sales@au.idec.com www.idec.com IDEC ELECTRONICS LIMITED 1175 Elko Drive, Sunnyvale, CA 94089-2209, USA Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246 E-mail: opencontact@idec.com Room 608-609, 6F, Gangtai Plaza, No. 700, Yan'an East Road, Shanghai 200001, PRC Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 E-mail: idec@cn.idec.com Room 211B, Tower B, The Grand Pacific Building, 8A Guanghua Road, Chaoyang District, Beijing 100026, PRC Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 IDEC IZUMI (H.K.) CO., LTD. IDEC TAIWAN CORPORATION IDEC IZUMI ASIA PTE. LTD. No. 31, Tannery Lane #05-01, HB Centre 2, Singapore 347788 Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: info@sg.idec.com Cat. No. EP1366-0 JUNE 2011 00S PRINTED IN JAPAN