For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 1
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
Functional Diagram
The HMC899LP4E is a MMIC band pass lter which
features a user selectable passband frequency. The
3 dB lter bandwidth is approximately 18%. The 20
dB lter bandwidth is approximately 35%. The center
frequency can be varied between 18.5 and 37.0
GHz by applying an analog tune voltage between 0
and 14V. This tunable lter can be used as a much
smaller alternative to physically large switched lter
banks and cavity tuned lters. The HMC899LP4E has
excellent microphonics due to the monolithic design,
and provides a dynamically adjustable solution in
advanced communications applications.
Typical Applications Features
General Description
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
The HMC899LP4E is ideal for:
• Test & Measurement Equipment
• Military RADAR & EW/ECM
• SATCOM & Space
• Industrial & Medical Equipment
Fast Tuning Response
Excellent Wideband Rejection
Single Chip Replacement
for Mechanically Tuned Designs
24 Lead 4x4 mm SMT Package
Electrical Specications, TA = +25 °C
Parameter Min. Typ. Max. Units
Fcenter Tuning Range 18.5 37.0 GHz
3 dB Bandwidth 18 %
Low Side Rejection Frequency (Rejection >20 dB) 0.81 *Fcenter GHz
High Side Rejection Frequency (Rejection >20 dB) 1.20 *Fcenter GHz
Low Side Sub-Harmonic Rejection (Rejection >40 dB) 0.54 *Fcenter GHz
High Side Sub-Harmonic Rejection (Rejection >40 dB) 1.32 *Fcenter GHz
Re-entry Frequency (Rejection <30 dB) >50 GHz
Insertion Loss 7 dB
Return Loss 10 dB
Input IP3 (Pin = 0 to +20 dBm) 25 dBm
Input Power @ 5° Shift In Insertion Phase (Vfctl = 0.5V) 14 dBm
Input Power @ 5° Shift In Insertion Phase (Vfctl > = 1V) 16 dBm
Frequency Control Voltage (Vfctl)0 14 V
Source/Sink Current (Ifctl)±1 mA
Residual Phase Noise [1] (100 kHz Offset) -157 dBc/Hz
Fcenter Drift Rate -3.4 MHz/°C
Tuning Speed, Phase Settling to within 10° [2] < 100 ns
[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.
[2] Tuning speed includes 40 ns tuning voltage ramp from driver.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 2
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Broadband Insertion Loss vs. Vfctl
Insertion Loss vs. Vfctl
Insertion Loss vs. Temperature, Vfctl = 7V
Broadband Return Loss vs. Vfctl
Return Loss vs. Vfctl
Return Loss vs. Temperature, Vfctl = 7V
-80
-70
-60
-50
-40
-30
-20
-10
0
5 10 15 20 25 30 35 40 45 50
0V
3V
7V
14V
INSERTION LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
5 10 15 20 25 30 35 40 45 50
S11
S22
RETURN LOSS (dB)
FREQUENCY (GHz)
14V
7V
0V
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
15 20 25 30 35 40 45
0V
3V
7V
14V
INSERTION LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
15 20 25 30 35 40 45
S11
S22
RETURN LOSS (dB)
FREQUENCY (GHz)
14V
7V
0V
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
15 20 25 30 35 40 45
+25C
+85C
-40C
INSERTION LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
15 20 25 30 35 40 45
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
S22
S11
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 3
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Center Frequency vs. Temperature Insertion Loss vs. Temperature
Maximum Return Loss in a 2 dB
Bandwidth vs. Temperature
Low Side Rejection Ratio vs.
Temperature [1]
High Side Rejection Ratio vs.
Temperature [1]
3 dB Bandwidth vs. Temperature
[1] Rejection ratio is dened as the ratio of the frequency at which the relative insertion loss is 20 dB to ƒcenter
10
15
20
25
30
35
40
0 2 4 6 8 10 12 14
+25C
+85C
-40C
CENTER FREQUENCY (GHz)
Vfctl (V)
-16
-14
-12
-10
-8
-6
-4
-2
0
0 2 4 6 8 10 12 14
+25C
+85C
-40C
INSERTION LOSS (dB)
Vfctl (V)
13
14
15
16
17
18
19
20
21
22
23
0 2 4 6 8 10 12 14
+25C
+85C
-40C
BANDWIDTH (%)
Vfctl (V)
-14
-12
-10
-8
-6
-4
-2
0
0 2 4 6 8 10 12 14
+25C
+85C
-40C
RETURN LOSS (dB)
Vfctl (V)
0.7
0.75
0.8
0.85
0.9
0 2 4 6 8 10 12 14
+25C
+85C
-40C
F20dB TO Fcenter RATIO
Vfctl (V)
1.1
1.15
1.2
1.25
1.3
0 2 4 6 8 10 12 14
+25C
+85C
-40C
F20dB To Fcenter RATIO
Vfctl (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 4
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Tuning Sensitivity vs. Temperature
Group Delay vs. Fcenter vs. Temperature Input IP3 vs. Temperature
Phase Sensitivity vs. Vfctl
Group Delay
Residual Phase Noise
0
500
1000
1500
2000
2500
3000
1 2 3 4 5 6 7 8 9 10 11 12 13 14
+25C
+85C
-40C
SENSITIVITY (MHz/V)
Vfctl (V)
0.2
0.3
0.4
0.5
0.6
10 15 20 25 30 35 40 45 50
FREQUENCY (GHz)
GROUP DELAY (ns)
0V
7V 14V
2V
0.2
0.3
0.4
0.5
0.6
0 2 4 6 8 10 12 14
+ 25C
+ 85C
- 40C
GROUP DELAY (nS)
Vfctl (V)
10
15
20
25
30
1 2 3 4 5 6 7 8 9 10 11 12 13 14
+ 25C
+ 85C
- 40C
INPUT IP3 (dBm)
Vfctl (V)
-170
-160
-150
-140
-130
-120
1e+2 1e+3 1e+4 1e+5 1e+6 1e+7
+ 1.0V
+ 7.0V
+ 14.0V
RESIDUAL PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
5
10
15
20
25
30
35
40
45
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10 12 14
APPROXIMATE Fcenter (GHz)
DELTA PHI (RAD/V)
Vfctl (Vdc)
Delta Phi
Approximate
Fcenter
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 5
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Absolute Maximum Ratings Reliability Information
Frequency Control Voltage (Vfctl) -0.5 to +15V
RF Power Input 27 dBm
Storage Temperature -65 to +150 °C
ESD Sensitivity (HBM) Class 1 A
Junction Temperature to Maintain
1 Million Hour MTTF 150 °C
Nominal Junction Temperature
(T= 85 °C and Pin = 27 dBm) 103 °C
Operating Temperature -40 to +85 °C
Frequency Shift vs. Pin
Phase Shift vs. Pin
-15
-10
-5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Vfctl = 0.5V
Vfctl = 1V
Vfctl = 7V
Vfctl = 12V
Vfctl = 14V
PHASE (DEGREES)
INPUT POWER (dBm)
-80
-60
-40
-20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Vfctl = 0.5V
Vfctl = 1V
Vfctl = 7V
Vfctl = 12V
Vfctl = 14V
FREQUENCY (MHz)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 6
FILTERS - TUNABLE - SMT
3
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. Pin BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
Pin BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC899LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H899
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reow temperature of 260 °C
Package Information
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 7
FILTERS - TUNABLE - SMT
3
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Pin Descriptions
Application Circuit
Pin Number Function Description Interface Schematic
8, 10, 11, 20 - 23 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
1, 2, 4 - 7, 12 - 15,
17 - 19, 24 GND These pins and exposed paddle
must be connected to RF/DC ground.
3 RFIN This pin is AC coupled and
matched to 50 Ohms.
9 Vfctl Center frequency control voltage.
16 RFOUT This pin is AC coupled and
matched to 50 Ohms.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 8
FILTERS - TUNABLE - SMT
3
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohms impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 131087 [1]
Item Description
J1, J2 Connector, 2.4 mm, 50 GHz Jack
J6, J8 DC Pin
C2 100 pF Capacitor, 0402 Pkg.
U1 HMC899LP4E Filter - Tunable
PCB [2] 130746 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 25FR
HMC899LP4E
v00.0211
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D