Your Guide ERSA Tool Holders and Cleaning Sponges 0A 05 0A 04 0A 13 Soldering and desoldering devices are heating devices and depending on the application can attain high temperatures during operation. This equipment must never be operated without supervision; during longer interruptions of work they should be switched off and always stored in suitable tool holders. Most of the ERSA tool holders are made of metal or heat-resistant duroplastic, and most are antistatic. 0A 17 0A 18 0A 19 Most holders have a viscous sponge for tip cleaning, as well as options for conveniently resting and storing soldering and desoldering tips. Note: 0A 41 / 0A 42 0A 45 Order no. 0A04 0A05 0A17 0A18 0A19 0A39 0A41 0A42 0A43 0A44 0A45 Description Tool holder A 04 Tool holder A 05 Tool holder A 17 Tool holder A 18 Tool holder A 19 Tool holder A39 Tool holder A 41 Tool holder A 42, antistatic Tool holder A 43, antistatic Tool holder A 44, antistatic Universal holder A 45 0A47 0A48 3N194 0SH03 0G156 0003B 0004G 0006G 0007G Tool holder A 47 with additional fixing Tool holder A 48, antistatic Rubber support disk 3 N 194 SMD soldering and desoldering tip holder Sponge container G156 Blue viscose sponge, 55 x 55 mm Viscose sponge, 34 x 65 mm Sponge, o 36 mm Viscose sponge, 70 x 46 mm 3 N 194 ERSA offers wire mesh to dry clean soldering tips. For further information please refer to: www.ersa.com for Soldering irons from 50 W - 150 W output; Isotyp and 0180PZ soldering irons Medium-sized and small soldering irons Soldering irons with an output ranging from 200 W - 550 W Soldering irons of the Multitip series; Tip 260 and TC 65 soldering irons Soldering irons of the Multitip series RT 80 soldering iron Irons of the Multitip series; Multi-Pro, Multi-TC, Basic tool 60 / 80 soldering irons Tip tool, Power tool, Ergo tool, Micro tool and Tech tool soldering irons Chip tool (fig. see page 21) X-Tool desoldering iron (fig. see page 25) 832 soldering tip series (C8 - C18, MD, QD, ZD models), solder wire feed unit and solder fume extraction Mini solder baths of the 0832XD series (fig. see page 19) i-Tool soldering iron Multitip, Multi-Pro, ERSA 30 S soldering irons Soldering and desoldering tips of the 212 and 422 series Independent 75 and Independent 130 gas soldering irons Tool holders 0A09, 10, 13, 16, 24, 25, 28, 29, 30, 34, 35, 36, 39, 41 - 45, 48 Tool holders 0A05, 0A21 and 0A26 Sponge container 0G156 for the Independent 75 / 130 gas soldering irons Tool holder 0A19 33