32 33
Your Guide
Soldering and desoldering
devices are heating
devices and depending on
the application can attain
high temperatures during
operation. This equipment
must never be operated
without supervision; during
longer interruptions of work
they should be switched off
and always stored in suitable
tool holders.
Most of the ERSA tool
holders are made of metal or
heat-resistant duroplastic, and
most are antistatic.
Most holders have a
viscous sponge for tip
cleaning, as well as options
for conveniently resting
and storing soldering and
desoldering tips.
ERSA Tool Holders and Cleaning Sponges
Order no. Description for
0A04
Tool holder A 04
Soldering irons from 50 W - 150 W output; Isotyp and 0180PZ soldering irons
0A05
Tool holder A 05
Medium-sized and small soldering irons
0A17
Tool holder A 17
Soldering irons with an output ranging from 200 W - 550 W
0A18
Tool holder A 18
Soldering irons of the Multitip series; Tip 260 and TC 65 soldering irons
0A19
Tool holder A 19
Soldering irons of the Multitip series
0A39
Tool holder A39
RT 80 soldering iron
0A41
Tool holder A 41
Irons of the Multitip series; Multi-Pro, Multi-TC, Basic tool 60 / 80 soldering irons
0A42
Tool holder A 42, antistatic
Tip tool, Power tool, Ergo tool, Micro tool and Tech tool soldering irons
0A43
Tool holder A 43, antistatic
Chip tool (fig. see page 21)
0A44
Tool holder A 44, antistatic
X-Tool desoldering iron (fig. see page 25)
0A45
Universal holder A 45
832 soldering tip series (C8 - C18, MD, QD, ZD models), solder wire feed unit
and solder fume extraction
0A47
Tool holder A 47 with additional fixing
Mini solder baths of the 0832XD series (fig. see page 19)
0A48
Tool holder A 48, antistatic
i-Tool soldering iron
3N194
Rubber support disk 3 N 194
Multitip, Multi-Pro, ERSA 30 S soldering irons
0SH03
SMD soldering and desoldering tip holder
Soldering and desoldering tips of the 212 and 422 series
0G156
Sponge container G156
Independent 75 and Independent 130 gas soldering irons
0003B
Blue viscose sponge, 55 x 55 mm
Tool holders 0A09, 10, 13, 16, 24, 25, 28, 29, 30, 34, 35, 36, 39, 41 - 45, 48
0004G
Viscose sponge, 34 x 65 mm
Tool holders 0A05, 0A21 and 0A26
0006G
Sponge, ø 36 mm
Sponge container 0G156 for the Independent 75 / 130 gas soldering irons
0007G
Viscose sponge, 70 x 46 mm
Tool holder 0A19
0A 04 0A 05 0A 13
0A 17 0A 18 0A 19
0A 41 / 0A 42 0A 45 3 N 194
Note:
ERSA offers wire mesh to dry
clean soldering tips. For
further information please
refer to: www.ersa.com
