HIGH VOLTAGE Chip Resistor
2512 Size, Surface Mount, Solderable
STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401
Where Quality Isn't a Goal...It's Our Tradition
Three packaging options are available:
• Bulk Packaging - (900 per Bag Max.)
• Waffle Pack - (45 per Tray Max.)
• Tape & Reel - (1800 per Reel Max.)
PACKAGING
SOTA offers a full line of component parts in the 2512 size
including Military (MIL-PRF-55342 "S" level) and High-
Reliability (customer specified testing). Available options
are epoxy bondable and wire bondable terminations,
custom part marking, and untrimmed resistors.
OPTIONS
PERFORMANCE CHARACTERISTICS
Resistance Range
Tolerances
Maximum Power
Maximum Voltage
20KW-100MW
1%, 2%, 5%, 10%, 20%
2000 mW
1200 Volts
PART NUMBERING MECHANICAL
Length
Width
Thickness
Top Term.
Bottom Term.
Approx. Weight
INCHES
.250 (+.010/-.005)
.125 (+.008/-.005)
.025 - .032
.015 - .040
.015 - .040
.051 grams
MM
6.35 (+.25/-.13)
3.18 (+.20/-.13)
.64 - .81
.38 - 1.02
.38 - 1.02
TYPICAL LIFE TEST PERFORMANCE
POWER DISSIPATION
POWER DERATING
• TCR's to ± 100 ppm
• Made with the same materials and
process as our MIL-PRF-55342 "S"
level qualified chips
• Suitable for solder reflow, vapor
phase, or wave solder attachment
FEATURES
• Tolerances to ± 1%
• Operating temperature range :
-55 C to +150 C
• Pretinned (Sn60) nickel barrier
terminations
°°
Solderability: Solder coating compatible with Sn60, 62 or
63 solders, provides good wetting with all types of solder
attachment. All product is tested IAW Mil-Std-202,
method 208, including 8 hour steam aging.
06/24/98
< 100 ppm
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
ENVIRONMENTAL PERFORMANCE (*)
TCR (-55 to +125 C in ppm/ C)
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life
°°
S2512CVX 105 J 20
TCR
10: ±100 ppm 20: ±200 ppm 30: ±300 ppm
TOLERANCES
F: 1% G: 2% J: 5% K:10% M: 20%
RESISTANCE VALUE
Three digits are used with all leading digits significant. The last digit
specifies the number of zeros to add.
(*)Typical resistance change, the maximum is the same as
MIL-PRF-55342. Test methods are per Mil-PRF-55342.
GLASS
PASSIVATION
WRAPAROUND
TERMINATIONS
PRETINNED
96% ALUMINA BODY
THICK FILM
RESISTOR ELEMENT
