SPEC NO: DSAD2463 REV NO: V.5 DATE: NOV/29/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000629
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
P/N: TC23-11SRWA SUPER BRIGHT RED
Description
The Super Bright Red source color devices are made
with Gallium Aluminum Arsenide Red Light Emitting
Diode.
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY
Features
•2.3 INCH MATRIX HEIGHT.
•DOT SIZE 5mm.
•LOW CURRENT OPERATION.
•HIGH CONTRAST AND LIGHT OUTPUT.
•COMPATIBLE WITH ASCII AND EBCDIC CODES.
•STACKABLE HORIZONTALLY.
•COLUMN CATHODE AND COLUMN ANODE AVAILABLE.
•EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
•MULTICOLOR AVAILABLE.
•MECHANICALLY RUGGED.
•STANDARD : GRAY FACE, WHITE DOT.
•RoHS COMPLIANT.
SPEC NO: DSAD2463 REV NO: V.5 DATE: NOV/29/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000629
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
TC23-11SRWA SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED 12000 44000 Column Cathode
Description
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Red 660 nm IF=20mA
λDDominant Wavelength Super Bright Red 640 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA
C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Red 1.85 2.5 V IF=20mA
IRReverse Current Super Bright Red 10 uA VR = 5V
Parameter Super Bright Red Units
Power dissipation 100 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAD2463 REV NO: V.5 DATE: NOV/29/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000629
Super Bright Red TC23-11SRWA
SPEC NO: DSAD2463 REV NO: V.5 DATE: NOV/29/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000629
PACKING & LABEL SPECIFICATIONS TC23-11SRWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.