CLA40P1200FC High Efficiency Thyristor VRRM = 2x 1200 V I TAV = 40 A VT = 1,19 V Phase leg Part number CLA40P1200FC Backside: isolated 2 1 4 5 3 Features / Advantages: Applications: Package: i4-Pac Thyristor for line frequency Planar passivated chip Long-term stability Line rectifying 50/60 Hz Softstart AC motor control DC Motor control Power converter AC power control Lighting and temperature control Isolation Voltage: 3000 V~ Industry convenient outline RoHS compliant Epoxy meets UL 94V-0 Soldering pins for PCB mounting Backside: DCB ceramic Reduced weight Advanced power cycling Terms Conditions of usage: The data contained in this product data sheet is exclusively intended for technically trained staff. The user will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to his application. The specifications of our components may not be considered as an assurance of component characteristics. The information in the valid application- and assembly notes must be considered. Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of your product, please contact the sales office, which is responsible for you. Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you. Should you intend to use the product in aviation, in health or live endangering or life support applications, please notify. For any such application we urgently recommend - to perform joint risk and quality assessments; - the conclusion of quality agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery dependent on the realization of any such measures. IXYS reserves the right to change limits, conditions and dimensions. (c) 2015 IXYS all rights reserved Data according to IEC 60747and per semiconductor unless otherwise specified 20150827c CLA40P1200FC Ratings Thyristor Conditions Symbol VRSM/DSM Definition max. non-repetitive reverse/forward blocking voltage TVJ = 25C VRRM/DRM max. repetitive reverse/forward blocking voltage TVJ = 25C 1200 I R/D reverse current, drain current VT forward voltage drop TVJ = 25C 50 A 4 mA TVJ = 25C 1,25 V 1,49 V 1,19 V IT = 40 A IT = 80 A IT = 40 A IT = 80 A I T(RMS) RMS forward current 180 sine VT0 threshold voltage rT slope resistance R thJC thermal resistance junction to case TVJ = 125 C for power loss calculation only thermal resistance case to heatsink total power dissipation I TSM max. forward surge current value for fusing V TVJ = 125C TC = 95 C RthCH max. Unit 1300 V VR/D = 1200 V average forward current Ptot typ. VR/D = 1200 V I TAV It min. 1,50 V T VJ = 150 C 40 A 63 A TVJ = 150 C 0,86 V 7,9 m 0,8 K/W K/W 0,20 TC = 25C 150 W t = 10 ms; (50 Hz), sine TVJ = 45C 650 A t = 8,3 ms; (60 Hz), sine VR = 0 V 700 A t = 10 ms; (50 Hz), sine TVJ = 150 C 555 A t = 8,3 ms; (60 Hz), sine VR = 0 V 595 A t = 10 ms; (50 Hz), sine TVJ = 45C 2,12 kAs t = 8,3 ms; (60 Hz), sine VR = 0 V 2,04 kAs t = 10 ms; (50 Hz), sine TVJ = 150 C 1,54 kAs t = 8,3 ms; (60 Hz), sine VR = 0 V CJ junction capacitance VR = 400 V f = 1 MHz TVJ = 25C PGM max. gate power dissipation t P = 30 s T C = 150 C 1,48 kAs 25 t P = 300 s pF 10 W 5 W 0,5 W PGAV average gate power dissipation (di/dt) cr critical rate of rise of current TVJ = 150 C; f = 50 Hz repetitive, IT = 120 A t P = 200 s; di G /dt = 0,3 A/s; (dv/dt)cr critical rate of rise of voltage V = VDRM VGT gate trigger voltage VD = 6 V TVJ = 25 C 1,5 TVJ = -40 C 1,6 V I GT gate trigger current VD = 6 V TVJ = 25 C 50 mA TVJ = -40 C 80 mA VGD gate non-trigger voltage TVJ = 150C 0,2 V I GD gate non-trigger current 3 mA IL latching current TVJ = 25 C 125 mA IG = 0,3 A; V = VDRM non-repet., I T = 150 A/s 40 A 500 A/s 1000 V/s TVJ = 150C R GK = ; method 1 (linear voltage rise) VD = VDRM tp = 10 s IG = 0,3 A; di G /dt = V 0,3 A/s IH holding current VD = 6 V R GK = TVJ = 25 C 100 mA t gd gate controlled delay time VD = 1/2 VDRM TVJ = 25 C 2 s tq turn-off time IG = 0,3 A; di G /dt = 0,3 A/s VR = 100 V; I T = 40 A; V = VDRM TVJ =125 C di/dt = 10 A/s dv/dt = IXYS reserves the right to change limits, conditions and dimensions. (c) 2015 IXYS all rights reserved 200 s 20 V/s t p = 200 s Data according to IEC 60747and per semiconductor unless otherwise specified 20150827c CLA40P1200FC Package Ratings i4-Pac Symbol I RMS Definition Conditions RMS current per terminal min. TVJ virtual junction temperature T op operation temperature Tstg storage temperature -40 typ. max. 70 Unit A -40 150 C -40 125 C 150 C 9 Weight FC 20 mounting force with clip d Spp/App VISOL t = 1 minute Product Marking UL listed Logo IXYS mm terminal to backside 5,1 mm 3000 V 2500 V 50/60 Hz, RMS; IISOL 1 mA Part description C L A 40 P 1200 FC (R) ISOPLUS(R) = = = = = = = Thyristor (SCR) High Efficiency Thyristor (up to 1200V) Current Rating [A] Phase leg Reverse Voltage [V] i4-Pac (5) XXXXXXXXX Part No. Assembly Line N 1,7 t = 1 second isolation voltage 120 terminal to terminal creepage distance on surface | striking distance through air d Spb/Apb g Zyyww abcd Date Code Assembly Code Ordering Standard Ordering Number CLA40P1200FC Equivalent Circuits for Simulation I V0 R0 Marking on Product CLA40P1200FC * on die level Delivery Mode Tube Code No. 510210 T VJ = 150 C Thyristor V 0 max threshold voltage 0,86 V R0 max slope resistance * 5,4 m IXYS reserves the right to change limits, conditions and dimensions. (c) 2015 IXYS all rights reserved Quantity 25 Data according to IEC 60747and per semiconductor unless otherwise specified 20150827c CLA40P1200FC Outlines i4-Pac D2 A A2 E1 L L1 D D3 D1 R Q E c 1 2 3 4 5 4x e 4x b2 5x b A1 b4 W Dim. A A1 A2 b b2 b4 c D D1 D2 D3 E E1 e L L1 Q R W Millimeter min max 4.83 5.21 2.59 3.00 1.17 2.16 1.14 1.40 1.47 1.73 2.54 2.79 0.51 0.74 20.80 21.34 14.99 15.75 1.65 2.03 20.30 20.70 19.56 20.29 16.76 17.53 3.81 BSC 19.81 21.34 2.11 2.59 5.33 6.20 4.57 2.54 0.10 - Inches min max 0.190 0.205 0.102 0.118 0.046 0.085 0.045 0.055 0.058 0.068 0.100 0.110 0.020 0.029 0.819 0.840 0.590 0.620 0.065 0.080 0.799 0.815 0.770 0.799 0.660 0.690 0.150 BSC 0.780 0.840 0.083 0.102 0.210 0.244 0.100 0.180 0.004 - Die konvexe Form des Substrates ist typ. < 0.05 mm uber der Kunststoffoberflache der Bauteilunterseite The convexbow of substrate is typ. < 0.05 mm over plastic surface level ofdevice bottom side 2 IXYS reserves the right to change limits, conditions and dimensions. (c) 2015 IXYS all rights reserved 1 4 5 3 Data according to IEC 60747and per semiconductor unless otherwise specified 20150827c CLA40P1200FC Thyristor 150 600 120 500 IT 90 ITSM 400 [A] 60 10000 TVJ = 45C TVJ = 125C [A2s] 1,0 50 Hz, 80% VRRM 1,5 2,0 2,5 0,01 100 0,1 VT [V] 1 1 Fig. 3 I t versus time (1-10 s) 1000 80 70 2: IGT, TVJ = 25C 3: IGT, TVJ = -40C 1 50 tgd IT(AV)M [s] [A] 40 6 4 5 10 5: PGM = 1 W 6: PGM = 10 W lim. 1000 10000 [W] 0 40 RthHA 0.6 0.8 1.0 2.0 4.0 8.0 80 120 160 Tcase [C] Fig. 5 Gate controlled delay time tgd dc = 1 0.5 0.4 0.33 0.17 0.08 40 1000 IG [mA] Fig. 4 Gate voltage & gate current P(AV) 0 100 IG [mA] 60 10 typ. 1 10 0,1 100 30 20 4: PGAV = 0.5 W 10 dc = 1 0.5 0.4 0.33 0.17 0.08 60 TVJ = 125C 100 23 1 4 5 6 7 8 910 t [ms] 1: IGD, TVJ = 150C 1 3 2 Fig. 2 Surge overload current ITSM: crest value, t: duration 10 [V] 2 t [s] Fig. 1 Forward characteristics VG TVJ = 125C 200 100 0,5 TVJ = 45C 1000 TVJ = 125C TVJ = 25C 0 0,0 2 It [A] 300 30 VR = 0 V Fig. 6 Max. forward current at case temperature 0,8 0,6 ZthJC 0,4 i Rthi (K/W) 1 0.01 2 005 3 0.17 4 0.36 5 0.21 [K/W] 20 0,2 0 ti (s) 0.0004 0.009 0.014 0.05 0.36 0,0 0 10 20 30 40 IT(AV) [A] 50 0 50 100 150 Fig. 7a Power dissipation versus direct output current Fig. 7b and ambient temperature IXYS reserves the right to change limits, conditions and dimensions. (c) 2015 IXYS all rights reserved 1 10 100 1000 10000 t [ms] Tamb [C] Fig. 7 Transient thermal impedance junction to case Data according to IEC 60747and per semiconductor unless otherwise specified 20150827c