Specification Tyco Electronics Control Drawing Raychem a) Part as supplied. 2O?K1** iN b) Part after unrestricted recovery. Oo O io ta Di Potting Port 3.0 , , 10.12 Di Potting Port HW Y JW H DIA AS DIA 7 | 2.0 Dia Hole in millimetres DIMENSIONS fin inches, for reference} H J P R S T UEYV JO HW JW Xx Y Part No. Min Max Min Max 410% +104 +10% +10% +10K +104 +420% 420K +20% +20% a b a b b b b b b b b b b b 302K121 24 10.4 24 5.6 38 21 3.0 1.0 12 8.5 1.6 0.39 24 13 {0.94} {0.41} {0.94} {0.22} (1.50) {0.83} {0.12} (0.04) {0.47} {0.33} (0.06) {0.04} {0,94} {0,57} 2 302K 132 30 14.2 30 5.9 55 32 3.0 1.0 12 11.5 1.8 1.0 24 18 {1.18} {0.56} {1.178} {0.23} (2.17) {1.26} {0.12} {0.04} {0.47} {0.45} (0.07) {0.04) {0.94} {0.71} 202K142 31 18.0 31 7.1 67 35 3.0 1.0 20 17.0 1.8 1.0 32 25 {1,22} {0.71} (1.22) {0.28} (2.64} {1.38} {0.12} {0.04} {0.79) {0.67} {0.07} {0.04) {1.26} {0,98} 202K153 36 22.4 36 8.4 80 42 3.0 1.0 20 19.5 2.0 1.0 32 30 {1.42} (0.88) (1.42) {0.33} (3.15) {1.65} {0.12} {0.04} {0.79} {0.77} {0.08} {0.04} {1.26} {1.18} 202K163 43 28.2 43 3.9 99 61 3.0 1.7 20 21.0 2.2 1.2 52 30 {1.69} {1.17} 1.69) {0.39} {3.90} {2.40} {0.12} {0.07} {0.79} {0.83} {0.09} {0.05} {2.05} {1.18} 202K174 60 35.1 60 15.7 130 72 3.0 1.7 20 39.0 3.2 1.5 52 50 {2.36} {1.38} (2.36) {0.62} {5.12} {2.83} {0.12} {0.07} {0.79} {1.54} {0.13} {0.06} {2.05} (1.97} 202K 185 66 44.5 66 16.8 170 390 3.0 2.0 20 51.5 3.8 2.0 52 70 {2.60} {1.75) {2.60} {0.66} {6.69} {3.54} (0.12) (0.08) {0.79} {2.03} (0.15) {0.08} {2.05) (2. 76} @) See over for explanation of Notes @ and @ Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 15 Date April 2007 Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale f=} Design MKTG. Q.A. Page 1 of 2 202K 1 XX Specification Pent Manber Raychem 202K1** Issue 15 Control Drawing Iss. Date Eee. Details of Change 7 August 1986 4865 Jo Dimension moved, & 2.0 Dia note added 8 August 1986 4865 Jo dimension changed 3 |February 2000 | CROO-HM-0001 Injection point note added 10 April 2001 CRO1-HM-0008 Redrawn to include inches 11 |February 2002 | CRO2-HM-0003 /180 added to -3 & -4 12 March 2002 CRO2-HM-0001 Note @) added (on 121 JW is 0.9 for -25) 13 June 2002 CRO2-HM-O001v2 | Note @) removed 14 |February 2005 | HO307 JW was 1.0 1s April 2007 CRO7-HM-010 Document title was 202K121 thru 185 (Ordering Information) 202K TREK 7 RO Adhesive Slash Number Cif required see compatibility chart) Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number| Material Description SPEC Number Coating Slash Number POLYOLEFIN, FLEXIBLE RT-1304 RT-1050 /42_,/86, /180 SILICON RT-602, _RK-6706 N/A = Z / / NOTES Supplied with 2 Lips only, Dimension V does not apply. Potting Port X @ 90 to Potting Port Y on 202K121. If eyelet clip COOOW212) is required with part then add C5-1858 to description Ci.e. 202K132-3-CS-1858-0) . As supplied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. Potting Ports are optional, when specified by suffix -00 they will be Located as shown. For -12 SCD see 202K1*x-12, For -100 SCD see 202K1*x-100. On some parts a bump or depression at the material injection point may exist as a normal L OWO manufacturing process. Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 94025 England USA Telephone: (01793) 528171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code K1010 Cage Code 060390 Page 2 of 2