Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR General Description Features The AZ1117B is a low dropout three-terminal regulator. * * * PSRR at IOUT=300mA and f=120Hz: 70dB Output Voltage Accuracy: 1% On-chip Thermal Shutdown Maximum Quiescent Current: IQMAX=6mA LE * * * TE The AZ1117B has been optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and thermal shutdown. Its circuit includes a trimmed bandgap reference to assure output voltage accuracy to be within 1%. On-chip thermal shutdown provides protection against a combination of high current and ambient temperature that would create excessive junction temperature. Current Limit: 1.0A (Typ.) Output Noise from 10Hz to 10KHz: 0.003% of VOUT * Operation Junction Temperature: -20 to 125oC Applications The AZ1117B is available in 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V fixed output voltage vesions and ADJ output voltage version. The fixed versions integrate the adjust resistors. It is also available in an adjustable version which can set the output voltage with two external resistors. USB Device Add-on Card DVD Player PC Motherboard BS O * * * * O The AZ1117B is available in the industry-standard SOT-223 and SOT-89 power packages. SOT-89 SOT-223 Figure 1. Package Type of AZ1117B Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 1 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR TE Pin Configuration H Package (SOT-223) 3 INPUT 2 OUTPUT 1 ADJ/GND VOUT LE VOUT R Package (SOT-89) 3 INPUT 2 OUTPUT 1 ADJ/GND O Figure 2. Pin Configuration of AZ1117B (Top View) BS Functional Block Diagram INPUT O 3 Thermal Protection + 2 OUTPUT For Adjustable Output, disconnect A1 and A2, connect B For Fixed Output, connect A1 and A2, disconnect B A1 A2 1 B ADJ/GND Figure 3. Functional Block Diagram of AZ1117B Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 2 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Ordering Information - TE AZ1117B E1: Lead Free Circuit Type TR: Tape and Reel Package H: SOT-223 ADJ: Adjustable Output 1.2: Fixed Output 1.2V 1.5: Fixed Output 1.5V 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 3.3: Fixed Output 3.3V 5.0: Fixed Output 5.0V Temperature Range Part Number -20 O SOT-223 to 125oC SOT-89 -20 to 125oC Marking ID Packing Type AZ1117BH-ADJTRE1 EH17K Tape & Reel AZ1117BH-1.2TRE1 EH17P Tape & Reel AZ1117BH-1.5TRE1 EH17Q Tape & Reel AZ1117BH-1.8TRE1 EH17L Tape & Reel AZ1117BH-2.5TRE1 EH17N Tape & Reel AZ1117BH-3.3TRE1 EH17M Tape & Reel AZ1117BH-5.0TRE1 EH17R Tape & Reel AZ1117BR-ADJTRE1 E31F Tape & Reel AZ1117BR-1.2TRE1 E31G Tape & Reel AZ1117BR-1.5TRE1 E31H Tape & Reel AZ1117BR-1.8TRE1 E31J Tape & Reel AZ1117BR-2.5TRE1 E31K Tape & Reel AZ1117BR-3.3TRE1 E31L Tape & Reel AZ1117BR-5.0TRE1 E31M Tape & Reel BS Package O LE R: SOT-89 BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 3 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Absolute Maximum Ratings (Note 1) Symbol Input Voltage VIN Operating Junction Temperature Range Value 18 TJ TSTG Thermal Resistance (No Heatsink) Lead Temperature (Soldering, 10sec) JA V 150 o -65 to 150 o SOT-223 150 SOT-89 210 LE Storage Temperature Range Unit TE Parameter C o C/W oC 260 TLEAD C BS O Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. O Recommended Operating Conditions Parameter Symbol Input Voltage VIN Operating Junction Temperature Range TJ Min -20 Jan. 2013 Rev. 2. 3 Max Unit 15 V 125 o C BCD Semiconductor Manufacturing Limited 4 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics AZ1117B-ADJ Electrical Characteristics TE Operating Conditions: VIN=VOUT+2V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Reference Voltage VREF VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 1.5VVIN-VOUT10V Min Typ Max 1.238 1.250 1.262 1.225 1.250 1.270 0.001 0.1 1.5VVIN-VOUT 10V VREF=1%, IOUT=0.8A BS O Line Regulation Adjust Pin Current Conditions Symbol LE Parameter 0.2 0.4 1.0 SOT-223 1.2 1.3 SOT-89 1.2 0.85 Unit V % % V 1 1.15 A 60 120 A Adjust Pin Current Change 1.5V(VIN-VOUT)10V 0.2 5 A Minimum Load Current 1.5V(VIN-VOUT)10V 1.7 5 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC SOT-223 33 oC/ SOT-89 39 W Ripple Rejection PSRR O Temperature Stability RMS Output Noise (% of VOUT) TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Thermal Resistance JC Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 5 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-1.2 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Conditions Symbol VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 3.2VVIN10V VOUT=1%, IOUT=0.8A IQ Ripple Rejection PSRR 1.224 1.152 1.2 1.228 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 V mV mV V IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC SOT-223 33 oC/ SOT-89 39 W TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O 1.2 A RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC 1.176 Unit 1.15 Temperature Stability Thermal Resistance Max 1 BS Quiescent Current Typ 1.5VVIN-VOUT10V O Output Voltage Min LE Parameter Jan. 2013 Rev. 2. 3 0.85 BCD Semiconductor Manufacturing Limited 6 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-1.5 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Conditions Symbol VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 3.5VVIN10V VOUT=1%, IOUT=0.8A IQ Ripple Rejection PSRR 1.515 1.470 1.5 1.530 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 V mV mV V IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC SOT-223 33 oC/ SOT-89 39 W TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O 1.5 A RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC 1.485 Unit 1.15 Temperature Stability Thermal Resistance Max 1 BS Quiescent Current Typ 1.5VVIN-VOUT10V O Output Voltage Min LE Parameter Jan. 2013 Rev. 2. 3 0.85 BCD Semiconductor Manufacturing Limited 7 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-1.8 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Conditions Symbol VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 3.8VVIN10V VOUT=1%, IOUT=0.8A IQ Ripple Rejection PSRR 1.818 1.764 1.8 1.836 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 V mV mV V IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O 1.8 A RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC 1.782 Unit 1.15 Temperature Stability Thermal Resistance Max 1 BS Quiescent Current Typ 1.5VVIN-VOUT10V O Output Voltage Min LE Parameter 0.85 SOT-223 33 SOT-89 39 Jan. 2013 Rev. 2. 3 o C/W BCD Semiconductor Manufacturing Limited 8 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-2.5 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT IQ PSRR VOUT=1%, IOUT=0.8A 2.475 2.5 2.525 2.455 2.5 2.545 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 Unit V mV mV V A IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O Max 1.15 RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC Typ 1 Temperature Stability Thermal Resistance Min 1.5VVIN-VOUT10V BS Ripple Rejection 4.5VVIN10V O Output Voltage Quiescent Current Conditions Symbol LE Parameter 0.85 SOT-223 33 SOT-89 39 Jan. 2013 Rev. 2. 3 o C/W BCD Semiconductor Manufacturing Limited 9 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-3.3 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Conditions Symbol VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 5.3VVIN10V VOUT=1%, IOUT=0.8A IQ Ripple Rejection PSRR 3.333 3.235 3.3 3.365 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 V mV mV V IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O 3.3 A RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC 3.267 Unit 1.15 Temperature Stability Thermal Resistance Max 1 BS Quiescent Current Typ 1.5VVIN-VOUT10V O Output Voltage Min LE Parameter 0.85 SOT-223 33 SOT-89 39 Jan. 2013 Rev. 2. 3 oC/W BCD Semiconductor Manufacturing Limited 10 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-5.0 Electrical Characteristics TE Operating Conditions: VIN10V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 125oC. Conditions Symbol VOUT Line Regulation VRLINE Load Regulation VRLOAD Dropout Voltage VDROP Current Limit ILIMIT 6.5VVIN10V VOUT=1%, IOUT=0.8A IQ Ripple Rejection PSRR 5.050 4.900 5.0 5.100 0.5 6 10 2 15 SOT-223 1.2 1.3 SOT-89 1.2 V mV mV V IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature O 5.0 A RMS Output Noise (% of VOUT) Thermal Shutdown Hysteresis JC 4.950 Unit 1.15 Temperature Stability Thermal Resistance Max 1 BS Quiescent Current Typ 1.5VVIN-VOUT10V O Output Voltage Min LE Parameter 0.85 SOT-223 33 SOT-89 39 Jan. 2013 Rev. 2. 3 oC/W BCD Semiconductor Manufacturing Limited 11 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR TE Typical Performance Characteristics 10 AZ1117B-2.5V VIN=4.5V to 10V 0.4 Load Regulation (mV) -0.2 IOUT=10mA to 800mA 0 -5 LE Line Regulation (mV) IOUT=10mA 0.2 0.0 AZ1117B-2.5V VIN=4.5V 5 -10 -15 -20 -0.4 0 20 40 60 80 100 120 O -20 -25 -20 0 20 o O 1.270 BS Figure 4. Line Regulation vs. Junction Temperature 1.265 1.255 AZ1117B-2.5V VIN=4.5V IOUT=10mA 2.54 IOUT=10mA 1.235 2.52 2.50 2.48 2.46 1.230 2.44 1.225 2.42 40 60 80 100 120 Figure 5. Load Regulation vs. Junction Temperature 2.56 1.240 20 100 2.58 1.245 0 80 2.60 1.250 1.220 -20 60 Junction Temperature ( C) Reference Voltage AZ1117B-ADJ VIN=4.5V Output Voltage (V) Reference Voltage (V) 1.260 40 o Junction Temperature ( C) 2.40 -20 120 o Junction Temperature ( C) 0 20 40 60 80 100 120 o Junction Temperature ( C) Figure 6. Reference Voltage vs. Junction Temperature Figure 7. Output Voltage vs. Junction Temperature Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 12 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR TE Typical Performance Characteristics (Continued) 100 3 AZ1117B-ADJ VIN=4.5V AZ1117B-ADJ VIN=4.5V 90 Adjust Pin Current (A) 80 1 70 60 LE Minimum Load Current (mA) Minimum Load Current 2 0 50 40 30 20 -1 10 0 20 40 0 -20 O -2 -20 60 80 100 120 0 20 1.3 BS 9 o -40 C o -25 C o 25 C o 100 C 120 AZ1117-2.5V SOT-223 No Heatsink 8 Power Dissipation (W) Dropout Voltage (V) 100 Figure 9. Adjust Pin Current vs. Junction Temperature AZ1117B-2.5 SOT-223 VIN=4.5V 1.2 80 10 O 1.4 60 Junction Temperature ( C) Junction Temperature ( C) Figure 8. Minimum Load Current vs. Junction Temperature 40 o o 1.1 1.0 7 6 5 4 3 2 0.9 1 0.8 0 100 200 300 400 500 600 700 800 900 0 -20 1000 0 20 40 60 o 80 100 120 Case Temperature ( C) Output Current (mA) Figure 11. Power Dissipation vs. Case Temperature Figure 10. Dropout Voltage vs. Output Current Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 13 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR TE Typical Performance Characteristics (Continued) VOUT (50mV/Div) VOUT (0.1V/Div) 0.2 0.1 0 50 0 -50 LE -0.1 100 IOUT (0.3A/Div) 0.6 VIN (0.5V/Div) 5.3 4.8 O 4.3 3.8 0.3 0 10mA -0.3 -0.6 Time (20s/Div) Time (10s/Div) Figure 13. Load Transient Response 1.6 O 80 BS Figure 12. Line Transient Response 70 1.4 1.2 Current Limit (A) PSRR (dB) 60 50 40 30 1.0 0.8 0.6 AZ1117B-2.5V VIN=4.5V 0.4 20 10 10 No Heatsink @VOUT=VOUT(nom)x98% 0.2 100 1k 10k 0.0 -20 100k 0 20 40 60 80 100 120 o Junction Temperature ( C) Frequency (Hz) Figure 14. PSRR vs. Frequency Figure 15. Current Limit vs. Junction Temperature Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 14 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR TE Typical Performance Characteristics (Continued) 1.4 AZ1117B-2.5 SOT-223 100mA 400mA 600mA 800mA 1.2 LE Dropout Voltage (V) 1.3 1.1 1.0 0.8 -20 0 20 40 O 0.9 60 80 100 o Junction Temperature ( C) O BS Figure 16. Dropout Voltage vs. Junction Temperature Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 15 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR VIN=11V 9V AZ1117B-ADJ 10F + VIN TE Typical Applications VOUT ADJ + 22F LE R1 124 VOUT=VREF * ( 1+R2/R1) + IADJ * R2 O R2 768 VIN=5.3V BS AZ1117B-3.3 + O 10F VIN VOUT GND 3.3V + 22F Figure 17. Typical Applications of AZ1117B Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 16 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions LE 6.300(0.248) 6.700(0.264) Unit: mm(inch) TE SOT-223 2.900(0.114) 3.100(0.122) ) 0.250(0.010 ) 4 1 0.350(0.0 0.900(0.035) 3.700(0.146) 3.300(0.130) O BS 7.300(0.287) 6.700(0.264) MIN 0.250(0.010) 1.750(0.069) TYP O 2.300(0.091) 0.610(0.024) 0.810(0.032) TYP 4.500(0.177) 0 10 4.700(0.185) 0.020(0.001) 0.100(0.004) 1.500(0.059) 1.520(0.060) 1.700(0.067) 1.800(0.071) Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 17 Part Obsolete Data Sheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions (Continued) 1.550(0.061)REF TE 4.400(0.173) 4.600(0.181) Unit: mm(inch) LE SOT-89 1.030(0.041)REF 1.400(0.055) 1.600(0.063) 45 BS 0.900(0.035) 1.100(0.043) 2.300(0.091) 2.600(0.102) O 3.950(0.156) 4.250(0.167) 0.320(0.013) 0.520(0.020) 0.480(0.019) 0.320(0.013) 0.520(0.020) 2.060(0.081)REF 3 10 0.350(0.014) 0.450(0.018) O 3.000(0.118) TYP 1.500(0.059) 1.800(0.071) 0.320(0.013)REF 3 2.210(0.087)REF 1.620(0.064)REF R0.150(0.006) 10 Jan. 2013 Rev. 2. 3 BCD Semiconductor Manufacturing Limited 18 LE TE Part Obsolete O BCD Semiconductor Manufacturing Limited O BS http://www.bcdsemi.com IMPORTANT IMPORTANT NOTICE NOTICE BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifiBCD cations herein. herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any cations particular purpose, nor nor does does BCD BCD Semiconductor particular purpose, Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of circuits. BCD of any any its its products products or or circuits. BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights of of others. others. other rights rights nor nor the the rights MAIN SITE MAIN SITE - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788