www.osram-os.com Produktdatenblatt | Version 1.1 SFH 205 F SFH 205 F Radial Sidelooker Silicon PIN Photodiode with Daylight Blocking Filter Applications ----Electronic Equipment ----Smoke Detectors ----Highbay Industrial ----White Goods ----Industrial Automation (Machine Controls, Light Barriers, Vision Controls) Features: ----Package: black epoxy ----ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ----Especially suitable for applications of 950 nm ----Short switching time (typ. 20 ns) ----5 mm LED plastic package ----Also available on tape and reel Ordering Information Photocurrent Ordering Code typ. Ee=1mW/cm; =950nm; VR=5V Ee=1mW/cm; =950nm; VR=5V IP IP SFH 205 F 45 A Photocurrent Type 1 Version 1.5 | 2019-07-10 60 A Q62702P0102 SFH 205 F Maximum Ratings TA=25C Parameter Symbol Operating Temperature Top min. max. -40 C 100 C Storage temperature Tstg min. max. -40 C 100 C Reverse voltage VR max. 5V Reverse voltage t2s; TA=25C VR max. 32 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.5 | 2019-07-10 Values SFH 205 F Characteristics TA=25C Parameter Symbol Wavelength of max sensitivity S max typ. 950 nm Spectral range of sensitivity 10% typ. 800...1100 nm Radiant sensitive area A typ. 7.02 mm Dimensions of active chip area LxW typ. 2.65x2.65 mmxmm Half angle typ. 60 Dark current VR=10V IR typ. max. Spectral sensitivity of the chip =950nm S typ. 0.7 A / W Quantum yield of the chip =950nm typ. 0.91 Electrons / Photon Open-circuit voltage Ee=0.5mW/cm; =950nm VO min. typ. 250 mV 330 mV Short-circuit current Ee=0.5mW/cm; =950nm ISC typ. 28 A Rise time VR=5V; RL=50; =850nm; IP=800A tr typ. 0.02 s Fall time VR=5V; RL=50; =850nm; IP=800A tf typ. 0.02 s Forward voltage IF=100mA; E=0 VF typ. 1.3 V C0 typ. 72 pF Temperature coefficient of voltage TCV typ. -2.6 mV / K Temperature coefficient of short-circuit current =950nm TCI typ. 0.18 % / K Noise equivalent power VR=10V; =950nm NEP typ. 0.036 pW / Hz1/2 Detection limit VR=10V; =950nm D* typ. 7.3e12 cm x Hz1/2 / W Capacitance VR=0V; f=1MHz; E=0 3 Version 1.5 | 2019-07-10 Values 2 nA 30 nA SFH 205 F Relative Spectral Sensitivity 1), 2) Srel=f() Directional Characteristics 1), 2) Srel=f() 40 30 20 10 50 0 1.0 0.8 60 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF01402 4 Version 1.5 | 2019-07-10 0.6 0.4 0 20 40 60 80 100 120 SFH 205 F Photocurrent/Open-Circuit Voltage IP (VR=5V)/VO=f(Ee) P 1), 2) Dark Current 1), 2) IR=f(VR);E=0 OHF01097 10 3 A 10 2 10 4 mV OHF00080 4000 VO R pA 10 3 3000 10 2 2000 10 1 1000 10 0 0 VO 10 1 P 10 0 10 -1 0 10 10 1 10 2 W/cm 2 10 4 Ee Capacitance 1), 2) C=f(VR); f=1MHz; E=0; TA=25C OHF00081 100 C pF 80 70 60 50 40 30 20 10 10 -1 10 0 10 1 0 -2 10 5 Version 1.5 | 2019-07-10 V 10 2 VR 0 5 10 15 V VR 20 SFH 205 F Dark Current 1) IR=f(TA); E=0; VR=10V Power Consumption Ptot=f(TA) OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.5 | 2019-07-10 80 C 100 TA SFH 205 F Dimensional Drawing 3) 0.6 (0.024) 0.4 (0.016) 4.0 (0.157) 34 (1.339) 32 (1.260) Further Information Approximate Weight: 276.0 mg Package marking: Cathode 7 Version 1.5 | 2019-07-10 Radiant sensitive area 1.8 (0.071) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 6.3 (0.248) 2.54 (0.100) spacing 6.9 (0.272) 5.1 (0.201) 4.7 (0.185) 0.5 (0.020) 0.3 (0.012) Area not flat 4.1 (0.161) 3.7 (0.146) Cathode GEOY6651 SFH 205 F Recommended Solder Pad Pad 1: anode 8 Version 1.5 | 2019-07-10 3) SFH 205 F TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.5 | 2019-07-10 SFH 205 F Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. OSRAM Opto Semiconductors declares that this product contains DEHP (Diethylhexylphthalat) CAS 11781-7 above the current RoHS and REACh SVHC limit of 0.1%. A full Product Material Data Sheet (MDS) is available on request. Packing information is available on the internet (online product catalog). For further application related information please visit www.osram-os.com/appnotes 10 Version 1.5 | 2019-07-10 SFH 205 F Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office.By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred Product and functional safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. OSRAM OS products are not qualified at module and system level for such application. In case Buyer - or Customer supplied by Buyer - considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales Partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.5 | 2019-07-10 SFH 205 F Glossary 1) Typical Values:Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2) Testing temperature:TA = 25C (unless otherwise specified) 3) Tolerance of Measure:Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 12 Version 1.5 | 2019-07-10 SFH 205 F Revision History Version Date Change 1.4 2019-06-24 Disclaimer 1.5 2019-07-10 Notes 13 Version 1.5 | 2019-07-10 SFH 205 F 14 Version 1.5 | 2019-07-10 SFH 205 F 15 Version 1.5 | 2019-07-10