SFH 205 F
1Version 1.5 | 2019-07-10
Produktdatenblatt | Version 1.1
www.osram-os.com
Applications
SFH 205 F
Radial Sidelooker
Silicon PIN Photodiode with Daylight Blocking Filter
—Electronic Equipment
—Highbay Industrial
—Industrial Automation (Machine Controls, Light
Barriers, Vision Controls)
—Smoke Detectors
—White Goods
Features:
—Package: black epoxy
—ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
—Especially suitable for applications of 950 nm
—Short switching time (typ. 20 ns)
—5 mm LED plastic package
—Also available on tape and reel
Ordering Information
Type Photocurrent Photocurrent Ordering Code
typ.
Ee = 1 mW/cm²;
λ
= 950 nm; VR = 5 V Ee = 1 mW/cm²;
λ
= 950 nm; VR = 5 V
IPIP
SFH 205 F ≥ 45 µA 60 µA Q62702P0102
SFH 205 F
2Version 1.5 | 2019-07-10
Maximum Ratings
TA = 25 °C
Parameter Symbol Values
Operating Temperature Top min.
max.
-40 °C
100 °C
Storage temperature Tstg min.
max.
-40 °C
100 °C
Reverse voltage VRmax. 5 V
Reverse voltage
t ≤ 2 µs; TA = 25 °C
VRmax. 32 V
Total power dissipation Ptot max. 150 mW
ESD withstand voltage
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD max. 2 kV
SFH 205 F
3Version 1.5 | 2019-07-10
Characteristics
TA = 25 °C
Parameter Symbol Values
Wavelength of max sensitivity λS max typ. 950 nm
Spectral range of sensitivity λ10% typ. 800 ... 1100
nm
Radiant sensitive area A typ. 7.02 mm²
Dimensions of active chip area L x W typ. 2.65 x 2.65
mm x mm
Half angle φtyp. 60 °
Dark current
VR = 10 V
IRtyp.
max.
2 nA
30 nA
Spectral sensitivity of the chip
λ = 950 nm
Sλtyp. 0.7 A / W
Quantum yield of the chip
λ = 950 nm
ηtyp. 0.91 Electrons
/ Photon
Open-circuit voltage
Ee = 0.5 mW/cm²; λ = 950 nm
VOmin.
typ.
250 mV
330 mV
Short-circuit current
Ee = 0.5 mW/cm²; λ = 950 nm
ISC typ. 28 µA
Rise time
VR = 5 V; RL = 50 Ω; λ = 850 nm; IP = 800 µA
trtyp. 0.02 µs
Fall time
VR = 5 V; RL = 50 Ω; λ = 850 nm; IP = 800 µA
tftyp. 0.02 µs
Forward voltage
IF = 100 mA; E = 0
VFtyp. 1.3 V
Capacitance
VR = 0 V; f = 1 MHz; E = 0
C0typ. 72 pF
Temperature coecient of voltage TCVtyp. -2.6 mV / K
Temperature coecient of short-circuit current
λ = 950 nm
TCItyp. 0.18 % / K
Noise equivalent power
VR = 10 V; λ = 950 nm
NEP typ. 0.036 pW /
Hz1/2
Detection limit
VR = 10 V; λ = 950 nm
D* typ. 7.3e12 cm x
Hz1/2 / W
SFH 205 F
5Version 1.5 | 2019-07-10
Photocurrent/Open-Circuit Voltage 1), 2)
IP (VR = 5 V) / VO = f (Ee)
E
OHF01097
e
0
10
P
Ι
10
1
10
2
10
4
10
-1
10
0
10
1
10
2
4
10
3
10
2
10
1
10
10
0
V
O
µ
AmV
Ι
P
V
O
3
10
µ
W/cm
2
Dark Current 1), 2)
IR = f (VR); E = 0
0
OHF00080
Ι
R
R
V
0 5 10 15 V 20
1000
2000
3000
4000
pA
Capacitance 1), 2)
C = f (VR); f = 1MHz; E = 0; TA = 25°C
V
OHF00081
R
-2
10
C
0
-1
10
0
10
1
10
2
10V
10
20
30
40
50
60
70
80
pF
100
SFH 205 F
7Version 1.5 | 2019-07-10
Dimensional Drawing 3)
6.9 (0.272)
6.3 (0.248)
4.0 (0.157)
34 (1.339)
32 (1.260)
1.8 (0.071)
1.2 (0.047)
0.8 (0.031)
0.4 (0.016)
2.54 (0.100)
spacing
4.1 (0.161)
3.7 (0.146)
5.1 (0.201)
4.7 (0.185)
Cathode
Area not flat
Radiant sensitive area
GEOY6651
0.4 (0.016)
0.6 (0.024)
0.5 (0.020)
0.3 (0.012)
Further Information
Approximate Weight: 276.0 mg
Package marking: Cathode
SFH 205 F
9Version 1.5 | 2019-07-10
TTW Soldering
IEC-61760-1 TTW
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
∆
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
SFH 205 F
10 Version 1.5 | 2019-07-10
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specied in this
data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-
sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light
sources have a high secondary exposure potential due to their blinding eect. When looking at bright light
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-
tion, annoyance, visual impairment, and even accidents, depending on the situation.
Subcomponents of this device contain, in addition to other substances, metal lled materials including silver.
Metal lled materials can be aected by environments that contain traces of aggressive substances. There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,
production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.
OSRAM Opto Semiconductors declares that this product contains DEHP (Diethylhexylphthalat) CAS 117-
81-7 above the current RoHS and REACh SVHC limit of 0.1%. A full Product Material Data Sheet (MDS) is
available on request.
Packing information is available on the internet (online product catalog).
For further application related information please visit www.osram-os.com/appnotes
SFH 205 F
11 Version 1.5 | 2019-07-10
Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please nd the latest version on the OSRAM OS website.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales oce.By agreement we will take packing material back, if it is sorted. You must bear the costs of
transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we
shall have to invoice you for any costs incurred
Product and functional safety devices/applications or medical devices/applications
OSRAM OS components are not developed, constructed or tested for the application as safety relevant
component or for the application in medical devices.
OSRAM OS products are not qualied at module and system level for such application.
In case Buyer – or Customer supplied by Buyer – considers using OSRAM OS components in product safe-
ty devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales
Partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi-
nate the customer-specic request between OSRAM OS and Buyer and/or Customer.
SFH 205 F
12 Version 1.5 | 2019-07-10
Glossary
1) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reect statistical gures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
2) Testing temperature: TA = 25°C (unless otherwise specied)
3) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specied with ±0.1 and
dimensions are specied in mm.
SFH 205 F
13 Version 1.5 | 2019-07-10
Revision History
Version Date Change
1.4 2019-06-24 Disclaimer
1.5 2019-07-10 Notes
SFH 205 F
14 Version 1.5 | 2019-07-10
SFH 205 F
15 Version 1.5 | 2019-07-10
