TW
CONTENT
DESCRIPTIONAPPLICATIONS
Hybrid D’Sub series
TW / E1
Amphenol D’Sub TW Hybrid Series permits
a mix of contacts including signal, power,
shielded, high voltage and fiber optics in the
same housing with 18 different contacts
arrangements.
This economic series was fist developed from
our military series, and has improved features:
- new contacts
- new high temperature black thermoplastic insert
- PCB configurations come preloaded with
fixed contacts and brackets.
These connectors are supplied with screw
machined contacts which are fixed in the insulator.
Acomplete range of housings are also
available for cable application.
• Commercial
• Medical
• Industrial
• Telecom
• Any application requiring
optimization of space
A full range of
arrangements
compatible with
reflow process
A full range of
arrangements
compatible with
reflow process
Specifications
• Connectors according to: MIL C24308 - NFC93425 - HE507
Materials and platings
Shells Steel-Tin plating
Insulators High temperature black thermoplastic
Signal contacts Female: machined bronze
Material Male: machined brass
Plating finish 16µ “Au over 79µ” Ni min.
Or 30µ” Au over 79µ” Ni min.
Shielded contacts Female: machined bronze
Material Male: machined brass
Plating
Inner conductor 16µ “Au or 30µm Au over 79µ” Ni
Outer ring 10µ “Au over 79µ” Ni
Terminations Tinned
Except solder cup and crimp terminations gold flash
Power contacts Female: machined bronze
Material Male: machined brass
Plating
Contacts 16µ “Au or 30µ” Au over 79µ” Ni
Terminations Tinned
Except solder cup and crimp terminations gold flash
Brackets Steel-Tin plating
Front jackscrews Brass-Tin plating
Rear clinch nuts Brass-Tin plating
Boardlocks Bronze-Tin plating
Stand-off Brass-Tin plating
Electrical Data
Current rating
Signal contacts 7.5 A. with 10 A. peaks
Power contacts
PCB terminations 10 to 40 A.
Solder cup terminations 10 to 40 A.
Crimp terminations 10 to 40 A.
Shielded contacts 0.5 A.
Voltage rating
Signal and power contacts 300 V.R.M.S. at 50 Hz
Shielded contacts 150 V.R.M.S. at 50 Hz
Shielded contacts
Frequency range 0-1 GHz
Attenuation 0.2dB
V. S. W. R. 1.4(+0.04/GHz)
Characteristic impedance 50 Ohms
Dielectric withstanding
voltage ≥ 1000 V.R.M.S. at 50Hz
Insulation resistance ≥ 5000 M Ohms at 500 VDC
Contact resistance ≤ 5m Ohms
Shell resistance ≤ 1m Ohm
(electrical grounding)
Climatic Data
Operating temperature -55˚C + 155˚C
(with peaks up to 180˚C)
Damp heat 56 days (40˚C - 95% HR)
Salt spray 48 hours
Mechanical data
Shells With or without dimples
Contact retention force in dielectric material > 40N
Maximum mating and unmating force
With dimples E size = 70 N
A size = 80 N
B size = 100 N
C size = 150 N
D size = 180 N
Without dimples E size = 30 N
A size = 50 N
B size = 80 N
C size = 120 N
D size = 160 N
Compatible with process
IR - Air convectioned 260˚ for 20 s.
Resistance to solder iron heat 260˚C for 30 s.
Mating cycles ≥ 200 (classe ll) or 500 (classe l)
Blind mating system Available upon request
Polarization Available with locking accessories
Consult factory
Shell and contacts plating
TECHNICAL DATA
2
Housing arrangements
Male front view
5W1
E
Arrangement ......
Shell size ............
Arrangement ......
Shell size ............
Arrangement ......
Shell size ............
Arrangement ......
Shell size ............
Arrangement ......
Shell size ............
Arrangement ......
Shell size ............
7W2
A
11W1
A
3W3
A
5W5
B
9W4
B
13W3
B
17W2
B
21W1
B
27W2
C
13W6
C
17W5
C
21W4
C
8W8
C
25W3
C
24W7
D
36W4
D
43W2
D
CLASS ll
0.4µm (16µ”) Au contacts gold plating
200 mating cycles
Types Shells and plating
Tin plated shell
*Male and female
Tin plated shell with dimples
Male only
77 TW
717 TW
CLASS l
0.76µm (30µ”) Au contacts gold plating
500 mating cycles
Types Shells and plating
Tin plated shell
*Male and female
Tin plated shell with dimples
Male only
177 TW
777 TW
Shell size dimensions
Panel cutouts
Optimal cutout for rear mounting Standard cutout
TECHNICAL DATA
TW / E1
3
ø 3.1
H
J
10˚ 1.5 FA
B
G
B’
D’ D E
0.9
G
A A
B B
D
C
øG G H
RD
C
FE
10˚ 10˚
Rd Rading J Rd Rading J
Shell
size
E
A
B
C
D
Shell
size
E
A
B
C
D
Contact
P: Pin
S: Socket
P
S
P
S
P
S
P
S
P
S
A
±0.25
(±.010)
30.7
(1.209”)
39.0
(1.535”)
52.9
(2.083”)
69.2
(2.724”)
66.8
(2.630”)
B
0/-0.20
(0/-.008)
16.4
(.646”)
24.8
(.976”)
38.5
(1.513”)
54.9
(2.161”)
52.5
(2.067”)
B‘
+0.20/0
(+.008/0)
16.8
(.661”)
25.1
(.988”)
38.8
(1.528”)
55.3
(2.177”)
52.7
(2.075”)
D‘
+0.25/0
(+.010/0)
8
.2
(.323”)
8.2
(.323”)
8.2
(.323”)
8.2
(.323”)
11.0
(.433”)
C
±0.10
(±.004)
25.0
(.984”)
33.3
(1.311”)
47.0
(1.850”)
63.5
(2.500”)
61.1
(2.406”)
D
0/-0.25
(0/-.010)
8.0
(.315”)
8.0
(.315”)
8.0
(.315”)
8.0
(.315”)
10.9
(.429”)
E
±0.20
(±.008)
12.4
(.488”)
12.4
(.488”)
12.4
(.488”)
12.4
(.488”)
15.2
(.598”)
F
+0.05/-0.20
(+.002/-.008)
11.1
(.437)
11.1
(.437)
11.1
(.437)
11.1
(.437)
11.1
(.437)
F‘
+0.10/-0.20
(+.004/-.008)
10.9
(.429”)
10.9
(.429”)
11.0
(.433”)
11.0
(.433”)
11.0
(.433”)
G
+0.10/-0.20
(+.004/-.008)
6.2
(.244”)
6.2
(.244”)
6.2
(.244”)
6.2
(.244”)
6.2
(.244”)
G‘
±0.10
(±.004)
5.9
(.232”)
5.9
(.232”)
5.8
(.228”)
5.8
(.228”)
5.8
(.228”)
H
+0.10/-0.40
(+.004/-.016)
19.4
(.764”)
27.7
(1.091”)
41.4
(1.630”)
57.9
(2.280”)
55.5
(2.185”)
J
0/-0.50
(0/-.020)
11.
0
(.433”)
11.0
(
.433”)
11.0
(.
433”)
11.0
(.433”)
13.8
(.543”)
Mounting
method
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
A
±0.20
(±.008)
22.2
(.874”)
20.5
(.807”)
30.5
(1.201”)
28.8
(1.134”)
44.3
(1.744”)
42.5
(1.673”)
60.7
(2.390”)
59.1
(2.327”)
58.3
(2.295”)
56.3
(2.217”)
E
±0.20
(±.008)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
15.8
(.622”)
14.1
(.555”)
F
±0.20
(±.008)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
7.9
(.311”)
7.1
(.280”)
J
±0.20
(±.008)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
B
±0.20
(±.008)
11.1
(.437”)
10.2
(.402”)
15.3
(.602”)
14.4
(.567”)
22.1
(.870”)
21.3
(.839”)
30.4
(1.197”)
29.5
(1.161”)
29.2
(1.150”)
28.2
(1.110”)
C
±0.20
(±.008)
25.0
(.984”)
33.3
(1.311”)
47.0
(1.850”)
63.5
(2.500”)
61.1
(2.406”)
D
±0.20
(±.008)
12.5
(.492”)
16.7
(.657”)
23.5
(.925”)
31.7
(1.248”)
30.6
(1.205”)
G
±0.20
(±.008)
3.0
(.118”)
3.0
(.118”)
3.0
(.118”)
3.0
(.118”)
3.0
(.118”)
H
±0.20
(±.008)
1.5
(.059”)
1.5
(.059”)
1.5
(.059”)
1.5
(.059”)
1.5
(.059”)
Straight connector footprint
TECHNICAL DATA
4
B B B
A A A321
Straight contact combinations
Arrangement with signal contacts
See above dimensions Size 8 and 20 Contacts See above dimensions Size 8 Contacts
Power 3.2 mm DIA. (.126”)
(20 to 40 A) and signal
Power only
3.2 mm DIA. (.126”)
(20 to 40 A)
Arrangement without signal contacts
3W3 - 5W5 - 8W8
P 3SY P 3Y
Power only
2 mm DIA. (.0787”)
(10 to 20 A)
P 2Y
Shielded onlyCY
Power 2 mm DIA. (.0787”)
(10 to 20 A) and signal
Shielded and signal
P 2SY
CSY
Signal only
Signal (Size 20)
with solder cup terminations
Housing preloaded with contacts
SY
No reference
Signal tail 0.6 mm Dia. (.0236”)
1.6 mm (.063”)PCB
For other PCB thickness: consult factory.
Description
Power (.126” tail dia.) 1
Power (.0787” tail dia.) 1
Shielded 3
Signal 2
a
4.80 mm
(.198”)
4.80 mm
(.198”)
4.00 mm
(.157”)
5.00 mm
(.196”)
b
7.2 mm
(.283”)
7.2 mm
(.283”)
7.2 mm
(.283”)
11.50 mm
(.453”)
Dimensions
Right angle connector footprint
Right angle contacts combinations
TECHNICAL DATA
TW / E1
5
Arrangement with signal contacts
Note: above dimensions correpond to sizes E to C. Consult factory for D sizes.
Connector comes equiped with contacts and brackets.
Arrangement without signal contacts
3W3 - 5W5 - 8W8
European Mixed MIL (U.S.) Size 8 and
footprint footprint footprint 20 Contacts
Power 3.2 mm
EP3SV HP3SV MP3SV DIA. (.126”) (20 to
40 A) and signal
Power 2 mm
EP2SV HP2SV MP2SV DIA. (.0787”) (10 to
20 A) and signal
- HCSV MCSV Shielded and signal
ESV HSV MSV Signal only
European Mixed MIL (U.S.) Size 8 contacts
footprint footprint footprint only
Power only
EP3V HP3V MP3V 3.2 mm DIA. (.126”)
(20 to 40 A)
Power only
EP2V HP2V MP2V 2.0 mm DIA. (.0787”)
(10 to 20 A)
- HCV MCV Shielded only
CB
A
C C
B B
A A
1 2 3
Description
Shielded 1
Signal 2
Power (.0787” tail dia.) 3
Power (.126” tail dia.) 3
Europe
HE 5 pattern =
- Europ. height
- Europ. footprint
pitch between
2 rows: .100”
Mix
Mixed pattern =
- MIL height
- Europ. footprint
pitch between
2 rows: .100”
MIL
MIL pattern =
- MIL height
- MIL footprint
pitch between
2 rows: .112”
a
-
10.30mm
(.406”)
11.57mm
(.456”)
21.46mm
(.845”)
b
-
7.20mm
(.283”)
7.20mm
(.283”)
7.20mm
(.283”)
c
-
11.20mm
(.441”)
10.50mm
(.413”)
10.50mm
(.413”)
a
10.30mm
(.406”)
10.30mm
(.406”)
11.57mm
(.456”)
21.46mm
(.845”)
b
6.30mm
(.248”)
6.30mm
(.248”)
6.30mm
(.248”)
6.30mm
(.248”)
c
10.00mm
(.394”)
9.50mm
(.374”)
9.50mm
(.374”)
9.50mm
(.374”)
a
10.30mm
(.406”)
8.10mm
(.319”)
9.52mm
(.375”)
21.46mm
(.845”)
b
6.30mm
(.248”)
6.30mm
(.248”)
6.30mm
(.248”)
6.30mm
(.248”)
c
10.00mm
(.394”)
9.50mm
(.374”)
9.50mm
(.374”)
9.50mm
(.374”)
Signal tail 0.6 mm Dia. (.0236”)
1.6 mm (.063”) PCB
For other PCB thickness: consult factory.
Mounting options
TECHNICAL DATA
6
Mounting options
Right angle version
Connectors come equiped with metal brackets
Straight version
Straight and right angle version
BLANK: 3.10mm (.122”) dia mounting hole
BLANK: 3.10mm (.122”) dia mounting hole
A514: blind mating system FM: float mounting system
RM6: metal brackets + boardlock
RM54: RM5 4.40 threaded
RM53: RM5 M3 threaded
RM84: RM8 4.40 threaded
RM83: RM8 M3 threaded
4F: 4.40 front female screwlock
3F: M3 front female screwlock
4R: 4.40 rear nut
3R: M3 rear nut
Metal bracket
RM6
1.5 max.
ø3
(.118)
(.137)
(.783)
3.5
(.141 max.)
3.6 max.
ø2.2 (.086)
ø2.25
(.088)
3.4
(.134)
19.9
+ 0.25
0
(.059 max.)
7.2 (.283)
RM8
RM5
7.1
(.279)
High power contacts
Solder cup version
Crimp version
TECHNICAL DATA
TW / E1
7
4.80
(.189”)
4.80
(.189”)
22
(.866”)
22
(.866”)
16
(.622”)
øA øB øA øB
5.20
(.205”)
5.20
(.205”)
Plug
L 17DM 53745-8
L 17DM 53745-7
L 17DM 53745-1
Socket
L 17DM 53744-7
L 17DM 53744-6
L 17DM 53744-1
Current
10 to 20 Amp.
20 to 30 Amp.
30 to 40 Amp.
A mm (inch)
1.80 (.071”)
2.80 (.110”)
4.80 (.189”)
B mm (inch)
2.55 (.100”)
3.70 (.145”)
5.60 (.220”)
Trim dimensions: 7.5 mm (.295”)
P/N Dimensions
22
(.866”)
22
(.866”)
øA
øB
øA
øB
Plug
L 17DM 53745-208
L 17DM 53745-207
L 17DM 53745-201
Socket
L 17DM 53744-207
L 17DM 53744-206
L 17DM 53744-201
Current
10 to 20 Amp.
20 to 30 Amp.
30 to 40 Amp.
A mm (inch)
1.80 (.071”)
2.80 (.110”)
4.80 (.189”)
B mm (inch)
2.55 (.100”)
3.70 (.145”)
5.60 (.220”)
Trim dimensions: 7.5 mm (.295”)
Crimping tool for all sizes
L17D479SP
Extraction tool for sizes 8 cts
P/N Dimensions
16
(.622”)
BøD BøD
A
E G
F
Straight shielded contacts
TECHNICAL DATA
8
Straight shielded contacts
Crimp ferrule and inner solder
Ferrule and inner solder
BøD BøD
A
E G
F
Type
plug
plug
plug
plug
socket
socket
socket
socket
P/N
L17DM 53740
L17DM 53740-1
L17DM 53740-3
L17DM 53740-5
L17DM 53742
L17DM 53742-1
L17DM 53742-3
L17DM 53742-5
B
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
23.6 (.929”)
F
6.3 (.248”)
6.3 (.248”)
7.9 (.311”)
7.9 (.311”)
6.3 (.248”)
6.3 (.248”)
7.9 (.311”)
7.9 (.311”)
D
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
Cable - RG
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
Dimensions (inch)
A Max
18.8 (740”)
18.8 (740”)
21.5 (846”)
21.5 (846”)
18.8 (740”)
18.8 (740”)
21.5 (846”)
21.5 (846”)
Trim dimensions (inch)
E
7.9 (.311”)
7.9 (.311”)
9.5 (.374”)
9.5 (.374”)
7.9 (.311”)
7.9 (.311”)
9.5 (.374”)
9.5 (.374”)
G
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
Dimensions (inch) Trim dimensions (inch)Type
short plug
plug
plug
plug
plug
short socket
socket
socket
socket
socket
P/N
L17DM 53740-5000
L17DM 53740-5001
L17DM 53740-5002
L17DM 53740-5005
L17DM 53740-5008
L17DM 53742-5000
L17DM 53742-5001
L17DM 53742-5002
L17DM 53742-5004
L17DM 53742-50060
A Max
17.0 (669”)
18.8 (740”)
21.5 (846”)
21.5 (846”)
18.8 (740”)
17.0 (669”)
18.8 (740”)
21.5 (846”)
21.5 (846”)
18.8 (740”)
B
21.8 (.858”)
23.6 (.929”)
26.3 (1.035”)
26.3 (1.035”)
23.6 (.929”)
21.8 (.858”)
23.6 (.929”)
26.3 (1.035”)
26.3 (1.035”)
23.6 (.929”)
D
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
1.0 (.039”)
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
1.0 (.039”)
Cable - RG
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
178 B/U
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
178 B/U
E
7.9 (.311”)
7.9 (.311”)
9.5 (.374”)
9.5 (.374”)
7.9 (.311”)
7.9 (.311”)
7.9 (.311”)
9.5 (.374”)
9.5 (.374”)
7.9 (.311”)
F
6.3 (.248”)
6.3 (.248”)
7.9 (.311”)
7.9 (.311”)
6.3 (.248”)
6.3 (.248”)
6.3 (.248”)
7.9 (.311”)
7.9 (.311”)
6.3 (.248”)
G
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
2 (.078”)
Right angled shielded contact
Crimping tool
Extraction tool
TECHNICAL DATA
TW / E1
9
Crimp ferrule and inner solder
Ferrule and inner solder
Hand crimp tool
Extraction tool for sizes 8 cts
L17D429SP
A
F
EG
A
B
C
øD
F
E G
B
C
øD
227-0944 (without dies) (M 22 520/5-01)
Dimensions (inch) Trim dimensions (inch)Type
plug
plug
plug
plug
socket
socket
socket
socket
P/N
L17DM 53741
L17DM 53741-1
L17DM 53741-3
L17DM 53741-4
L17DM 53743-2
L17DM 53743-3
L17DM 53743-5
L17DM 53743-6
Cable - RG
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
A Max
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
B
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
D
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
E
9.5 (.374”)
9.5 (.374”)
10.7 (.421”)
10.7 (.421”)
9.5 (.374”)
9.5 (.374”)
10.7 (.421”)
10.7 (.421”)
F
5.9 (.232”)
5.9 (.232”)
7.9 (.311”)
7.9 (.311”)
5.9 (.232”)
5.9 (.232”)
7.9 (.311”)
7.9 (.311”)
G
1.6 (.062”)
1.6 (.062”)
2.4 (.094”)
2.4 (.094”)
1.6 (.062”)
1.6 (.062”)
2.4 (.094”)
2.4 (.094”)
Dimensions (inch) Trim dimensions (inch)Type
plug
plug
plug
plug
socket
socket
socket
socket
P/N
L17DM 53741-5000
L17DM 53741-5001
L17DM 53741-5003
L17DM 53741-5004
L17DM 53743-5000
L17DM 53743-5001
L17DM 53743-5003
L17DM 53743-5004
B
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
18.6 (.732”)
G
1.6 (.062”)
1.6 (.062”)
2.4 (.094”)
2.4 (.094”)
1.6 (.062”)
1.6 (.062”)
2.4 (.094”)
2.4 (.094”)
D
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
1.0 (.039”)
1.7 (.066”)
2.8 (.110”)
3.2 (.126”)
Cable - RG
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
178 B/U
179 B/U 316 B/U
180 B/U
58 C/U
A Max
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
13.5 (.531”)
E
9.5 (.374”)
9.5 (.374”)
10.7 (.421”)
10.7 (.421”)
9.5 (.374”)
9.5 (.374”)
10.7 (.421”)
10.7 (.421”)
F
5.9 (.232”)
5.9 (.232”)
7.9 (.311”)
7.9 (.311”)
5.9 (.232”)
5.9 (.232”)
7.9 (.311”)
7.9 (.311”)
dim. between 2 flat surfaceRG cables
RG 58 C/U
RG 178 B/U
RG 179 B/U
RG 180 B/U
MIL reference
M 22 520/5-05
M 22 520/5-03
M 22 520/5-03
M 22 520/5-05
Amphenol P/N
227 1221-05
227 1221-03
227 1221-03
227 1221-05
cavity A
5.41
-
3.25
-
cavity B
-
2.67
-
4.52
Cabling instructions for shielded contacts
ASSEMBLY INSTRUCTIONS
10
Straight crimp shielded contacts:
Right angle crimp shielded contacts:
Solder straight shielded contacts:
Solder right angle shielded contacts:
inner solder contact
outer crimp contact
inner solder contact
outer crimp contact
soft solder
coaxial shell
outer ring outer ring
braided shield
inner sleeve
soft solder
coaxial shell
outer ring outer ring
solder
braided shield
inner sleeve
crimp 3.20
soft solder
coaxial shell
outer ring outer ring
inner sleeve
crimp
3.20
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Solder the central conductor to the shielded center
contacts.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Using crimp hand tool equipped with the appropriate dies,
crimp in the area defined.
soft solder cap into shell after cable
assembly on 90˚ type coaxes
solder
soft solder
coaxial shell
outer ring
outer ring
inner sleeve
soft solder cap into shell after cable
assembly on 90˚ type coaxes
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Solder the central conductor to the shielded center
contacts.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Solder by introducing metal through the outer ring hole.
How to build your part number
HOW TO ORDER
TW / E1
11
Contacts and Shell
Contact Plating Shell
Tinned Tinned & Indents; Plug only
0.4µm(16µ”) Au 77 717
0.76µm(30µ”) Au 177 777
Shell size and Configuration:
E5W1, A3W3, A7W2, A11W1, B5W5, B9W4, B13W3,
B17W2, B21W1, C8W8, C13W6, C17W5, C21WA4
C25W3, C27W2, D24W7, D36W4, D43W2
RoHS Compliant
Gender:
P: Pin
S: Socket
For right angle
MP3SV: US Footprint, 20-40 Amp power & signal mix
MP2SV: US Footprint, 10-20 Amp power & signal mix
MCSV: US Footprint, Coax & signal mix
MSV: US Footprint, Signal only
MP3V: US Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
MP2V: US Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
MCV: US Footprint, Coax only (3W3, 5W5, 8W8)
EP3SV: European Footprint, 20-40 Amp power & signal mix
EP2SV: European Footprint, 10-20 Amp power & signal mix
...TW...L... ... ... ... ...
Contacts:
For straight
BLANK: Solder-cup signal contacts only
P3SY: 20-40 Amp power & signal mix
P2SY: 10-20 Amp power & signal mix
CSY: Coax & signal mix
SY: Signal only
P3Y: 20-40 Amp power only (3W3, 5W5, 8W8)
P2Y: 10-20 Amp power only (3W3, 5W5, 8W8)
CY: Coax only (3W3, 5W5, 8W8)
ESV: European Footprint, Signal only
EP3V: European Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
EP2V: European Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
HP3SV: Mixed Footprint, 20-40 Amp power & signal mix
HP2SV: Mixed Footprint, 10-20 Amp power & signal mix
HCSV: Mixed Footprint, Coax & signal mix
HSV: Mixed Footprint, Signal only
HP3V: Mixed Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
HP2V: Mixed Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
HCV: Mixed Footprint, Coax only (3W3, 5W5, 8W8)
Panel Mounting Options
For right angle & cable mount
Blank: .120”(3.05mm) Clear Hole
3F: M3 Front Screwlock
3R: M3 Rear Threaded Insert
4F: #4-40 Front Screwlock
4R: #4-40 Threaded Rear Insert
FM: Float mount system
A514: Blind Mate Guide Pin
Board Mounting Options
For Straight
Blank: .120”(3.05mm) Clear Hole
RM53: M3 Threaded (panel side)
standoff with boarlock
RM54: 4-40UNC Threaded (panel side)
standoff with boardlock
RM84: Non-Removable M3 screwlock,
with standoff and boardlock
For Right Angle
RM6: Metal bracket with boardlocks
Special Deviations
Please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.E13/B
12
NOTES
Memo
