M PR E CI ON S I CHI A NE D PIN RECEPTACLES With Organic Fibre Plug(R) Solder Barrier (see specific contact range on pages 216, 217 & 219) PINS * These through-hole (tubular) receptacles are designed for hand, wave or reflow* soldering. The ORGANIC FIBRE PLUG(R) barrier prevents solder, paste or flux from contaminating the spring contact. * After soldering, the OFP(R) barrier is pushed out of the receptacle when the device is plugged in. * All parts are available as discrete receptacles; but for SMT assembly, certain receptacles are supplied on carrier tape per EIA-481 to feed industry standard pick and place machines. *Intrusive reflow (also called "pin-in-paste") is a technique of using conventional through-hole components in a reflow soldering process. The receptacles are placed into plated through-holes in the circuit board (solder paste has previously been screen printed on pads adjacent to the holes) and the board is reflowed in the same pass as other SMT components. Solder will fill the plated through-holes and achieve solder joints as reliable as wave soldering. The OFP(R) barrier prevents solder paste from being picked-up inside the contact during pick `n place assembly. "Overprinting" paste on the solder mask can be used to adjust the volume of paste required to fill each hole. 5359 1,22 DIA. 1,47 DIA. 0,25 0,97 DIA. 1,52 1,8 0,71 DIA. 4015 0577 0,23 5359-0-XX-XX-10-XX-10-0 2,18 1,02 DIA. 0,79 DIA. 1,73 DIA. 0,64 1,32 DIA. 2,54 1,09 DIA. 0,23 0577-0-XX-XX-21-XX-10-0 0,51 2,26 2,54 0,23 4015-0-XX-XX-30-XX-10-0 Solder mount in O1,090,08 PTH. Solder mount in O1,140,08 PTH. Solder mount in O1,450,08 PTH. #10 Contact for O0,3-0,43 pins. #30 Contact for O0,38-0,64 pins. #21 Contact for O0,38-0,56 pins. Also available on 16mm wide carrier Also available on 12mm wide carrier Also available on 8mm wide carrier tape: 3,000 parts per 330mm reel. tape: 3,000 parts per 330mm reel. tape: 5,500 parts per 330mm reel. SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT SOLDER BARRIER: Organic Fibre Plug(R) DIMENSION IN INCHES TOLERANCES ON: LENGTHS: 0,13 DIAMETERS: 0,05 ANGLES: 2 w w w. m i l l - m a x . c o m ORDER CODE: XXXX - 0 - XX - XX - XX - XX -XX - 0 BASIC PART # SPECIFY PACKAGING: SPECIFY CONTACT FINISH: 27 0,76m GOLD OVER NICKEL (RoHS) 43 Discrete Receptacles 67 Supplied on 13" Reels 02 2,54m TIN/LEAD OVER NICKEL 84 2,54m TIN OVER NICKEL (RoHS) SPECIFY SHELL FINISH: 01 5,08m TIN/LEAD OVER NICKEL RoHS 80 5,08m TIN OVER NICKEL (RoHS) CONTACT 2002/95/EC #10, #21 or #30 CONTACT (DATA ON PAGES 216, 217 & 219) 164 516-922-6000