1,22 DIA.
0,97 DIA.
0,71 DIA.
5359-0-XX-XX-10-XX-10-0
Solder mount in Ø1,09±0,08 PTH.
#10 Contact for Ø0,3-0,43 pins.
Also available on 16mm wide carrier
tape: 3,000 parts per 330mm reel.
5359
1,47 DIA.
1,02 DIA.
0,79 DIA.
0577-0-XX-XX-21-XX-10-0
Solder mount in Ø1,14±0,08 PTH.
#21 Contact for Ø0,38-0,56 pins.
Also available on 12mm wide carrier
tape: 3,000 parts per 330mm reel.
0577
1,73 DIA.
1,32 DIA.
1,09 DIA.
4015-0-XX-XX-30-XX-10-0
Solder mount in Ø1,45±0,08 PTH.
#30 Contact for Ø0,38-0,64 pins.
Also available on 8mm wide carrier
tape: 5,500 parts per 330mm reel.
4015
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
SOLDER BARRIER:
Organic Fibre Plug®
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS: ±0,13
DIAMETERS: ±0,05
ANGLES: ± 2°
• These through-hole (tubular) receptacles are designed for
hand, wave or reflow* soldering. The
ORGANIC FIBRE PLUG®
barrier prevents solder, paste or flux from contaminating the
spring contact.
• After soldering, the
OFP®
barrier is pushed out of the recep-
tacle when the device is plugged in.
• All parts are available as discrete receptacles; but for SMT
assembly, certain receptacles are supplied on carrier tape per
EIA-481 to feed industry standard pick and place machines.
*Intrusive reflow (also called "pin-in-paste") is a technique of using conventional
through-hole components in a reflow soldering process. The receptacles are
placed into plated through-holes in the circuit board (solder paste has previous-
ly been screen printed on pads adjacent to the holes) and the board is reflowed in the same pass as other SMT components.
Solder will fill the plated through-holes and achieve solder joints as reliable as wave soldering. The OFP® barrier prevents solder
paste from being picked-up inside the contact during pick ‘n place assembly. "Overprinting" paste on the solder mask can be
used to adjust the volume of paste required to fill each hole.
PIN RECEPTACLES
With Organic Fibre Plug®Solder Barrier
(see specific contact range on pages 216, 217 & 219)
www.mill-max.com 516-922-6000
164
ORDER CODE: XXXX - 0 - XX - XX - XX - XX -XX - 0
BASIC PART #
SPECIFY PACKAGING: SPECIFY CONTACT FINISH:
43 Discrete Receptacles 27
0,76
μm
GOLD OVER NICKEL
(RoHS)
67 Supplied on 13” Reels 02
2,54
μm
TIN/LEAD OVER NICKEL
SPECIFY SHELL FINISH: 84
2,54
μm
TIN OVER NICKEL
(RoHS)
01
5,08
μm
TIN/LEAD OVER NICKEL
80
5,08
μm
TIN OVER NICKEL
(RoHS) CONTACT
#10, #21 or #30 CONTACT (DATA ON PAGES 216, 217 & 219)