Dual-in-line Switches ultra-low profile, for SMT Specifications: Contact rating: Contact resistance: Insulation resistance: Capacity: Dielectric strength: Operating temperature: Mechanical life: Shock resistance: Vibration: Contacts: Terminals: Material: Construction: Mounting: Slide position: 50 V DC, 100 mA < 50 m > 1000 M at 100 V DC maximum 5 pF between 2 poles 500 V, 50 Hz for the duration of 1 minute - 20 to + 80 C minimum 1000 operations per pole contact interruption < 10 sec with triple shock in all 6 directions shock conditions: 20 G, 11 msec duration (sine half wave) contact interruption: < 10 sec at vibration test in accordance with MIL-STD-202 D, method 204, condition C copper beryllium, gold-plated over nickel nickel silver, gold-plated case and slide: PA case sealed, slide recessed, sealed with protective tape on pc-board - SMD OFF Models: 5 Series SMS 500 SMS 502 SMS 504 SMS 506 SMS 508 SMS 510 Poles Length (A) 2 4 6 8 10 6,30 mm 11,40 mm 16,50 mm 21,55 mm 26,65 mm Soldering conditions: reflow-soldering - max.: 40 sec, 200 C peak temperature: 230 C wave soldering possible temperature C Type time/sec Packing: sticks or tapes for order on tape: additional to type number: T example of order: SMS 502 T Models Stick Tape Reel SMS 502 SMS 504 SMS 506 SMS 508 SMS 510 72 pieces; L 507 mm 40 pieces; L 507 mm 28 pieces; L 507 mm 20 pieces; L 507 mm 16 pieces; L 507 mm 2000 pieces 1000 pieces 1000 pieces 1000 pieces 1000 pieces 330 mm 330 mm 330 mm 330 mm 330 mm Tape width (A) 16,0 mm 24,0 mm 24,0 mm 32,0 mm 44,0 mm Rapport (R) 8,0 mm 12,0 mm 12,0 mm 12,0 mm 12,0 mm 8-/10poles R | 129