ALUMINUMELECTROLYTICCAPACITORS UWZ Chip Type, Wide Temperature Range High Temperature (260C) Reflow Corresponding with 260C peak reflow soldering Recomended reflow condition : 260C peak 5 sec 230C over 60 sec 2 times (8 x 6.2, 10 x 10 : 1 time) Chip type operating over wide temperature range of to - 55 to +105C. UWZ Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. High Temperature Reflow UWT Specifications Performance Characteristics Item Category Temperature Range -55 to +105C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1500F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz at 20C 6.3 0.30 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 10 0.24 16 0.20 25 0.16 35 0.14 50 0.14 Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 40C / Z+20C The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. Endurance Resistance to soldering heat Marking Chip Type B0.2 H +0.1 -0.2 H H L0.3 Within 25% of the initial capacitance value for capacitors of 16V or less. Within 20% of the initial capacitance value for capacitors of 25V or more. 200% or less than the initial specified value tan Leakage current Less than or equal to the initial specified value 0.5 MAX. 2 3 1 L0.5 H 5 4 6 5 7 6 8 7 9 8 10 11 12 13 14 9 10 11 12 13 14 D code D 4 to 6.3 (5.4L) GB 4 to 6.3 (5.4L) 6.3 to 10 (L 5.8L) GS 6.3 to 10 (L 5.8L) D xL A B Positive E 0.5 MAX. 0.5 MAX. C0.2 L Negative Negative code GB GS Package code Package code Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) Rated capacitance (33F) Rated capacitance (33F) Rated voltage (6.3V) Rated voltage (6.3V) Series name Series name Type Type Negative Negative A0.2 E A0.2 B0.2 H 3 Positive A0.2 E A0.2 L0.5 Capacitance Lot No. Capacitance C0.2 B0.2 D0.5 Series Plastic platform Plastic platform 0.3 MAX. 0.3 MAX. 4 2 (mm) Positive D0.5 A2 220E WZ A2 220E WZ 1 U WUZW0Z J 0 3J 3303M0 CM LC1LG1BG B C Voltage (E:25V) Voltage (E:25V) Series Positive 0.5 MAX. A0.2 E A0.2 H (8 x(8 10, x10x10) 10, 10x10) Lot No. 50 2 3 Capacitance change A0.2 E A0.2 L0.3 C0.2 B0.2 B0.2 D0.5 D0.5 Series A2 220j WZ A2 220j WZ Series C0.2 0.5 MAX. Positive Plastic platform Plastic platform 0.3 MAX. 0.3 MAX. Capacitance Lot No. Capacitance Trade mark Trade mark 35 2 3 Negative Negative 1 1 Apply to 6.3 x 5.8, 6.3 x 7.7 1 Apply to 6.3 x 5.8, 6.3 x 7.7 (8 x(8 6.2 x) 6.2 ) Voltage ( j:6.3V) Voltage ( j:6.3V) Lot No. 25 2 4 A0.2 E A0.2 (L0.3) L +0.1 -0.2 (L0.3) L 1 C0.2 A0.2 E A0.2 C0.2 B0.2 D0.5 D0.5 Series A2 33C WZ A2 33C WZ Series Plastic platform Plastic platform 0.3 MAX. 0.3 MAX. 0.5 MAX. Positive Capacitance Lot No. Capacitance Trade mark Trade mark 16 2 4 Type numbering system (Example : 6.3V 33F) (4 to(4 6.3 to )6.3 ) Lot No. 10 3 8 After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within 10% of the initial capacitance value maintained at 250C. The capacitors shall meet the Less than or equal to the initial specified value tan characteristic requirements listed at right when they are Less than or equal to the initial specified value Leakage current removed from the plate and restored to 20C. Black print on the case top. Shelf Life Voltage (C:16V) Voltage (C:16V) 6.3 4 8 H (mm) D4xxL5.4 5 x 5.4 6.3 x 5.4 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 4 x 5.4 5 x 5.4 6.3 x 5.4 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 1.8 A 1.8 4.3 B 4.3 4.3 C 4.3 1.0 E 1.0 5.4 L 5.4 2.1 5.3 5.3 1.3 5.4 2.1 5.3 5.3 1.3 5.4 2.4 6.6 6.6 2.2 5.4 2.4 6.6 6.6 2.2 5.4 2.4 6.6 6.6 2.2 5.8 2.4 6.6 6.6 2.2 5.8 2.4 6.6 6.6 2.2 7.7 2.4 6.6 6.6 2.2 7.7 3.3 8.3 8.3 2.3 6.2 3.3 8.3 8.3 2.3 6.2 2.9 2.9 3.2 3.2 8.3 10.3 8.3 10.3 8.3 10.3 8.3 10.3 3.1 10 3.1 10 4.5 10 4.5 10 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Voltage V 6.3 10 16 25 35 50 Code j A C E V H Dimension table in next page. 118 CAT.8100H ALUMINUMELECTROLYTICCAPACITORS UWZ Dimensions Cap. (F) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 1 010 4 x 5.4 6.3 2.2 2R2 4 x 5.4 11 3.3 3R3 4 x 5.4 14 4.7 4R7 4 x 5.4 13 4 x 5.4 15 5 x 5.4 19 4 x 5.4 18 5 x 5.4 23 5 x 5.4 25 6.3 x 5.4 30 27 5 x 5.4 30 6.3 x 5.4 38 6.3 x 5.4 42 8 x 6.2 51 5 x 5.4 35 6.3 x 5.4 40 6.3 x 5.4 48 8 x 6.2 59 6.3 x 7.7 60 36 6.3 x 5.4 46 6.3 x 5.4 50 8 x 6.2 66 6.3 x 5.8 63 6.3 x 7.7 63 60 6.3 x 5.4 60 6.3 x 5.4 60 6.3 x 7.7 91 6.3 x 7.7 84 8 x 10 140 6.3 x 5.8 86 6.3 x 5.8 86 6.3 x 7.7 95 8 x 10 140 8 x 10 155 10 x 10 180 8 x 6.2 102 6.3 x 7.7 105 6.3 x 7.7 105 8 x 10 155 10 x 10 190 10 x 10 220 331 6.3 x 7.7 105 8 x 10 195 8 x 10 195 10 x 10 190 10 x 10 300 470 471 8 x 10 210 8 x 10 210 8 x 10 210 10 x 10 300 680 681 8 x 10 210 10 x 10 310 10 x 10 310 1000 102 10 x 10 230 10 x 10 310 1500 152 10 x 10 310 10 100 22 220 4 x 5.4 22 5 x 5.4 33 330 5 x 5.4 30 47 470 5 x 5.4 100 101 6.3 x 5.4 150 151 220 221 330 Case size D x L (mm) Rated ripple Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 119 CAT.8100H