7.62mm (0.3 INCH) SINGLE COLOR DOT MATRIX DISPLAY Part Number: TA03-11GT Green Features Description z 0.3 inch matrix height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z Stackable vertically and horizontally. z Easy mounting on p.c. boards or sockets. z Mechanically rugged. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010 Selection Guide Part No. Dice TA03-11GT Iv (ucd) [1] @ 10mA Lens Type Green (GaP) Green Transparent Min. Typ. 3600 8300 *1400 *3000 Description Column Anode Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010 Green TA03-11GT SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010 PACKING & LABEL SPECIFICATIONS TA03-11GT SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010 SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAD6752 REV NO: V.5A DATE: MAY/15/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000010