APC-8 8W Single Output Switching Power Supply IP42 Features Constant current design Universal AC input / Full range Class power unit, no FG Fully isolated plastic case IP42 design Small and compact size Cooling by free air convection Protection:Short circuit No load power consumption <0.5W 100% full load burn-in test Low cost / High reliability 2 years warranty series IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL (optional) R-41027766 Applications Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices) Description APC-8 series is one 8W AC/DC constant current mode single output LED power supply. It accepts the full range input 90~264VAC and provides four models with different output current, 250mA, 350mA, 500mA and 700mA, respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APC-8 ideally fits the entry-level LED applications. Model Encoding APC - 8 - 350 Output current Output wattage Series name File Name:APC-8-SPEC 2018-09-29 APC-8 8W Single Output Switching Power Supply series SPECIFICATION MODEL RATED CURRENT OPERATING VOLTAGE RANGE Note.4 RATED POWER OUTPUT RIPPLE & NOISE (max.) Note.2 APC-8-250 APC-8-350 APC-8-500 APC-8-700 250mA 350mA 500mA 700mA 16~32V 11~23V 8~16V 6~11V 8W 8.05W 8W 7.7W 350mVp-p 300mVp-p 300mVp-p 250mVp-p 29V 24V 17V NO LOAD OUTPUT VOLTAGE(max.) 38V INPUT CURRENT ACCURACY 8.0% SETUP, RISE TIME 500ms, 180ms / 230VAC HOLD UP TIME (Typ.) 20ms/230VAC at full load VOLTAGE RANGE 90 ~ 264VAC Note.3 3000ms, 150ms / 115VAC at full load 127 ~ 370VDC (Note.5) FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 82.5% AC CURRENT 0.15A/230VAC;0.3A/115VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=120s measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT 0.25mA / 240VAC PROTECTION SHORT CIRCUIT 81.5% 81% 80% Hiccup mode, recovers automatically after fault condition is removed. WORKING TEMP. -30 ~ 70(Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.2%/ (0 ~45) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750,CSA C22.2 No.250.0-08, BIS IS15885, EAC TP TC 004 approved; design refer to EN60950-1,EN61347-1,EN61347-2-13 I/P-O/P:3.75KVAC SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH OTHERS NOTE EMC EMISSION Compliance to EN55032,EN61000-3-2 Class A,EN61000-3-3, EAC TP TC 020 EMC IMMUNITY Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A, EAC TP TC 020 MTBF 2275.8K hrs min. DIMENSION 60*30*23.5mm(L*W*H) PACKING 0.05Kg;144pcs/7.6Kg/0.75CUFT MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Derating may be needed under low input voltage, please check the static characteristic for more details. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. When applying DC voltage for input, please connect the brown input wire to the positive side whereas blue input wire to the negative side. 6. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model . Please contact MEAN WELL for details. 8. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:APC-8-SPEC 2018-09-29 APC-8 8W Single Output Switching Power Supply Mechanical Specification series Unit:mm 73.1 65.5 15010 8.5 UL1569 18AWG AC/N(Blue) AC/L(Brown) 30 12.5 60 +V(Red) -V(Black) tc 35 UL1569 20AWG 15010 : Max. Case Temperature 23.5 tc Block Diagram I/P fosc : 67KHz EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS +V -V PWM CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 45 50 AMBIENT TEMPERATURE () 60 70 (HORIZONTAL) 60 50 40 90 100 200 210 220 230 240 250 264 INPUT VOLTAGE (VAC) 60Hz File Name:APC-8-SPEC 2018-09-29