3.2x1.6mm SMD CHIP LED LAMP Part Number: AP3216QWF/D/SB White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 1.1mm thickness. The source color devices are made with InGaN Light Emit- z Low power consumption. ting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392 Selection Guide Part No. Dice AP3216QWF/D/SB Iv (mcd) [2] @ 20mA Lens Type White (InGaN) Yellow Fluorescent Viewing Angle [1] Min. Max. 21/2 120 360 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. Max. Units Test Conditions VF [1] Forward Voltage White 2.8 3.3 4 V IF=20mA IR Reverse Current White 50 uA VR = 5V pF VF=0V;f=1MHz X [2] 0.31 Chromaticity Coordinates White Y [2] C 0.31 Capacitance White 100 Notes: 1. Forward Voltage: +/-0.1V. 2: Measurement Tolerance Of The Chromaticity Coordinates Is 0.01. Absolute Maximum Ratings at TA=25C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392 White AP3216QWF/D/SB SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392 AP3216QWF/D/SB White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392 AP3216QWF/D/SB Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392 PACKING & LABEL SPECIFICATIONS AP3216QWF/D/SB SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392