SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
3.2x1.6mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: AP3216QWF/D/SB White
Features
z3.2mmx1.6mm SMT LED, 1.1mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The source color devices are made with InGaN Light Emit-
ting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Max. 2θ1/2
AP3216QWF/D/SB White (InGaN) Yellow Fluorescent 120 360 120°
Iv (mcd) [2]
@ 20mA
Parameter White Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
VF [1] Forward Voltage White 3.3 4 V IF=20mA
IR Reverse Current White 50 uA VR = 5V
X [2]
Chromaticity Coordinates 0.31
Y [2] 0.31
C Capacitance White 100 pF VF=0V;f=1MHz
White
Min.
2.8
Notes:
1. Forward Voltage: +/-0.1V.
2: Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01.
SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
White AP3216QWF/D/SB
SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
AP3216QWF/D/SB
White CIE
0.20
0.25
0.30
0.35
0.40
0.20 0.25 0.30 0.35 0.40
x
y
a2
a0
b1
b2
c0
x y x y x y
a2
0.263 0.213
a0
0.282 0.245
b2
0.298 0.271
0.282 0.245 0.298 0.271 0.313 0.296
0.265 0.265 0.286 0.299 0.306 0.332
0.242 0.226 0.265 0.265 0.286 0.299
b1
0.313 0.296
c0
0.329 0.325
0.329 0.325 0.358 0.372
0.329 0.371 0.363 0.400
0.306 0.332 0.329 0.371
Notes:
Shipment may contain more than one chromaticity regions.
Orders for single chromaticity region are generally not accepted.
Measurement tolerance of the chromaticity coordinates is ±0.01.
SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
AP3216QWF/D/SB
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAM0576 REV NO: V.1 DATE: AUG/29/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000392
PACKING & LABEL SPECIFICATIONS AP3216QWF/D/SB