LOW PROFILE LEADED INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWCR-RS AWCR-RS RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) FEATURES: * Built-in capacitors save space & components. * Low cost timing solution. * Small size, Light weight. APPLICATIONS: * Microprocessor clocks. * Electric appliances. * Remote controls. Size Varies | | | | | | | | | | | | | | * Industrial controllers. * General timing. ELECTRICAL CHARACTERISTICS: Parameters Frequency Range Resonant Impedance (Ro) Frequency Tolerance Frequency Stability Withstanding Voltage D.C. Voltage Rating Voltage A.C. Voltage Load Capacitance Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) Minimum 6.01 Typical -0.5 -0.3 12 500 -25 -40 -0.3 15 Maximum 12.50 25 +0.5 +0.3 100 6 15 18 +85 +85 0.3 Units MHz % % Vdc Vdc Vp-p. pF M C C % Notes -25C to +85C 5 secs 10Vdc, 1min From initial value TEST CONDITION AND TEST CIRCUIT: X: Ceramic Resonator C1=C2 1.Input 2.Ground 3.Output Parts shall be mea sured un der a cond ition (Temp.: 20 15 C, Humid ity: 6520% R.H.) un less the standard con dition (Te mp: 25 3C, Humidity: 65 10% R.H.) is regulated to me asure OPTIONS & PART IDENTIFICATION: AWCR Frequency Frequency in MHz ABRACON IS ISO9001:2008 CE RTIFIED RS - C Load Capacitance in pF Contact ABRACON for Load Capacitance options if not standard Packaging Blank: Bulk A: AMMO package* *AMMO package lead length 13.5mm Revised: 05.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com | LOW PROFILE LEADED LOW PROFILE LEADED LOW PROFILE LEADED LOW PROFILE LEADED INDUSTRIAL GRADE INDUSTRIAL GRADE BUILT-IN INDUSTRIAL BUILT-IN INDUSTRIAL GRADE GRADE BUILT-IN CAPACITANCE CERAMIC CAPACITANCE CERAMIC BUILT-IN CAPACITANCE CERAMIC RESONATOR CAPACITANCE CERAMIC RESONATOR RESONATOR RESONATOR RoHS/RoHS II Compliant AWCR-RS uly 19thth, 2012 5.5 x 3.0 x 5.0mm th Pb in ceramic, exemption (7c-I) ue: July 19 , 2012 5.5 x 3.0 x 5.0mm ly 19 , 2012 5.5 x 3.0 x 5.0mm of (10) Revision #: C Abracon Drawing # 452751 e (6) of (10) Revision #: C Abracon Drawing # 452751 f (10)OUTLINE DRAWING: Abracon Drawing # 452751 mensions e Dimensions ensions Bulk Pack AMMO Pack:Pack: AMMO AWCR-RS Size Varies | | | | | | | | | | | | | | Revision #: C AMMO Pack AMMO Pack: ack: Dimensions: mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prodmm uct will not be used within 1 year, it isDimension: recommended that the product be re-sealed in airtight packaging according Dimension: mm to MSL 1 requirements to maintain solderability. Dimension: mm CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability , life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. mm ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 05.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com | Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: AWCR-10.00RS AWCR-8.00RS AWCR-12.00RS